How to Have Your Windows Repaired and Still Enjoy Their Performance For Years to Come
Many homeowners are worried about the long-term durability of their window repairs. However, it is possible to have windows repaired and continue to enjoy their performance for many years to come.
The reason for the windows to be cloudy is moisture in the spaces between the glass panes. This can be addressed by cleaning the windows to remove the moisture and sealing the windows.
Foggy Windows
Foggy windows can make it difficult to see through your
windows doctor, obscuring the view and reducing the natural light entering your home. They can also cause water and moisture to build up on the glass, leading to wood frames and sills to rot over time. If your window is constantly fogging up it's likely to be due to condensation that's trapped between the two panes of your window. This is a common issue but shouldn't be ignored. Foggy windows can cause mildew, rot and mold to form in the frame of your house and decrease energy efficiency.
Condensation happens when warm, moist air cools on a cold surface It's not supposed to occur in your windows. If you have double-paned windows that are insulated, you will not experience this problem unless the seal has been damaged. The windows that appear cloudy are a sure indication of this. It's important to get them checked by a professional in order to determine if they need to be replaced.
The good news is that there are plenty of DIY solutions to help you combat windows that are hazy. Many homeowners suggest using a dehumidifier near the window to get rid of excess moisture. However, this will not resolve the issue, since moisture continues to build up between the window panes once the seal is broken.
Drilling holes in the top and bottom of your window panes is another common way to deal with a foggy glass. Then, you'll insert a desiccant such as silica into the holes to absorb moisture between your two panes of glass. After the moisture has been removed, you should allow the window to completely dry before sealing the holes.
While these DIY methods are effective, they're not a permanent solution, and you'll be likely to find that your windows will be prone to fogging in the future. Professional window replacement and installation will bring your windows to their original state. Contact a reputable window manufacturer today to find out more about how they can repair your windows and help you reduce the humidity inside your home.
Rotted Frames
Wood rot around window frames and sills can result in mildew or even mold, which could be harmful for your family's health. People who are allergic to molds may suffer from itchy eyes and skin, wheezing, stuffy nose, and breathing difficulties.
If the rot is confined to a tiny portion of the frame, it could be able to be repaired by using a wood filler epoxy. If the damage is significant or if decorative elements like mouldings cross-link with other elements of the frame, it is possible to invest in replacement windows.
If you're interested in knowing the extent of the rot that has occurred in your window frame, try using a screwdriver or putty knife. If you force your way into the rot and notice it sways easily, it's likely that the rot has penetrated deeply into the wood and will not be able to be fixed by using a simple wood filler epoxy.
Ideally, you should choose wood of the same type and moisture content as the surrounding windows to splice in replacement timber. This will ensure that the splice will be sturdy and will not cause any problems in the future. If you are unsure about your abilities to do this task, it's always recommended to contact a professional.
A common method of the splicing process is to treat the frame of wood that is already in place with wood hardener. This is a great method of stabilizing the existing timber and prevent further issues with decay. This should be done as fast as is possible after removing the affected rotten timber to allow the treatment to be effective.
If the window's rot is severe and can't be repaired with a splice or using a wood hardener, it might be necessary to replace the entire window in order to avoid further damage. This may be a bigger cost upfront, but it will be worth it in the end. You may also opt to upgrade to a window that is more energy efficient.
Muntins & Mullions
While they look the same, muntins are different from Mullions. Understanding the differences between these two parts can help homeowners make sure that they're on the same page with their window company.
Mullions are a vertical element that divides a single window into two panes. In the past they were used to hold smaller glass panes together to form larger expanses of window glass. Today, mullions are used for decorative purposes, however they can also be included in double-glazed windows to replicate the appearance of multi-paned windows without sacrificing efficiency in energy usage.
Muntins can also be narrow strips of wood used to separate the individual panes of glass. They can be put in as a permanent feature within a window or as a removable decorative accent. Depending on their construction muntins can be constructed out of either metal or wood. They can be stained or painted to match the colors of windows. In many homes, muntins can be an important focal point in an area, providing detail and dimension that enhance a window's visual size.
While they are primarily decorative, they can offer some added security to homes. Because they are located between windows, a break-in would require breaking one muntin and then removing another to gain entry. Muntins can also help keep debris and weather from entering homes when they are in good condition.
Very few window manufacturers make an effort to distinguish between muntins, mullions and the various kinds of mullions. These terms are often interchanged and even called grilles in informal usage. It is important to avoid this confusion, as it could be confusing for buyers of homes.
Modern windows do not require muntins or mullions even though they serve structural purposes. These window features are essential for both functional and aesthetically appealing windows. When selecting the best windows for your home, make sure to take into consideration the architectural style of your property and the amount of maintenance you are willing to take on. Select the window style that best reflects your needs.
Double-Pane Windows
Double-pane windows are famous for their energy efficiency and insulation properties. However
the glass doctor possibility of a break or crack in the window could significantly diminish these benefits and result in increased heating and cooling expenses as well as condensation and water damage to your home or office.
Double pane windows consist of two sheets of glass with a gap in between, which is typically filled with inert gases like Argon to stop heat transfer and further insulate the window. If one pane develops cracks or leaks, gas will escape, and your window will be less efficient.
If a double pane window appears to be foggy or shows visible condensation, the window seals have failed and allowing in moist air. This air will cause the silica gel pellets that are between the two panes to swell up, which leads to condensation inside the window. If a window is at this point, it will need to be replaced.
Many homeowners are worried about the cost to replace their double-pane window. However, it's important to consider the fact that replacing windows can be more cost-effective over time. Double-pane windows that are cracked, damaged, or
windowdoctor leaking will require repairs more often than a brand new window.