UPVC Window Handle ReplacementReplacing a damaged or broken window handle is a easy process, and with the right tools it can be done quickly. However, it is essential to identify the type of handle and the spindle length before buying a replacement.
Older uPVC window handles have a spur that protrudes and locks on the wedge striker for cockspur. They can be left or right-handed and must be to be replaced with the same handle.
What kind of lock and handle do I have?
There are a variety of upvc window locks and handles, each with its own advantages and purposes. The kind of handle you choose will determine the ease to open your windows and whether or not the locking mechanism works in the way you want it to. As time passes and with regular use, window handles made of upvc can become damaged or worn out, making them less secure and effective. In some instances they might even fall off completely. If you find that your window handles have fallen off, it's important to repair them as quickly as possible. This will help prevent burglaries and ensure that your home is secure.
The good news is that replacing your upvc window handles is a simple task that can be done by almost everyone. With just a few tools and the right knowledge, this is a simple process that shouldn't take longer than a couple of minutes. To begin you must determine the kind of lock and handle you have on your window made of upvc to help you find the perfect replacement.
Inline Espagnolette Handles
They are the most popular kind of upvc handle and are usually placed on the side of your window. They have a flat design and feature a latch that engages with the locking mechanism of the window frame when turned. Inline upvc handles have an elongated spindle that runs through middle of the handle to the window frame in order to control the latch.
Cockspur Handles
They are usually found on older uPVC windows and feature distinct hook-shaped designs. Cockspur handles are secured to the window frame by one screw, and are less secure than other kinds of window handle.
Tilt and Turn Handles
Unlike the other upvc handles, tilt and turn handles can be rotated to open the window, and the handle can be tilted to the side for ventilation. In general, they have a 7mm spindle on the back of the handle. They are available in left and right handed versions.
It is essential to know the spindle's size prior
UPVC Window Handle Replacement to purchasing a
replacement double glazed window upvc handle. There are a few that are the exact same size. Drop something in the middle of the hole to measure the length. This is the maximum size of spindle that will fit your windows.
What is the spindle?
uPVC window handles work in a similar manner like doors. By turning the handle, you are able to activate a latch inside the frame. The window is then opened and shut. However, sometimes handles can be damaged, particularly when they are used frequently or exposed to extreme weather conditions. This can leave you needing to replace your uPVC handles on windows since they may not be able to operate the window properly for a long time.
There are many types of uPVC handle options, including Espag, Cockspur, and Spaded handles. These handles are designed to fit into the uPVC frames in a variety of ways and each handle type has a particular spindle that is used to lock the mechanism into the window. It is crucial to know the type of handle installed on your uPVC windows so that you can replace it with the correct one.
You can determine the type of uPVC handle you have by looking at the base section of the handle. A snap-in cover is over the screw that holds the handle's base in place. Take it off and you should be able to see the second holding screw located at the opposite end of the base portion of the handle. After both screws are removed you should be in a position to pull the handle away from the uPVC window.
After you have removed the uPVC window handle, you will need to carefully unscrew the spindle that was previously attached to the locking mechanism. Note the length of the spindle. You'll need to purchase a replacement with the same length as the handle that was originally used and locking device.
The main issue with most uPVC window handle problems is that the spindle gets worn out and can no longer operate the locking mechanism. This could be due damage caused by constant use or a loosening of the locking mechanism or even rust over time. If this occurs, it is necessary to replace the window handle and locking mechanism to restore complete functionality to your uPVC windows.
How do I get rid of my old handle?
In the course of time and daily use, window handles may be damaged or destroyed, and when this happens, it is important to repair them as soon as you can to ensure the security of your home. It is simple to replace a worn or damaged handle. The job can be accomplished in under a minute without the need for special tools.
To take off the handle, you first need to remove the screw at the bottom of the handle. Once the screw has been removed, the handle will be removed. A second screw will be located at the bottom of the handle. This can also be removed. When both screws are removed the handle can be removed completely from the base of the window.
After the handle has been removed, take the new handle and align the fixing holes with the holes currently in the window frame. There may be a little sticker or caps on the new handle, so take them off them if needed and then screw the handle into place. It is crucial to verify that the handle works once it has been installed. Turn the handle and make sure that the lock mechanism is working.
Espag handles come with an extra spindle that is protruding from the handle and slots into a multipoint locking mechanism inside the window frame. Cadenza windows come with a blade with cutouts that are incorporated into the lock mechanism. Cockspur handles are long and hang over the outer frame of the window or the transom crossmember of the bar.
Once you have the new handle in place,
UPVC Window Handle Replacement you can insert the spindle into the lock in the window and then tighten it. Replace the snap-in cover and screw cap (if appropriate) after the handle is fixed. The handle is now ready to use by opening and closing the window a few times to make sure that it is working properly and securely.
How do I install the new handle?
It's not that difficult to change the handle on your windows made of uPVC. The process is simple. All you require is a screwdriver and a little bit of patience. The first thing you need to do is to ensure that the handle is locked and then take out any screws that are visible. you can replace them by screw caps if you need. After removing the handle, you will need to note the length of spindle that extends from the back. This is crucial since it will determine the kind of handle that you will need to purchase.
Espagnolette handles on uPVC are the most well-known type of handle. They have a spindle that is connected to the handle and operates a locking mechanism inside the frame of the window. The handle releases the latch and allows the window to open. When used regularly and time, espagnolette handles may be damaged.
Cadenza handles are another type of uPVC window handle that is commonly used on tilt and turn windows. They feature a protruding knife that operates a multiple-point locking mechanism inside the window. They are usually more secure than handles made of espagnolette because they can only be opened from the inside. You can replace them with the same method that you would for espagnolette handles, but make sure the new handle is angled, not flat.
Once you have determined the right handle for you, you can simply align the new handle with the existing screw holes and then screw it in place.