Replacement Handles For UPVC WindowsUPVC window handles are available in a variety of styles, but all of them operate the same locking mechanism. To replace a uPVC handle, remove the top screw from the bottom of the window handle which will reveal two screws.
Then, take a measurement of the spindle to make sure your new handle will fit. It's crucial to determine what kind of handle you've got because there are a variety of sizes.
Inline Espagnolette Handles
Most double-glazed windows come with Espagnolette handles which operate multi-point locks to provide greater security. The handle is controlled by a 7mm square spindle that connects to a gearbox inside the frame of the window. The gearbox is able to move the multi-lock mushroom as the handle turns. They are available in a variety of styles, including cockspurs keys, inline and locking handles.
Our uPVC
replacement windows prices handle kits are designed to make it easy to replace a damaged or faulty window handle with a espagnolette. These uPVC handles come with all the fixing screws and a range of spindle sizes suitable for all applications. These handles also come with key-plugs which allow them to be switched from the standard open/closed handles to egress or fire escape non locking handles (if they are fitted with the appropriate key plug).
If you are just looking for an espagnolette handle that can simply replace your existing window handles without changing the position of the mushroom plates, we recommend our Simplefit Inline Espag Handle with 3 Spindles. These handles are designed specifically for this purpose and they come ready to fit with a range of spindle lengths already inserted so you don't need to worry about cutting them down on site. The handles are also a good choice for new build or refurbishment projects due to their excellent value and easy installation.
Yale Sparta Inline Espag Handle is a different choice. It was designed to minimize aesthetic intrusion and has a reduced height at the base. It is part of the suited range of hardware and is available in a range of finishes all of which comply with the requirements of BS EN 1670:2007 Grade 5 corrosion resistance. They have been tested for their endurance and are suitable for use in coastal areas and with acidic timbers. They are compatible with cylinder-immobiliser inserts to lock keys where required.
Cockspur Handles
Cockspur handles, which are often found on older uPVC or aluminum doors and windows, are a simple latch-and-catch arrangement. The handle's nose slides into or into the catch which is a wedge block made of plastic mounted on the window frame. Because the wedges are available in different sizes, it is important that you know what step height you will need before purchasing a new handle. Generally, uPVC frames have a handle step of 9mm and aluminum frames usually have 21mm as the step size.
The cockspur handle can be locked by using a key, bringing security to your home. The lock is installed into the handle with an appropriate spindle that fits in the hole of the handle (also called a backset). The spindle has a 7mm square cross-section and is used to either open or shut the window.
If you are replacing a handle for a cockspur, it is worth ensuring that it has the same height for steps as the original. This is usually measured from the base spur of the handle to the underside of handle nose. This measurement can be referred to as the stack height or the backset. It is essential to be aware of this before ordering any handle.
Cockspur handles can be straight or universal or cranked, and are available in left hand or right handed versions. This permits the handles to be mounted on either the either the right or left opening window and provides the operator with an easier access.
Find out if your window requires a restrictor. This is designed to prevent the handle from opening past a certain point. These are usually required for high-rise flats or commercial buildings for safety reasons. The majority of homes do not require these.
There are a variety of styles and colors of cockspur handles, including stainless steel and white uPVC steel. The best choice for your windows will be based on your personal taste and style, as well as how you would like the window to perform.
Tilt and Turn Handles
The UK is home to a wide range of double-glazed windows featuring tilt and turn handles. They can be found on both upvc and timber windows. The handle can be turned at any angle, up to 180 degrees. This lets the window open into the room fully, and also to lower for ventilation. The handle is locked in this position, requiring keys to unlock the handle if needed to open it.
This type of handle is simple to replace, having only one large handle instead of several smaller ones. This can reduce the overall appearance of the handle and is more in line with the modern minimalistic design trends. They are also cleaner since they open to the inside.
They are also up to 8 times stronger than a conventional casement window. This makes them ideal for larger windows as well as doors. The frames are also made of steel, that adds durability and strength.
The tilt-and-turn mechanism is more secure than a casement since the handle can be locked in any position. This is especially important in areas where children could live, as it can keep them from accidentally opening the window.
Tilt and turn windows are a common choice for many homes, as they can be utilized in many ways. They can be opened horizontally as a regular window, dropped down in a hopper fashion to allow for ventilation, or tilted inwards to clean and
Replacement Handles For UPVC Windows maintain. This is an excellent option for those who wish to improve the airflow in their home and can also assist with noise reduction. They are also easy to clean and maintain because the glass is easily removable. They are available in various sizes and colors. These windows are ideal for any house, and can complement both traditional and modern styles.
Crank Handles
Crank handles are easy to operate and offer a great view of the outside without blocking the glass. These handles are commonly used on casement windows that are hinged at the side or awning windows. They have an mechanism that is similar to a window bar and linkage arm that supports the window sash that opens and closes by cranking the handle in a clockwise direction. In contrast to other types of handles, a crank window's mechanism and handle are subject to wear and tear, which could cause the gears to strip and the handle to cease working or fall off the operator shaft. By inspecting the crank handle and the mechanism of the operator regularly will ensure that they stay in good shape for many years to be.
A crank handle is made up of a shaft made of metal that rotates perpendicularly and is connected to an arm. The handle is rotated in a circular motion by grasping it and rotating it in the same way that you would operate a sharpener. In some cases the handle may be operated by the leg.
The base of the crank handle is hollow. This allows the handle to be connected to equipment and machinery. The handle's arm features an attaching bar that converts the circular motion from the handle into reciprocating and rotary motions to operate machines and equipment.
Boats are usually loaded onto trailers using crank handles, in addition to machines and equipment that can be adjusted. They are typically made of stainless steel, which is resistant to corrosion in marine environments. Due to this, the majority of boat crank handles are powder coated to shield them from damage and also to make them easier to clean.
If the crank handle on your window has stopped working or won't open the window, it might be time to replace it. Find the trim mounting screws within the window frame's track.