UPVC
Window Handle ReplacementIt's simple to repair a damaged window handle with the proper tools. It's important to know what kind of handle you have and its spindle size before you purchase a replacement.
Older uPVC windows feature cockspur handles for windows. They have an extension spur that can the lock of a wedge cockspur striker plate. These can be either left or right-handed and must be to be replaced with the same handle.
What kind of lock and handle do I need?
There are a variety of window locks and handles made from upvc each with its particular advantages and uses. The type of handle you own will determine if your locking mechanism is efficient and if it's easy to open the windows. Over time and through regular use, upvc window handles may become damaged or worn out, rendering them less secure and
Window Handle Replacement effective. In some instances they might even be completely removed. It is important to repair your window handles made of upvc as soon as you begin to notice them falling off. This will stop potential burglaries and protect your home from burglary.
It's a simple job that almost anyone can do. With just a few tools and the proper knowledge, this is a simple procedure that should take no less than a few minutes. You must know the kind of lock or handle you have on your window. This will help you select the appropriate replacement.
Inline Espagnolette Handles
They are the most popular type of upvc handles and are usually placed on the side of your window. They have a flat design and feature a latch that connects to the locking mechanism on the window frame when turned. Inline upvc handles have a spindle that goes through the center of the handle, and into the window frame to operate the latch.
Cockspur Handles
They are typically found on older uPVC window frames and feature a distinctive, hook-shaped design. Cockspur handles are secured to the window frame by only one screw and are less secure than other varieties of window handles.
Tilt and Turn Handles
In contrast to other upvc handles that are tilt and turn, these handles can be rotated to open the window and the handle can be tilted to the side for ventilation. They have a 7mm spindle on the back and are available both in right-hand and left-hand versions.
When buying replacement upvc handles it is essential to measure the spindle's length because not all handles are the same size. Drop something into the middle of the hole to check the length. This is the largest spindle size that will fit in your windows.
What is the spindle?
uPVC window handles work similarly to doors. By turning the handle, you can operate a latch within the frame. This opens the window so that it can be opened and closed. But, at times, handles can be damaged, particularly when they are used frequently or exposed to harsh weather conditions. This could mean that you have to replace your
upvc window handle replacement windows handles as they might not operate the window properly in the future.
There are many different types of uPVC handles, including Espag, Cockspur, and Spaded handles. They are made in a variety of ways to fit into uPVC frames. Each handle type uses a different spindle to lock the window mechanism. This is why it is important to know what type of handle you have on your uPVC window so you can find the right replacement.
The base section of the handle will tell the type of uPVC it is. There should be a "snap-in cover over one screw which holds the handle base in the correct position. Once you remove this and you'll be able to observe the second screw that holds the base of the handle in position. After both screws have been removed, you should be in a position to pull the handle away from the uPVC window.
After removing the uPVC handle, carefully unscrew it from the locking mechanism. Take note of the length of the spindle. You'll need to purchase a replacement with the same length as the handle that was originally used and locking device.
The primary issue with window handle problems with uPVC is that the spindle becomes worn out and can no longer operate the locking mechanism. This could be due to corrosion, damage from constant use or a loosening locking mechanism. If this occurs, it will be necessary to replace the window handle and the locking mechanism to restore complete functionality to your uPVC windows.
How do I remove the handle from the previous one?
In the course of time and daily use, window handles may become damaged or broken, and if this happens it is crucial to repair them as soon as you can to ensure the safety of your home. It is simple to replace a worn or damaged handle. The task can be accomplished in less than a minute without the need for special tools.
The first step to remove the old handle is to remove the screw that is located at the top of the handle base. Once this is removed the handle will be pulled away from the base. A second screw is located at the base of the handle. This too can be removed. Once these two screws are removed, the handle can be detached from the base of the window.
Once the old handle has been removed, grab the new handle and align the fixing holes with the holes that are currently in the window frame. If there is a cap or sticker on the new handle remove it if necessary and then screw the handle into the appropriate position. Once the handle is in place, it is important to test whether it functions by turning the handle and making sure that the lock mechanism is activated.
Espag handles have an elongated spindle that extends from the handle and slot into a multipoint locking mechanism inside the window frame. Cadenza windows come with a blade with cutouts which fit into the lock mechanism. Cockspur handles are long and hook over the frame that surrounds the window or the transom crossmember of the bar.
After you have installed the new handle, place the spindle into the window lock and tighten it. Once the handle is firmly fixed then replace the snap-in cover and the screw cap (if applicable). When the handle is in use, open and close the window a couple of times to make sure that it functions properly and securely.
How do I install the new handle?
Changing your uPVC window handle isn't difficult and the process is actually very simple. All you need is a screwdriver, and a little bit of patience. First, make sure that the handle that you are replacing is unlocked. Remove any visible screws. You can also replace them using screw caps. Once the handle is removed and you are ready to take an outline of the length of the spindle that extends from the back of the handle. This is crucial as it will determine the kind of handle that you will need to buy.
Espagnolette handles are the most common kind of handle that is used on uPVC windows. The spindle passes through the handle to control the locking mechanism in the frame of the window. Once the handle is turned it releases the latch on the window, allowing it to open. During regular use and time, handles for espagnolette may be damaged.
Cadenza handles are a kind of uPVC handle that is usually used in tilt and turn windows. They feature an elongated blade that functions as the multipoint locking mechanism inside the window. They are usually more secure than espagnolette handles since they are only accessible from the inside. You can replace them using the same method that you would with espagnolette handles however, ensure that the new handle is angled, not flat.
After you have chosen the right handle, simply align the new handle to existing screw holes before fixing it with screws. After that, you can put the screw covers on and test your new handle. You can do this by dragging the handle back and forth from the locked position to the unlocked several times. It may be worth contacting an expert to see if you can resolve any issues.