UPVC Window Handle ReplacementIt's simple to repair a damaged window handle with the proper tools. However, it is essential to identify the handle's type and spindle length before buying a
replacement windows.
Older uPVC window handles have a spur which protrudes and locks over the wedge striker for cockspur. These can be left- or right-handed, and must be matched when replacing.
What type of lock and handle do I have?
There are many kinds of upvc window handles and
UPVC Window Handle Replacement locks, each with its particular advantages and uses. The type of handle that you have will determine whether or not the locking mechanism you have is effective and if it's easy to open windows. As time passes and with regular use, window handles made of upvc may become damaged or worn out, rendering them less secure and efficient. In some instances, they could even fall completely off. It is crucial to fix your window handles made of upvc when you begin to notice them falling off. This will stop potential burglaries and protect your home from burglary.
It's a simple job that almost anyone can do. You'll require a few tools, but with proper knowledge, it's simple and should take only a couple of minutes. You will need to know the type of lock or handle you have on your window. This will help you select the right replacement.
Inline Espagnolette Handles
They are typically located on the sides of the window. They are flat and come with an opening that engages the locking mechanism of the window frame. Inline upvc handles have a spindle that runs through the middle of the handle into the window frame in order to control the latch.
Cockspur Handles
These handles are typically found on older uPVC windows and feature distinct hook-shaped designs. Cockspur handles are attached to the frame of the window with one screw, and are less secure than other kinds of window handles.
Handles that turn and tilt
As opposed to the other upvc handles the tilt and turn handles can be turned to open the windows and tilted inwards to allow ventilation. They feature a 7mm spindle on the back and are available in right and left-handed versions.
It is essential to know the spindle's size prior to purchasing a replacement upvc handle. There are a few that are exactly the same size. Drop something in the middle of the hole to test the length. This is the maximum spindle size that will fit into your windows.
What is the spindle?
uPVC window handles work in a similar manner like doors. By turning the handle, you can operate a latch within the frame. The latch opens the window, so it can be opened and closed. The handles can become damaged, especially if used frequently or exposed to harsh conditions. It is possible to replace the handles on your uPVC window if they are not operating properly.
There are many different types of uPVC handles, including Espag, Cockspur, and Spaded handles. These handles are designed to fit inside the uPVC frames in different ways, and each type of handle uses a specific spindle to lock the mechanism fitted to the window. It is important to identify the type of handle installed on your uPVC windows to ensure that you replace it with the correct one.
The base of the handle will tell you what type of uPVC it is. A snap-in cover should be over the screw that holds the base of the handle in position. When you remove this cover, you will be able see the screw that holds the base of the handle in place. After both screws are removed then you should be able to take the handle out of the uPVC.
Once you have removed the uPVC window handle, you have to remove the spindle that was previously attached to the locking mechanism. Be sure to note the length of the spindle since you will need to ensure that you purchase an alternative that is the same length as your original handle and locking mechanism.
The most common issue with window handles made of uPVC is that the handle spindle gets worn-out and is unable to longer work with the locking mechanism. This could be due to corrosion, damage caused by constant use or the locking mechanism becoming looser. If this happens, you'll have to replace both the window handle and locking mechanism in order to restore the full functionality of your uPVC Windows.
How do I get rid of my old handle?
Window handles can become damaged or even broken over the course of time. It is essential to fix them as quickly a possible to ensure your safety. It is easy to replace a damaged or worn handle. The task can be accomplished in less than an hour without the need for special tools.
The first step in removing the handle that was previously used is to take off the screw located on the top of the base of the handle. After the screw is removed, the handle will be pulled away. A second screw will be situated at the base of the handle. It can also be removed. When both screws are removed, the handle can be completely detached from the base of the window.
After removing the old handle and align the fixing holes of the new handle to the existing holes in the window frame. If there is a sticker or cap on the new handle remove it if needed and screw the handle into place. It is important to check that the handle works once it is put in place. Turn the handle around and make sure that the lock mechanism is working.
Espag handles have spindles that extend out of the handle and slot into the multipoint locking mechanism that is on the frame of the window. Cadenza windows come with an edge with cut-outs which slot into the lock mechanism while Cockspur handles have an extended nose that hangs over either the outer frame or transom bar cross member inside the window.
After you have put in the new handle, place the spindle inside the window lock and tighten it. When the handle is fixed and secured, replace the snap-in cover and the screw cap (if necessary). Once the handle is ready for use, simply open and close the window a couple of times to make sure that it functions correctly and securely.
How do I install the new handle?
The process of changing your window handle made of uPVC isn't difficult, and the process is quite simple. All you need is an screwdriver and a bit of patience. The first step is ensure that the handle you have previously used is locked and then remove any screws that are visible. you can replace them with screw caps if required. After removing the handle it is necessary to take an outline of the length of the spindle that protrudes from the back of the handle. This is vital because it will determine the kind of handle to purchase.
Espagnolette handles that are made of uPVC are the most sought-after kind of handle. They feature a spindle that is inserted into the handle and acts as an internal locking mechanism within the frame of the window. The handle releases the latch, allowing the window to open. In regular use and over time, espagnolette handles may be damaged.
Cadenza handles are a different kind of uPVC window handle that is commonly used on tilt and turn windows. They feature a protruding knife that works with a multiple-point locking mechanism inside the window. They are generally more secure than espagnolette handles as they are only accessible from the inside. They can be replaced with the same procedure as espagnolette handles, however you will need to make sure that the new handle has a curved blade as opposed to flat ones.
After you have chosen the correct handle, simply align the new handle to existing screw holes before screwing it into place. After that,
UPVC Window Handle Replacement you should put the screws back on and make sure the new handle is working properly. You can do this by dragging the handle between the locked position to the unlocked one several times. It may be worth contacting an expert to determine how you can fix any issues.