ghost immobiliser 2 (
Click On this website)
Secures your vehicle from key cloning & stopping thieves driving it using the keys you originally had. Our most recent immobiliser is connected to the CAN data network in your vehicle and a unique PIN has to be entered in order to start the engine.
In contrast to trackers, Ghost doesn't transmit any radio frequency signals and can't be detected by diagnostic tools. There are also no LED indicators or buttons that can give the impression of its presence in your vehicle or van.
Anti-key Cloning
The Ghost immobiliser was created to combat key cloning. The device connects to the CAN data network in your vehicle and creates an unique pin code push sequence by using the buttons from the factory on your dashboard as well as the steering wheel. This will stop the thief from being able to start your car. If the wrong PIN code is entered, your engine cannot be started which makes it impossible for them to leave with your pride and joy.
Ghost immobilisers employ a new technology which is extremely difficult for thieves to defeat. In contrast to physical deterrents such as wheel locks and steering locks that can be cut off or jacked, the ghost immobiliser is a discreet electronic device that cannot be easily detected by regular thieves since it doesn't emit radio signals and operates in a silent manner.
The next-generation immobiliser protects your vehicle from a range of threats, including key-hacking relay attacks, key hacking and cloned copies. It also stops thieves from stealing keys or replacing your ECU since it will not allow them to start the vehicle without entering the correct PIN code.
The ghost immobiliser 2 unlike other immobilisers does not require the use of a remote control or key fob to operate. It is deactivable using an app on the driver's smartphone. This is ideal when you have to hand your car away for valet parking, or for servicing without the key fobs.
The Autowatch Ghost-II represents the latest version of the Ghost's immobiliser. It was designed to be as easy and convenient to use as possible, but remains as secure as ever. This is accomplished by integrating the Ghost-II with the vehicle's CAN data network. This means that there aren't any wires that could be concealed or easily found. It also comes with a built-in feature that allows users to deactivate their Ghost-II by connecting it to the vehicle's Bluetooth, so you can go out and drive with no hassle.
OBD port hacking
OBD port hacking has become the latest technique used by professional car thieves. Thieves can gain access to your vehicle's OBD by using the help of a laptop, mobile application, and cables that are available on the internet for less than PS50. Once they have access to your vehicle's OBD port, they can do whatever they want, from changing fault codes and tuning your car to taking away your pride and joy in under a minute.
If you have an Ghost immobiliser installed, it will prevent your car from being stolen with this method by making sure that an unique PIN code sequence is entered into your key fob in order to start the engine and then drive away. It communicates with the vehicle's ECU (Engine Control Unit) by using the CAN Data Circuit. This is undetectable by any scanning technology, RF or code grabbing. It even comes with a Service/Valet option that will allow your vehicle to start without the need for a PIN code.
You will also need an OBD cable that has OBD pins that connect to the CAN bus. These cables can be found on eBay or Amazon for around PS50. You'll also require a cable that has OBD pins that are connected to the CAN Bus. These cables can be bought on eBay or Amazon for PS50. You then need to splice the cable into the wire harness of your car for example, in the radio wiring harness.
Once the hacker has gained a connection to your vehicles OBD port, they will send diagnostics requests to the system at high baud rates which will crash the CAN and stop systems inside your car from working. This can cause the engine to stop and doors to lock, or even the brakes to activate.
No additional remotes or key fobs required
The car immobiliser is a great piece of anti-theft technology that is used by billions modern vehicles all over the world. An aftermarket immobiliser safeguards your vehicle through the use of engine ECU software that prevents cars from starting when an untrue transponder signal is sent.
It is possible for thieves in the event that they know the code to deactivate an immobiliser, and bypass it. A thief could easily remove the battery from most key fobs by squeezing them open. They can then use an instrument to remove the internal circuit board of an immobiliser and replace it with a blank. They will then be able start your vehicle.
With the TASSA approved Ghost 2 immobiliser, there are no remotes or keys to be purchased. The immobiliser communicates with the vehicle's engine ECU (Engine Control Unit) via a discrete and silent CAN data circuit that is unnoticeable with diagnostic tools such as those used by high-tech thieves. It does not include a traditional keyfob, which has an LED indicators, so it's not visible.
There will be instances that you must deactivate Autowatch Ghost 2's automatic protection, for example during the valet parking or servicing. Ghost CAN immobilisers have a mode called 'Service Mode that is activated with just a click of a button on your phone. The car is still operated however the maximum speed is restricted to 36 mph for added security.
Contact us today to schedule an appointment for a demonstration in our workshop. A member of our team will explain how the system works, and give you your Ghost 2 emergency card, installation certificate, and security guarantee.
Simple Change of PIN Code
Ghost is the next-generation device that secures your vehicle without cutting wires or installing key fobs from an aftermarket. It connects directly with the vehicle's CAN data network. A personal PIN can be created using buttons on the dash and steering wheel. The system stops engine start and can't be bypassed because no RF signals are generated from the device. This makes it difficult to detect by sophisticated scanning and RF technologies that are used by modern thieves.
The PIN code sequence can be altered whenever you want to lock out prior
Ghost immobiliser 2 drivers, and it even has an override code in the event of a sequence that is not remembered. During installation, the installer will demonstrate how to do this. The system has a valet-mode feature that can be used to temporarily disable pin input sequences so that your mechanic or garage can service the vehicle without having to know the code. This is great for customers who wish to surrender their car to valet parking / service but don't want to divulge the pin sequence.
Ghost is an unobtrusive system that utilizes the buttons on your car to create a unique and interchangeable PIN sequence. This sequence is entered using the smartphone app,
Ghost immobiliser 2 meaning no extra LED indications are being thrown, and your vehicle is secure and safe from the possibility of being disabled by hackers or any other technology.
Every vehicle is tested
In contrast to key fobs that require you to press buttons on them the ghost immobiliser is discretely placed under your steering wheel or dash so that only you know it's even there. The device is connected to your vehicle's CAN data network, and the personalised PIN code is programmed into it using buttons that are already present on your car. The system won't permit your car to start until this code is entered. This means that thieves are unable to duplicate the keys of your car or use the OBD to hack into it.
Ghost is a feature that can be found in all vehicles, including electric cars, vans motorhomes and bikes.