UPVC Window Handle Replacement
It is easy to repair a damaged window handle with the proper tools. It is essential to know what kind of handle you have as well as the size of its spindle before you purchase the replacement.
Older uPVC window handles have a spur that extends and is locked over the wedge striker. They can be left or right-handed and
UPVC Window Handle Replacement need to be matched when replacing.
What type of lock or handle do you have? I have
There are a variety of upvc window handles and locks, each having their own benefits and purposes. The type of handle you choose will determine whether or not your locking mechanism is efficient and if it is easy to open windows. With time and regular usage, the window handles made of upvc can become damaged or worn out, rendering them less secure and effective. In certain instances, they might even fall off completely. It is important to repair your upvc window handles when you notice they are falling off. This will help prevent burglaries, and
UPVC Window Handle Replacement keep your house safe.
The good news is that replacing your upvc window handles is a simple task that is achievable by almost anyone. You will need some basic tools, but with the appropriate knowledge, it's an easy task that will only take a few minutes. To begin, you will need to determine the type of lock and handle you have on your upvc window to help you find the perfect replacement.
Inline Espagnolette Handles
They are usually found on the side of the window. They have a flat design and come with a latch that engages with the locking mechanism on the frame of the window when it is turned. Inline upvc handles also come with spindles that run through the middle of the handle, and into the frame of the window to activate the latch.
Cockspur Handles
They are typically found on older uPVC window frames. They have distinct hook-shaped designs. Cockspur handles are attached to the window frame by a single screw and are less secure than other kinds of window handles.
Tilt and Turn Handles
The tilt and turn handles differ from other handles made of upvc in that they can be rotated for opening the window, and then lowered into the window to ventilate. Generally, they feature a 7mm spindle on the back of the handle and are available in both left and right handed versions.
When you are purchasing replacement handles for upvc, it is important to verify the length of the spindle since not all of them are identical in size. To test the length of your upvc handle, simply drop something into the middle of the hole and then measure how far it extends before it comes into contact with an obstruction. This is the maximum spindle size that will fit into your windows.
What is a spindle?
uPVC window handles function similar as doors, with the user turning the handle to activate an internal latch within the frame. The window is then opened and shut. The handles could be damaged, especially if they're often used or are exposed to harsh conditions. You may need to replace the handles on your uPVC window if they're not functioning properly.
There are many types of uPVC handles, including Espag, Cockspur, and Spaded handles. These handles are designed in a variety ways to fit into uPVC frames. Each handle type uses an individual spindle to lock the window mechanism. This is why it is important to identify the kind of handle you have on your uPVC window so you can find the right replacement.
The base section of the handle will inform the type of uPVC it is. There should be a "snap-in' cover over one screw which holds the handle base in place. Take it off and you should be able to see the second holding screw on the opposite side of the base section of the handle. After both screws are removed you should be able to pull the handle away from the uPVC window.
Once you have removed your uPVC window handle, you will need to carefully unscrew the old spindle from the locking mechanism. Make note of the length of the spindle, as you'll need to ensure that you purchase one that is the same length as the original handle and locking mechanism.
The spindle wears out and becomes inoperable with the locking mechanism. This could be due wear and tear from continuous use, a loosening of the locking mechanism, or even rust over time. If this happens, you will have to replace both the
glass window replacement handle and locking mechanism in order to restore the full functionality of your uPVC Windows.
How do I take off my old handle?
Window handles are susceptible to being damaged or broken over time. It is essential to fix them as quickly as possible to ensure your safety. The good news is that replacing a worn or damaged handle is a simple job that can be completed in just over an hour and doesn't require any special tools.
To remove the old handle, you must first remove the screw that is located at the base of the handle. Once this is removed the handle will be pulled away from the base section. There is a second screw that is located at the bottom of the handle base, and this can be removed as well. When both screws are removed the handle can be removed from the base section of the window.
After removing the handle, align the fixing holes of the new handle with the existing holes in the window frame. If there is a cap or sticker on the new handle remove it if required and screw the handle in place. It is important to check that the handle is working after it is installed. Turn the handle around and make sure that the lock mechanism is activated.
Espag handles come with a spindle that protrudes from the handle and slot into a multipoint locking mechanism within the frame of the window. Cadenza windows feature blades with cut-outs that slot into the lock mechanism, while Cockspur handles have a long nose that hooks over either the frame's outer or the transom bar cross member in the window.
After you have put in the new handle, place the spindle into the window lock and tighten it. Once the handle is firmly fixed, replace the'snap in' cover and the screw cap (if necessary). Now that the handle is ready to use, open and close the window a couple of times to ensure it works correctly and securely.
How do I install the new handle?
It's not difficult to alter the handle on your uPVC windows. The procedure is easy. All you require is a screwdriver and a little bit of patience. First, ensure that the handle is not locked. Remove any visible screws. You can also replace them using screw caps. After the handle has been removed, you need to make an note of the length of the spindle that extends from the back of the handle. This is vital as it will determine what kind of handle to purchase.
Espagnolette handles are the most popular type of handle used on uPVC windows. The spindle passes through the handle to activate the locking mechanism inside the window frame. Once the handle is turned it opens the latch on the window and allows it to open. During regular use and time, handles for espagnolette may be damaged.
Cadenza handles are another type of uPVC window handle commonly used on tilt and turn windows. They feature an extended blade that works a multipoint locking mechanism within the window. They are more secure than espagnolette handles since they only open from the inside. They can be replaced using the same procedure as you would for espagnolette handles however, make sure that the new handle is angled and not flat.
After you have chosen the correct handle, you can align the new handle with existing screw holes before screwing it in place. After that, you can put the screws on and test the new handle. This is done by shifting the handle from the locked to the unlocked position and the reverse direction a few times. It might be worthwhile to speak with an expert to see if you can resolve any problems.