UPVC
Window Handle ReplacementReplacing a damaged window handle is a simple process and with the right tools it can be done quite quickly. It is important to know what kind of handle you have and the spindle's size before you purchase an alternative.
Older uPVC windows use handles with cockspurs, which have spurs that protrude to secure a wedge-shaped cockspur striker plate. They can be left or right-handed and must be to be replaced with the same handle.
What kind of lock or handle do you have? I have?
There are many windows locks and handles made of upvc each with their own advantages and
window handle Replacement purposes. The type of handle that you choose will determine if your locking mechanism is effective and if it is easy to open windows. As time passes and with regular use, upvc
window seal replacement handles can become damaged or worn out, making them less effective and secure. In some instances they might even fall off completely. If you notice that your upvc window handles have fallen off, it is essential to repair them as quickly as you can. This will help to stop potential burglaries and ensure your home is secure.
It is a good thing that replacing your window handles made of plastic is a simple task that can be completed by nearly everyone. You will need some basic tools, but with the appropriate knowledge, it's simple and should only take a couple of minutes. You will need to be aware of the type of lock or handle you have on your window. This will help you choose the appropriate replacement.
Inline Espagnolette Handles
They are usually found on the side of the window. They are flat in design and feature a latch that connects to the locking mechanism on the frame of the window when it is turned. Inline upvc handles also have spindles that run through the center of the handle, and into the frame of the window to operate the latch.
Cockspur Handles
These handles are usually found on older uPVC window frames. They have distinct hook-shaped designs. Cockspur handles are secured to the window frame by one screw, and are less secure than other kinds of window handle.
Handles that tilt and turn
Unlike the other handles made of upvc that are tilt and turn, these handles can be rotated to open the windows and the handle can be tilted to the side for ventilation. They feature a 7mm spindle in the back and are available in left and right-handed versions.
When buying replacement upvc handles It is crucial to measure the spindle's length since not all of them are identical in size. Drop something in the middle of the hole to check the length. This is the largest spindle size that will fit your windows.
What is a spindle?
uPVC window handles work in a similar way to doors. By turning the handle, you are able to activate a latch inside the frame. This unlocks the window so it can be shut and opened. But, at times, the handles may become damaged, especially when they are frequently used or exposed to extreme weather conditions. It is possible to replace the handles on your uPVC window if they are not operating properly.
There are several different types of uPVC handles that are available, comprising Espag, Cockspur and Spaded handle options. These handles are designed in a variety ways to fit into uPVC frames. Each handle type utilizes an entirely different spindle for locking the window mechanism. This is why it is crucial to identify the kind of handle you have installed on your uPVC window so you can find the right replacement.
You can determine the type of uPVC handle you have by looking at the base section of your handle. There should be a'snap in cover' over one screw which holds the handle base in the correct position. Remove this and then you should be able to see the second screw at the opposite end of the base of the handle. After both screws have been removed,
Window handle replacement you should be able take the handle out of the uPVC.
Once you have removed your uPVC window handle, you will need to carefully unscrew the spindle you have removed from the locking mechanism. Make note of the length of the spindle, as you'll need to ensure that you purchase a replacement that has the same length as your original handle and locking mechanism.
The most common issue with window handle problems with uPVC is that the spindle gets worn out and cannot longer operate the locking mechanism. This could be due to corrosion, damage from continuous use, or even the locking mechanism becoming looser. If this happens, you'll need to replace both the window handle and locking mechanism to restore the full functionality of your uPVC Windows.
How do I get rid of the handle from the previous one?
Window handles are susceptible to being damaged or broken over time. It is crucial to fix them as soon a possible to ensure your security. Fortunately, replacing a damaged or worn handle is a simple task that can be completed in just over one minute and doesn't require any specialist tools.
To take off the handle, you must first remove the screw at the base of the handle. Once the screw is removed, the handle will be removed from the base. Another screw will be located at the base of the handle. This can also be removed. When both screws are removed, the handle can be removed from the base of the window.
After the handle has been removed, grab the new handle and align the fixing holes with the holes present in the window frame. If there is a sticker or cap on the new handle remove it if needed and put the handle back in the appropriate position. It is important to check that the handle is working after it has been installed. Turn the handle over and make sure the lock mechanism is activated.
Espag handles come with an extra spindle that is protruding from the handle and slot into a multipoint locking mechanism within the window frame. Cadenza windows come with a blade with cutouts that fit into the lock mechanism. Cockspur handles are long and hook over the frame of the window or the transom crossmember of the bar.
Once you have the new handle in place, insert the spindle into the lock in the window and then tighten it down. Replace the snap-in cover and screw cap (if applicable) once the handle is fixed. The handle is now ready for use to use, so try opening and closing the window several times to make sure that it functions well and securely.
How do I install the new handle?
The process of changing your window handle made of uPVC isn't difficult and the process is quite simple. All you need is a screwdriver, and a bit of patience. The first step is ensure that the handle is locked and then remove any screws that are visible, you can also replace them with screw caps if required. After removing the handle and you are ready to take an outline of the length of the spindle that protrudes from the back of the handle. This is important as it will determine what kind of handle to buy.
Espagnolette handles are the most popular kind of handle that is used on uPVC windows. They feature a spindle that is inserted into the handle, and is responsible for an internal locking mechanism within the frame of the window. When the handle is turned it opens the latch on the window and allows it to open. As time passes and with regular use, espagnolette handles can be damaged or damaged which is why it is essential to locate a replacement.
Cadenza handles are a second type of uPVC window handle, which is typically used on tilt and turn windows. They feature a protruding blade that works with a multiple-point locking mechanism within the window. They are more secure than espagnolette handle as they can only open from the inside. They can be replaced by the same procedure as espagnolette handles but you will need to ensure that the new handle has an angled blade as opposed to a flat one.