double glazing repair Glazing Door Lock Repairs
Are you experiencing issues with your uPVC window or door mechanism not working properly? Maybe the window or door handles aren't able to connect properly or are difficult to use.
You will lose energy if your double-glazed doors don't function properly. This increases the likelihood of burglaries. Owen the Locksmith can fix your door lock at an affordable price.
Snapped Key
When a key snaps off in the lock, it can be incredibly difficult. It's also potentially a security risk since the door may not lock and leave you vulnerable to burglars. There are fortunately simple fixes you can try to resolve the problem and get your door operating correctly.
Be sure to remain calm. If you panic you may end up pushing the damaged key further into the lock.
Spray WD-40, or another penetrating oil, into the lock. This will assist the broken piece be removed more easily. You can also use the screwdriver to break up any pieces stuck. If you have a piece of the key that's still sticking out, grab it with a paperclip or other thin metal object and pull it. Both methods work, but you must be careful not to push the damaged key further into the keyway.
Some paperclips have grooved edges, which can serve to extract hooks, and some Jigsaw blades also work for this purpose. If you don't happen to have one of these tools, you can bend a hook using needle-nosed pliers. Finally,
double glazing repair you can use a pair of tweezers grab and pull out the last piece of broken keys.
If you are unable to get the broken piece of key out, try using a lock de-icer. It's available in many hardware stores and is used to freeze any moisture that may be present in the lock.
If none of these solutions work, it might be time to contact a locksmith. Fitlocks specialists are able to quickly solve problems with uPVC door locks and mechanisms, including snapped keys and broken handles. They can also reconfigure the double glazing door mechanisms to ensure that they are more easy to use. Book a
double glazing repair with us online or give us a phone call to discuss your requirements.
Broken Cylinder
A damaged cylinder could pose a major security risk. A locksmith professional can repair the cylinder. To fix the cylinder a locksmith will need to tap it. They can do this with a hammer or other tools, but the most effective method is to employ an extended match or piece of wire. Then, place the end of the match or wire in the keyway. The locksmith will then strike the lock in order to break it. This is much safer than using a hammer that could cause damage to the lock.
Overheating is the most common cause of cylinder heads cracking. This can happen when the cylinder block and head are made from different metals, such as cast iron and aluminum. Different metals can heat up and cool off at different rates. This can cause localized hotspots to expand faster than the rest of the cylinder.
Another reason that could cause cracks in cylinders is corrosion. If the cylinder head and cylinder block are not maintained properly, this could lead to rusting or corrosion and cause them to expand at a greater rates than they should. As time passes, this may cause cracks.
If your uPVC door or window lock is stiff or requires an enormous amount of pressure to turn, it could be due to a number of things. A faulty locking mechanism, misalignment, or an old handle are the most common causes of this issue.
Fortunately it is a simple and inexpensive fix for most homeowners of double glazing. A professional locksmith will usually solve this issue within an hour of arriving at the home. Depending on the needs of your home, they can replace the locking mechanism, replace the window handles, or change the gearboxes. A skilled locksmith will always be able to inform you of the most cost-effective option for your home. They can recommend upgrading to 3 Star TS007 Euro Cylinders, which provide an additional security layer from burglars. It's a small amount to enjoy the peace of mind that comes from knowing your
upvc repairs near me door is secured.
Broken Handle
Window handle locks have intricate mechanisms that become less effective with time and use, so it's not a surprise that they sometimes break. It isn't always easy to pinpoint the reason for the problem and repair it correctly.
Fixing the broken handle, whether it's the internal latch or the locking mechanism can increase the security of your uPVC door and reduce the risk of draughts. Incorrectly repairing or replacing the handle could be costly and may damage the door's frame and lock, so it's worth taking some time to do it right.
Screwdriver: With the window open and the screw loose, loosen the handle. The screw should be located on the inside of the backplate, which is usually hidden by a screw cap for aesthetic purposes. Be careful not to lose any of the internal components within the handle, such as the plates or levers that are on the opposite side of the spindle. Ideally, keep these in the same order so you can replace them again in the event of a need.
Next, turn the handle so it's at 90 degrees to the window frame. Finally, loosen the screw at the back of the handle that holds it to the internal spindle with another screwdriver. Once the screw is removed, you should be in a position to pull the handle away and pull off the damaged spindle. Replace this with a new one, making sure it's the same length as the old one (you will typically find them on the internet or at hardware stores) and securely screw it in the correct position. Don't over tighten the screw because this could cause damage to the handle and window frame.
Close the handle and test it. Hopefully, it will work smoothly and you'll be able to open your window again.
Be sure to double-check that your uPVC window is shut properly while you're working with the handle. If they aren't closing properly, you could experience damp or draughts inside your home. You could also compromise the energy efficiency of your home. A local window company, such as Core Sash Windows, will be in a position to adjust the hinges on your window frames so they shut correctly.
Broken Spindle
It is more likely for the spindle to break rather than the handle. This is most common in uPVC tilt-and-turn windows. These kinds of windows require a handle that acts as a locking mechanism within the window frame. The handle is attached to a rod in the centre that in turn activates mushroom-like locking cams, these locks are inserted into the window frame. If the dead latch mechanism does not open when the handle is turned it is likely that the spindle has broken, this can be a very frustrating issue.
Luckily, there are options to rectify this issue. A reputable locksmith will be able to quickly and efficiently repair this issue. They can take apart the window handle using a tool that removes the wheel part of the mechanism, where the spindle goes. This can be done without causing any damage to the handle or causing other damage to the frame of the window.
Once the wheel is removed, the technician can inspect the spindle and determine what has caused it to break. This involves disassembling the spindle and inspecting each component part, noting any damage or excessive wear. This procedure is typically carried out by technicians in a clean and safe environment.
The next step is to clean the damaged spindle. This will remove any dirt or other debris that could be hindering its normal function. The spindle could be replaced or repaired. If it is replaced, the technician can take a dowel of a similar size to the one used in the first and drill mating holes in both pieces of the spindle. This will ensure that the spindle will fit perfectly with the handle.
If the damaged spindle can't be repaired it may need to be replaced entirely.