Why You Need a
Ghost 2 Immobiliser Fitting Near MeModern day thieves can take vehicles in just a minute. They use the OBD port of the car to hack into the ECU and then duplicate keys and all with a laptop that is hidden inside the vehicle.
The Autowatch Ghost immobiliser will prevent this by sending pin codes to the buttons on your vehicle (steering wheels and central console). It is completely inaccessible to anyone in your car.
No key fobs or LED indicators to reveal the location of the vehicle.
The ghost immobiliser is the most effective method to protect against keyless entry theft and key cloning. This device safeguards your vehicle from these kinds of attacks by preventing the engine from running after a valid pin code has been entered. This is an extremely efficient method of safeguarding your car, and even insurance companies recognize it as a security measure that could help lower the cost of your policy.
The
ghost immobiliser for sale is connected to the CAN data network in your vehicle. Once installed by Car Theft Solutions, it will only work when you enter your personal code for override and a specific button combination. The engine will not begin if you try to start your vehicle without using the code. The thief will then realise that they have been caught and are likely to abandon the vehicle and run off.
This system has the advantage of not transmitting any signals like a tracker. Thieves aren't able to make use of RF receivers to pinpoint your Ghost unit's location. It doesn't emit IR (infrared signals) as do typical remote control key fobs as well as trackers, making it very difficult to hack or bypass.
Another advantage of the ghost is that it has a valet mode that can be activated when you surrender your vehicle to valet parking or for servicing. This will disable the immobiliser CAN for 30 mph and allow you to drive just as normal by using your key fob. When the vehicle is parked up again the Ghost will return to full functionality.
Car Theft Solutions is the place to go for information more about Ghost, or if you want it installed in your vehicle. We are a family-owned business with more than 10 years of experience in vehicle security. This includes the
Ghost immobiliser installation. We are an approved installer for Ghost products and our name is built on customer satisfaction.
No cloning or hacking
The Autowatch Ghost immobiliser is one of the most advanced immobilisers available. It protects your vehicle from hacking and key cloning which makes it almost impossible to steal. The only way to steal your car is to physically tow it away. Even then, they wouldn't be able to start the engine.
This is because unlike other immobilisers that only stop your car from starting if they don't have your fob, this clever system actually disconnects the engine control unit so that the vehicle cannot be started. The system transmits an alert via buttons on the steering wheel, door panel, or centre console. It can only be removed with the proper pin code configuration.
Its sleek and subtle design allows it to be seamlessly into your vehicle without the requirement for additional keys or LED indicators. It operates independently of your factory alarm or tracker. It also functions as a CAN bus immobiliser, which means it is part of your vehicle's control area network and doesn't interfere with any existing devices like your vehicle's key fob or alarm.
This unique technology isn't easily detected by thieves, unlike other systems that use codes and RF scanning. It simply sends a series of pin codes that are silently transmitted through the buttons on your vehicle's steering wheels or door panels, or central console. The Ghost is a revolutionary device that protects your vehicle against keyless entry and smart key theft by generating an individual, unique pin code which must be entered to deactivate it.
With the increase in keys-less entry vehicles on the road, thieves are becoming increasingly sophisticated and using cloning equipment that can be purchased on the internet or in the classifieds for
ghost immobiliser less than PS15. They can then use the cloned fob to gain access to your vehicle. The standard immobiliser can only stop the car from starting if the thief has the original key fob. This isn't enough security, and it's easy to get criminals to jam or spoof signals to unlock the vehicle.
Valet mode
Standard immobilisers installed to your car use an electronic chip that sends signals. The system will then search for the code transmitted by the key to start the car. If the correct signal cannot be received the system will cut off the power and prevent the car from beginning. This is the basis of all immobilisers for cars that are aftermarket. It is a vital measure to safeguard your car from being stolen, even if someone has your keys or a device that could boost the signal of your key fob.
Ghost immobilisers do more than just stop this. The system, which is located on the CAN Bus of your Mercedes has been programmed with an unique PIN code that needs to be entered to start the vehicle. It is then secured in your application, and no anyone else will be able to access it without the same pin that you have.
The system will also prevent cloning, hacking and signal jamming (which can be used by thieves to bypass the immobiliser in your vehicle). If a thief gets their hands on your car keys or key fob, they won't be able to start your vehicle even if it's in a nearby parking lot. They may only be able to steal your car onto the flatbed truck, which is highly unlikely.
Valet mode comes as an option with your ghost immobiliser. When it is activated, the glove box and trunk of your vehicle will be locked. This means that anyone who tries to steal your car won't have anything valuable to take. It also limits the speed of your Tesla so that it is not able to be driven over 70mph. It will also disable insane modes. It will also lock your driver profiles and hide your home / work addresses so that nobody else has access to your private data on your Tesla dashboard.
If you want to use your vehicle for valet parking, or service, choose the 'Valet/Service' mode on your dashboard app. Enter your 4-digit valet code on the touchscreen. Once you have done this the alarm functions will be disabled however it will block the ability to start your car unless a valid pin is entered. This is ideal for people who have to hand over their car to others such as taxi drivers and garage mechanics.
The world's first aftermarket immobiliser for CAN buses
The Autowatch Ghost is the world's first aftermarket CAN bus immobiliser. It offers security that is unparalleled by any other product available today. It safeguards you from key hacking or cloning, and even theft of keys. This is done through the vehicle's current interface. It does not use additional remotes or fobs, but instead integrates into the vehicle's CAN data network. This makes it a "stealth device.
The device is an invisible circuit board that connects to your car's engine management system (ECU) and functions in a non-silent manner. Once activated, it will stop the car from starting until the PIN is entered. This is the unique number you receive when you request an installation. This number is required to enable valet, deactivate the alarm, or allow you drive away in a vehicle belonging to a family member (if they also have Ghost installed).
It is designed in a way that it cannot be detected by anyone who is looking into your cars interior, does not send any radio signals and will only be heard when it's being activated. It can be installed in a variety of places, making it virtually impossible to detect. It is also a low-maintenance device and can be used in conjunction with other systems such as a tracker (Brand dependent) to provide an all-inclusive anti-theft solution.