Ghost Immobiliser Installation
Add a ghost immobiliser your vehicle to protect it from thieves. Our TASSA-verified system protects against hacking, key cloning, and bypassing the vehicle immobiliser.
The system is hidden inside the wiring loom of your vehicle which makes it completely inaccessible to anyone looking. It works by creating an e-pin code push sequence by using buttons already present on the steering wheel doors, door cards, and the central console.
No circuit cuts
It's not surprising that owners are concerned about protecting the vehicle they've worked so hard to buy. However, traditional security devices such as wheel locks and alarms can easily be snatched away or taken over by thieves. Ghost immobilisers are a very effective and efficient solution that operates in silence and isn't recognized by modern day thieves.
A ghost immobiliser is a hidden device that connects to your vehicle's CAN data network to disable the engine without the use of radio frequencies or key fobs. It communicates with your vehicle's ECU through existing buttons on the steering wheel, dash and door panels to create an unique pin code that only you can access. The code can be changed at any point and can be as long as 20 digits long depending on what you prefer. It also comes with a secure emergency code you can use should you forget your PIN.
The ghost immobiliser is helpful to prevent a relay box in your home from transferring the signal of your car key, which would unlock the doors and start your vehicle. It could also block the latest high-tech methods of stealing your vehicle, such as OBD port hacking. The device is small, weatherproof and hard to see. It's also very difficult to tamper.
Another benefit of the ghost immobiliser is that it can be installed inside your car without permanent marks. It's ideal for those who are planning to sell their car in the near future. It's also a lot more efficient and less time-consuming to install than the factory-installed system.
The Autowatch Ghost, a cutting-edge new-generation device, prevents thefts of cars using contactless technology by connecting to a vehicle's CAN network and using the buttons to generate an unique PIN code. It is a devious system that can be put in place without removing wires and does not require any additional key fobs. It is also connected to the original ECU of the vehicle, which prevents thieves from by stealing it using a new key. This system has been verified by TASSA and can be linked with an International Security Register. Owners will be able to rest easy, knowing that their vehicle is protected from theft.
No scanning by RF
You'll want to safeguard your vehicle from theft if you have spent an enormous amount of money and spent a lot of time customizing it. One of the best ways to accomplish this is to install an immobiliser, which will stop your engine from running until you enter a unique PIN code. Using the buttons on your steering wheel as well as the dashboard, you can generate a PIN up to 20 digits in length that is only known by you, and ensure that only you can drive your vehicle. You can also set up a valet and service mode that will allow you to temporarily start your vehicle without entering the PIN code. This will permit the technician to work on your vehicle without you being present. This is a great feature for those who want to save time and make their life easier.
Ghost 2 immobiliser immobilisers, a new generation device, connects to the CAN data network of your vehicle. It uses the buttons located on the dashboard and the steering wheel to set a PIN number. It is designed to be discrete, with no indicators or sounds to give it away, and can be fitted anywhere on the vehicle, without disturbing the aesthetics of your beloved vehicle.
This stealthy device has been approved by TASSA and can reduce the cost of insurance. It also comes with an ability to track your vehicle, which can locate your vehicle even if it's been stolen. This is useful if you have a costly or rare vehicle that you've spent many hours personalising.
The Autowatch Ghost can be used together with an iPhone app to enable you to start your car remotely in the event you have forgotten your PIN or are not able to enter the vehicle due to a reason. This feature is great for those who need to collect your kids or run errands but don't want someone else driving your vehicle. It's also useful if you need to take your vehicle in for servicing or repair.
The
ghost immobiliser cost is unique in that it does not transmit or detect radio frequencies and is therefore undetectable by thieves who use RF scanning and code grabbing technology. It can also safeguard your car from key cloning and ECU swapping, which are the most common methods used to steal cars.
There is no key to cloning
Ghost immobilisers can be a great way to protect high-end cars and prevent key copying. They prevent your car from starting until an additional PIN code is entered along with the standard key fob. This makes it very difficult for thieves to rob your vehicle, and may discourage them from attempting it initially. This is a great idea if your vehicle has been extensively customized or if it is a rare model.
These immobilisers are connected to the vehicle's onboard CAN network and are completely hidden meaning there is no indication of its presence in the vehicle. It is also impossible for a burglar to identify the device using radio frequency scanning or code technology for grabbing. This means that a burglar would need to take longer to take your vehicle.
A criminal must be aware of the pin code and the location of the ghost in order to avoid it. But, the pin code will be specific to you and can be changed as many times as you want. The pin code is simple to remember, but mathematically impossible for anyone else to figure out. In addition,
autowatch ghost Immobiliser fitting the engineer will provide you with an emergency pin code override in case you ever forget the pin.
The Ghost CAN bus immobiliser is weatherproof, and can be installed in any part of your vehicle. It is compatible with any vehicle and can be completely customized to match your car's look. It is also simple to use and cost-effective. The device can be moved to a different vehicle, if it is compatible with the new vehicle.
The immobiliser for the CAN bus is compatible with a variety of other security features. For instance, it can detect damage to your vehicle and notify the owner. It will also shut off the engine in the event that the car is being manipulated. The system also protects your vehicle from key cloning and hacking. It also detects vibrations and contact with the vehicle. It can also notify the owner if the vehicle is moving.
No OBD port hacking
Ghost employs an immobiliser hidden in the module that is connected to the CAN data network of your vehicle that prevents thieves from hacking into your car to disable the alarm, turn off the key fob, and then code new keys. This technology is an enormous improvement over the traditional methods used by thieves in the past to steal your car. The CAN data networks means that your system will not be affected if you disconnect or change your battery.
The
autowatch ghost immobiliser fitting Ghost, the first non-detectable CAN bus immobiliser aftermarket in the world, protects against key-cloning, hacking, and replica car theft. It works without LED indications or key fobs, instead leveraging the buttons in your steering wheel or centre console, as well as the door panels to let you create a unique PIN sequence (up to 20 button presses) that must be entered prior to when you can drive your car away.
Modern thieves can use diagnostics to detect circuit breaks on your vehicle. They can bypass immobilisers that require a lot wiring or are integrated into the wiring. The Ghost is weatherproof and doesn't require any additional wiring.
