Why You Need a Ghost 2 Immobiliser Fitting Near Me
Modern thieves can rob a car in less than a minute. They use the OBD port of the vehicle to hack into the ECU and then duplicate keys and all with a laptop that is hidden inside the vehicle.
An Autowatch Ghost immobiliser blocks this by sending a series of pin codes via the buttons that are already in your vehicle (steering wheel and central console). It is completely inaccessible to anyone else in your car.
No key fobs or LED indicators, or any other ways to locate the vehicle are in place.
If you're looking for a way to stop keyless entry theft or key cloning, then look no further than the ghost immobiliser. This device is designed to protect your vehicle from these kinds of attacks by blocking the engine after a valid pin code is entered. This is a reliable way to protect your car. Insurance companies for cars consider it a security feature that could lower the cost of insurance.
The way the
ghost immobiliser fitting works is by connecting to your vehicles CAN data network. Once installed by us at Car Theft Solutions it will only begin when you press the exact sequence of buttons using your personalised override code. This means that any attempt to start the vehicle without entering this code will be greeted by a loud siren and the engine will not start. The thief then realizes that they've been caught and will likely abandon the vehicle.
This system has the benefit of not transmitting any signals, like a tracker. Thieves aren't able to make use of RF receivers to pinpoint your
ghost ii immobiliser device's location. It also doesn't emit any IR (infrared) signals, like the standard remote control key fobs or tracker do, which makes it difficult to deceive or hack.
The Ghost also comes with valet-mode which can be activated if you are giving your vehicle to a valet for parking or service. This will disable the immobiliser CAN for 30mph and allow you to drive in normal fashion with your key fob. The Ghost will function fully when the vehicle is parked again.
Car Theft Solutions is the place to contact for information more about Ghost, or in the event that you would like to install it in your vehicle. We are a family-owned business with more than 10 years of experience in security for vehicles. This includes the
Ghost immobiliser installation. We are an approved installer for
Ghost Immobiliser Installation Ghost products and our reputation is built on customer satisfaction.
No hacking or cloning
The Autowatch Ghost immobiliser is one of the most advanced models on the market. It safeguards your vehicle from key cloning and hacking and makes it virtually impossible to take. The only way a thief could steal your vehicle is physically towing it away & even then they won't be able to start the engine.
This is due to the fact that unlike other immobilisers which only stop the vehicle from starting if they don't have your fob this system actually shuts off the engine control unit, ensuring that the vehicle cannot be started. It does this by sending a signal to buttons on your steering wheel and door panel, as well as your centre console that can only be disarmed by entering the proper pin code configuration It is this feature that makes the Ghost impossible to break.
Its sleek and subtle design allows it to seamlessly into your vehicle without the necessity of additional keys or LED indicators. It functions independently of your factory tracker or alarm. It also functions as a bus immobiliser, which means it sits within your vehicle's control area network and is not interfering with any existing devices like your vehicle's key fob or
Ghost immobiliser installation alarm.
Unlike other systems that rely on RF scanning or code grabbing, this unique technology is undetectable to thieves since it sends an inaudible sequence of pin codes through the buttons that are already present on your vehicle's steering wheel, door panels or central console. The Ghost is a revolutionary device that protects your vehicle from keyless entry and smart key theft. It does this by creating a unique, personalised pin code that needs to be entered to disarm it.
With the increasing number of keyless entry cars that are on the road The thieves are becoming sophisticated and using cloning equipment that can be purchased via classifieds or online for less than PS15. They can then use this cloned fob to gain access to your vehicle. A standard vehicle immobiliser stops the engine from starting when you have your original key fob. This does not provide enough protection and it is easy for criminals to alter or jam signals to unlock the vehicle.
Valet mode
An immobiliser that is standard on your vehicle has an electronic chip that transmits a signal when you press your key fob button. The system will then look for the particular code you have that is sent by the key to start the car. If the proper signal isn't received, the system will cut off and stop the engine from getting started. This is the principle behind all immobilisers for cars that are aftermarket. It is a vital measure to safeguard your car from being stolen, even if a person has your keys or an accessory that can boost the signal of your key fob.
However, a ghost immobiliser does not only stop that, it goes much further. The system, which is located on the CAN bus of your Mercedes, is programmed with a unique pin code that has to be entered in order to start the vehicle. The sequence is then encrypted in your app, and no one else can access it without the same pin as you.
The system also stops hacking, cloning and signal jamming (which could be used by thieves to bypass the immobiliser on your vehicle). If a burglar gets their hands on your car keys or key fob, they won't be able to start your car even if it's located nearby. They may only be able to steal your car on a flatbed truck and that's highly unlikely.
Valet mode is an option with your ghost immobiliser. When it is activated the glove box as well as trunk of your car will be locked. This means that anyone trying to take your car away will not have anything valuable to take. It will also limit the speed of your Tesla so that it is unable to be driven over 70mph, and it will also disable the ridiculous mode. It will also lock your driver profiles and hide your home or work addresses so that no one else has access to your personal data on your Tesla dashboard.
If you would like to use your vehicle for valet parking or service, select the 'Valet/Service' mode on your dashboard app. Enter your 4-digit valet code on the touchscreen. The alarm will no longer work, however the car won't start until you have entered a valid pin. This is a great option for those who need to give their vehicle to other people, such as garage mechanics and taxi drivers.
The first-ever aftermarket immobiliser for the CAN bus
The Autowatch Ghost is the world's first aftermarket CAN bus immobiliser and offers security that is unparalleled by anything available today. It safeguards your vehicle from key cloning, hacking and even key theft. It does this through the vehicle's current interface. It does not require additional remotes or fobs, but instead integrates into the vehicle's CAN data network. This makes it a "stealth device.
The device is a circuit board hidden in your car's engine control unit (ECU). It works quietly. Once activated, it will stop the car from starting unless a PIN is entered. This is a specific number you will receive when you book an installation. This number will be required to enable valet mode, disable the alarm, or permit you to leave in the car of your friend (if they have a Ghost installed too).
It is designed to blend in from the interior of your car. It does not emit radio signals, and only produces sounds when it is activated. It can be placed in a variety of places, making it nearly impossible to spot.