In Wall Fireplace - How to Choose the Right Height and Depth for Your Fireplace
An in-wall
fireplace on wall gives an elegant and polished appearance without the expense of mantles. It is one of the most simple electric fireplaces to set up.
However, there are several aspects to take into consideration prior to purchasing your in wall fireplace. Follow these suggestions to get the most of your purchase.
Height
Although it might seem like a simple question but determining the height of your new fireplace is among the most important decisions you make. This is because the height of your fireplace will affect everything from how well it will fit in a room to how easily it can be seen. The fireplace may appear odd in the event that it is set too high. It could also detract from its beauty. A fireplace that is too low could be lost within the wall space.
Electric fireplaces can be erected at different levels. The majority of people install their fireplaces from a sitting position at eye level. This requires a height between 40-42 inches. Some people put their fireplaces under their TVs. This is an attractive alternative.
The height of your fireplace will be determined by several factors, including the size of the room and the length of the wall where you'd like to place it. The bigger the room is, the bigger it will be. This could mean you are capable of fitting a larger fireplace in it. The length of a wall is also crucial since a wall that is larger can accommodate a bigger fireplace.
The way you intend to make use of your fireplace is an important aspect. If you plan to use it for decorative purposes, a lower level will work better. If you want to use it to heat your home, you will need to ensure that the fireplace is tall and sturdy enough to meet the safety standards.
It is essential to choose the right height for your fireplace, so that it is in line with your decor and be simple to clean or fill. If you're not sure of the size to choose it is always a good idea to reach out to an expert fireplace installer for help. They can suggest the best height for your fireplace, in accordance with their expertise and your home's layout.
Depth
The depth of a fireplace is crucial to know if you plan to install it in a recessed location. If you are planning to cut into the wall, ensure that you have enough room to accommodate your fireplace's interior design (the space for the smoke shelf above the firebox as well as the flue that extends upwards from the roof). You should also consider the space you'll have for
in wall fireplace the surround and whether you would like a mantle.
A lot of the most recent electric fireplace models have an incredibly deep depth that is concealed, giving them an "integrated" look. This kind of wall fireplace that is electric is best exemplified by the Panorama BI Deep series. This model features a 5.8-inch depth that lets the user see the flames and the ember bed, not the frame of the fireplace. The media package includes driftwood logs with natural colors white pebbles, or clear glass crystals that add a luster to the embers and reflect the flames.
wall-mounted fireplace gas fireplaces are available in both shallow and deep models. But, when deciding the depth of your fireplace it is essential to keep in mind that these units operate as a supplemental heat source and should be properly vented by a skilled professional. The length of the vent pipe, the dimensions of the flue and the distance from the stove to the vent are all factors that should be considered when determining the depth of a fireplace made of gas.
It is essential to read and follow the instructions of the manufacturer when installing your fireplace. A professional installer is recommended in the majority of cases. It is also an excellent idea to have a second person in the house to install a fireplace.
The addition of a fireplace in the wall space to your home is an excellent way to add value to it and create ambiance. It also can reduce your heating costs. Additionally, it's an ideal option if cannot install an old-fashioned fireplace into your home due to space constraints or due to the location of your existing chimney.
Surface Mount
Surface mounts are an excellent alternative if you don't want to or aren't able to cut into the wall to mount an electric fireplace. They also give it a sleek built-in appearance. Some models, such as the Allusion line, can even be mounted partially recessed in the wall without compromising on the heat output or aesthetics.
To begin the installation, mark the wall with a pencil where the bracket will be placed. Use a stud-finder for locating the studs and then place the brackets in front of at least one stud for stability. If a stud cannot be reached or is not suitable for your fireplace, you could make use of drywall anchors for support.
After you have marked the location of mounting brackets on the wall using a power drill, you can use it to screw them in, making sure they are in alignment with the studs. You can use studs or plastic anchors to connect each bracket. Once the mounting brackets are in place, raise your fireplace and place it on the wall bracket. After it's secured, you can check the position of your fireplace to ensure that it's straight and not crooked in the opening.
Before you begin the installation, plug your fireplace in and make sure that all functions function properly. Light the fire, play around with the flames, the heat, lights for the ember bed and the list goes on. When you're satisfied with your results you can now install your floating mantel.
Based on the model of your fireplace, you'll require a wire connection to the appliance wire connector on the mantel's bottom or in the event that your fireplace has hooks or slots on the back connecting them to slots on the wall mounting brackets. After you've completed this then, refer to the owner's manual for specific instructions on removing the front glass panel and inserting it inside the opening.
If you need to adjust the height you can replace the glass front once you have removed the front panel. If your fireplace comes with ember bed media, spread it out across the top of the grate to give it a an appearance that is more natural and then secure it using the screws included.
Plug-In
In contrast to traditional fireplaces that burn wood, these electric versions don't need vents or chimneys. They're plugged into a standard outlet and provide additional heating for rooms that are that are up 400 square feet in size. They also come with a variety of temperature and flame settings so that you can alter the ambience. Some models have LED lighting effects that highlight the flame and embers. Some models have the top grille grate which hides manual controls but easily can be opened to reveal buttons to set the desired setting.
Electric fire places with plug-ins can be installed directly on the wall or recessed to create an appearance of a built-in. They are generally easier to set up than a mantel fireplace. Some models come with a pedestal to allow you to put the fireplace on flat surfaces, such as a buffet or dresser. Included are an remote control, mounting hardware and log set. Depending on the model, electric fireplaces may include both heat and flame options that can be switched off for year-round ambiance.
Certain models come with adjustable privacy glass that can change instantly from fully transparent to partially. This makes these models popular for walls that divide common entertainment spaces like living and dining areas. These models can be utilized in bedrooms, where fireplaces is a cost-effective method to warm up a space and ensure privacy.