How to Replace a UPVC Window Handle
If your window handle made of upvc is broken, don't panic. Replacing a window handle made of upvc is a fairly simple job and can be accomplished in just a few steps.
It doesn't matter if you have an in-line or a cranked window handle, they all have an elongated spindle that extends from the back plate. This spindle is then placed into the locking device.
Identify the type and size of the lock and handle
Over time, window handles or locks can be damaged and lose their function. The good thing is that this can often be repaired without replacing the entire window unit made of uPVC. The first thing to do is to identify the kind and size of your handle and lock. This will help you identify the replacement parts that you need.
Identifying the kind of handle can be identified by looking at the base of the handle. There is the screw or pin that is holding the handle to its base. If the screw is missing it could be an indication that the handle has split from the base. If the handle is broken internally and isn't able to hold the spindle any longer It could also be a sign that the handle needs to be replaced.
There are a number of different types of uPVC window handles The most well-known is the Espag handle. They are typically fixed using two bolts and the spindle is connected to the locking mechanism of the frame of the window. These handles are typically used on uPVC tilt and turn windows.
Cockspur handles are a different kind of uPVC handle. They are similar to the Espag handles, however they have a lower projection from the frame. These handles are typically used on older uPVC windows.
Venetian window handles are another alternative. They are similar to Espag handles, but they have a flat bottom that allows them to be positioned flush with the frame. These handles are a good option for homeowners who want a stylish handle that will be a perfect match with their uPVC frames. They are available in a variety of colours that can match any design.
Take a measurement of the spindle
It is crucial to be aware of how the handle is installed before you can order an replacement. This will help determine whether it's tight enough or too loose and if it will fit inside the window frame. You can do this by identifying the kind of handle you own and determining the length of the spindle. The spindle is the steel shaft that connects the handle to the lock inside the window frame. The spindle comes in various sizes. The current industry standard is 8mm. Older handles may have a 9mm cross-section therefore it's essential to measure the old one to ensure you get the right size replacement.
There are several types of window handles. However, the most common are inline Espagnolette and cockspur handles. These handles operate a locking system in the window. They use shootbolt rods to lock the window replacements (
This Internet page) once it is closed. Depending on the type of handle they are secured in place with pins or screws.
You can buy Upvc handles that are replacement on the internet or in many DIY stores. They are available in a variety of finishes, and are suitable for windows that are new or replacement. They can also be key-locking or non-locking for extra security.
To take off your old handle, open the door and loosen the screws that hold it in place. Store the screws in a container to protect them from damage. Once the screws have been removed, gently pull out the handle and measure from the base to the tip of the spindle. This will provide you with the information necessary to purchase the right replacement. The spindle of the handle is the shaft made of metal that connects it to the lock gearbox in the window frame.
Remove the handle that was previously used
Changing the uPVC window handle is a straightforward job that usually will take less than five minutes with the appropriate tools. The first step is to determine the kind of lock and handle, which will help you identify the right replacement. After that, weighing the spindle will make sure that the new handle is a good for the job. In the end, you'll need remove the handle you have been using and replace it with the new one.
The majority of uPVC handles are inline Espagnolette handles, which are equipped with an integral spindle that slots into the window's locking mechanism. They are typically easy to remove but might require force if become stuck. There are usually two screws that hold the handle in place which can be removed with the help of pliers or a screwdriver. You may also need to remove pins based on the kind of handle.
After removing the screws, you can then remove the old handle. The top of the base plate will be visible once the handle is in the open position, showing two more screws that you can unscrew. If the sticker is on, you will need to take it off.
With the screws that came off the handle, you can put the new handle in the appropriate position. Make sure that the handle is in the unlocked or open position, and
Window replacements then align the screw holes with those on the window. After this is done you can put on the screw caps and test the new handle to ensure that it works correctly. The
replacement window glass of a uPVC window could be a quick and simple task, but you need to take the time to complete it in a proper manner.
Install the new handle
If you've managed to remove the existing handle from the frame, it's time to put in the new handle. Start by locating and removing the screws with your screwdriver. Once the screw covers are removed, place them in a secure location before proceeding to the next step.
Then screw the spindle into by aligning it with the hole that is already in place. Make sure that you align the holes in the handle with holes in the window frame and make use of a screw identical to the ones previously used, or it could result in the handle not being secure.
uPVC Espag handles come with a square 7mm spindle that turns the lock mechanism installed to the window. This kind of handle can be commonly found in modern uPVC windows. uPVC Cockspur (also called by the name Cotswold) handles feature an extended, curved nose that is secured to the outer frame or cross member of the transom bar. They are often found on older uPVC Windows.
It's important to lock and unlock the window numerous times after the handle is installed. If all goes according to plan, the new uPVC handle should be securely fixed and operating smoothly. If you encounter any issues this guideline will help you identify the issue and fix it swiftly. Bridgewater Glass can help you in the event of problems with your uPVC handles or any other glazed home improvements. Our glaziers can repair or replace various window handles and frames. This makes us an excellent option for
double glazing replacement window-glazing.
Test the new handle
In time and with regular use the uPVC locks and handles may be damaged and wear and wear and. It can make them less secure and less effective and
window replacements therefore it is essential to replace them as soon as you can. It's also recommended to do this when you upgrade your windows, as changing the handle and lock will maintain the integrity of the windows you have just bought.
When it is about uPVC window handles, there are a number of different styles. Some are secured with screws or pins, while others have blades that slot into the lock mechanism. Each type has a distinct way to replace it, so you have to know which one you own.
Espag window handles are the most well-known kind, and are typically found on newer uPVC windows. They have a spindle that extends from the handle and into the lock gearbox and when you open the windows, it triggers the locking mechanism. They are also simple to remove. However, it is important to be careful not to harm either the mechanism or handle.
Cockspur handles are another alternative to uPVC window handles.
