Ghost Immobiliser Installation
Protect your pride & joy from car thieves by putting in a ghost immobiliser. Our TASSA verified system protects vehicles from hacking, key cloning and immobiliser bypassing.
The system is hidden within the wiring loom of your vehicle and is inaccessible to anyone who is looking. It operates by creating pin code push sequences through existing buttons on the steering wheel, door cards and the centre console.
No circuit cuts
It's not surprising that owners are concerned about protecting the car they've worked so hard to buy. But, traditional security systems like wheel locks and alarms can easily be snatched away or bypassed by thieves. A ghost immobiliser however is a very effective solution that is silent and cannot be recognized by modern day thieves.
A ghost immobiliser, also known as a hidden device is a device that connects to your vehicle's data network CAN to turn off the engine. It does this without the use of radio frequencies or key fobs. It communicates with the ECU of your vehicle via buttons on the dash, steering wheel and door panels. This creates an individual pincode that is only available to you. The code can be altered at any time and can include up to 20 numbers based on your preferences. It also comes with an emergency code that you can use in the event of forgetting your PIN.
The ghost immobiliser could also be used to stop relay boxes from transmitting the signal of your car's key from inside your home, which will unlock the doors and then start the vehicle. It can also block high-tech methods to steal your vehicle, like OBD port hacking. The device is small and weatherproof, so it's difficult to see and even harder to tamper with.
The ghost immobiliser has another benefit: it can be inserted into your vehicle without leaving permanent marks. It is ideal for those who plan to sell their car in the near future. It's also more efficient and less time-consuming to install than the factory-installed system.
The
autowatch ghost immobiliser fitting Ghost, a revolutionary new-generation device, prevents thefts of cars using contactless technology by connecting to a vehicle's CAN network and using the existing buttons to generate a unique PIN code. This is a stealthy device that can be installed with no wires cut and doesn't require any additional key fobs. It also connects to the vehicle's original ECU, preventing thieves from gaining access to it using an additional key or replacing the ECU with an "relay". This system is TASSA verified and can be linked to an International Security Register, allowing owners to have peace of mind knowing their vehicles are protected against theft.
No scanning with RF
You will want to protect your vehicle from theft if you have spent lots of money and spent a lot of time customizing it. Installing an immobiliser is among the most effective ways to avoid theft. It will prevent your vehicle from starting until you enter a unique code. You can generate a 20-digit code using the buttons on your dashboard or the steering wheel. This will ensure that only you have the right to drive your vehicle. You can also create a valet and service mode that allows you to temporarily start your car without having to enter the PIN code. This will permit the technician to work on your vehicle without you being present. This is a great option for those who wish to reduce time and make their lives easier.
A ghost immobiliser is a next-generation device that connects to your vehicle's CAN data network, and uses the buttons on the dashboard and steering wheel to program a unique PIN code. It is designed to blend in, as it does not emit any noise or LED indicators. It can be installed anywhere on your vehicle, without impacting the appearance of your vehicle.
This stealthy gadget has been approved by TASSA and could lower your insurance costs. It also comes with a tracking function that can track your vehicle even if it has been stolen. This is helpful if you have a costly or rare vehicle that you've spent a lot of time in customizing.
The
autowatch ghost immobiliser Ghost can be used in conjunction with an iPhone application that allows you to remotely start your vehicle in the event that you have forgotten your PIN or are not able to enter the vehicle due to some reason. This feature is perfect if you need to pick up the kids or run errands but don't want to risk someone else driving your vehicle. This feature is useful in the event that you need to bring your car to a mechanic to be repaired or serviced.
Another advantage of the Ghost is that it does not transmit or detect radio frequency signals, making it unnoticeable to thieves who employ RF scanning or code grabbing technology. It also has the ability to safeguard your car from key cloning and ECU swapping which are the most the most common methods used to steal cars.
There is no key to cloning
Ghost immobilisers can be a great way to protect expensive cars and stop key copying. They stop your car from being started unless a PIN code is entered along with the regular key fob. This makes it more difficult for thieves to steal the vehicle, and may even discourage them from trying. This is an especially good idea if you've spent an enormous amount of time and money in personalising your vehicle or own a unique or expensive model.
These immobilisers are connected to the vehicle's CAN data network and are completely hidden, which means that their presence is not obvious. It is also impossible for a burglar to identify the device using radio frequency scanning or code technology for grabbing. This means that a thief will have to spend longer in order to take your vehicle.
To get around the system, a thief must be aware of the pin code and the location of the Ghost. The pin code is unique to you and you can alter it as many times as you want. The pin code is simple to remember, but mathematically impossible for anyone else to understand. The engineer will also provide an emergency pin code in case you forget your pin.
The Ghost CAN Bus immobiliser could be installed in a matter of minutes on your vehicle. It can be used with all vehicles and can be fully customized to match your vehicle's look. It is also extremely affordable and simple to use. You can even transfer the device to a different vehicle if you decide to change cars during the lifetime of ownership, provided that the new vehicle is compatible with it.
The CAN bus can be used with other security features. It could, for instance,
autowatch ghost Immobiliser fitting detect damage to the vehicle and notify the owner. It will also shut off the engine if it senses that the car has been damaged. The system can also protect your vehicle from key cloning and hacking. It can also detect vibrations and contact with the vehicle. It can also notify the owner if the vehicle is moved.
No OBD port hacking
Ghost is a hidden device that is connected to the CAN data network of your vehicle. This prevents a thief hacking in to disable your alarm, disable your key fob, or create new keys. This technology is an enormous improvement over the methods that have been employed by thieves in the past to steal your vehicle. The CAN data network ensures that the system won't be affected by disconnecting or replacing the battery.
The Autowatch Ghost is the first immobiliser for CAN bus aftermarkets in the world, protects against key-cloning, hacking, and replica car theft. It works without LED indications or key fobs, instead using the buttons on your steering wheel or centre console, as well as the door panels to allow you to create a unique PIN code sequence (up to 20 button presses) which must be entered before you can drive your car away.
Modern thieves employ diagnostics to detect cuts in the circuit on your vehicle and can bypass immobilisers that require a lot of wiring or are built into the wiring.