Add Warmth to Your Home With a Fireplace Wall Mount
Create ambiance and warmth in your home, office or commercial space by installing a fireplace wall mount. These wall mounts are typically easy to set up and include mounting brackets to hang or recessing into walls.
Follow the steps on the site of the manufacturer to make a simple, quick installation. Verify that the fireplace's bottom and the wall-mounting brackets fit together. Then, secure the fireplace to the wall.
Size
A wall mounted
electric fireplace can be a focal point in an area that provides warmth and ambiance. They are available in a variety of sizes that can be adjusted to suit any space. A smaller model is ideal for bedrooms while a larger one could be used in a family room or living room. Certain models have the option of recessed installation against the wall to create an elegant appearance.
The height of a fireplace wall mount can influence the way it appears within a room. A lot of people put them higher up on the wall to create a dramatic impact. They are usually six to 12 inches above the floor. Some prefer to place the TVs at a standard height of 4.5-5 feet. This allows them to be seen by all people sitting in the room.
No matter what size you choose, it is important to remember certain elements to ensure that your fireplace is safe and efficient. Keep all combustibles at least three feet away from the fireplace, including furniture, drapes and other things. If possible, you should also attach the mounting brackets to studs. If you can't find studs, you must use anchors made of plastic to ensure your fireplace will not be removed.
When choosing a fireplace mount, it's important to take into consideration the amount of heat it produces. As a rule, choose a model which produces approximately the same amount of heat as an ordinary electric heater. By following this rule of thumb you can be certain that your new fireplace will be able to provide enough additional heating for the entire space.
Some fireplaces have specific features that make them stand out from the competition. For example, some offer remote control operation and adjustable brightness settings and no-heat settings. They also have cool-to touch glass and realistic LED flames. Other notable features include a convenient built-in shelf for holding electronics, and a simple installation process that doesn't require any expert assistance.
Installation
Unlike a built-in electric fire that requires a hard-wired connection to the electrical system of your home, fireplace wall mounts are semi-permanent. It can be erected straight onto a wall or placed into a bracket that in turn is fixed to the wall. It is important to choose the location close enough to an electrical outlet to allow the power cord to reach, while providing sufficient clearance to nearby objects, in accordance with what the manufacturer recommends in your owner's manual.
Before starting the installation process, ensure that your fireplace is in good condition by plugging it into and playing with its LED lights and the heat settings. This will let you know whether it is ready for installation or if it requires to be checked further.
The next step is to prepare the space where you intend to install your fireplace wall mount. Based on the model, you may require a bump-out on the wall. You may also want to cover the wall in drywall. In the latter scenario it is recommended to use drywall methods like tape and mudding. Let it completely dry before proceeding.
After the walls have been prepared, secure the bracket to the wall with screws. It is recommended that they be fixed into the studs behind the drywall. This will stop the fireplace from slipping away from the wall later.
After the bracket has been fixed, it's time to mount the fireplace. The style of fireplace will vary, but there will usually be a ledge where the fireplace sits and a spot to attach it to brackets on top. You can then add additional media, like logs or embers.
Some models allow you to connect the firebox and screen together on the wall bracket. This makes the installation even easier however it is essential to check that everything fits correctly and is tight before the final step.
Once the fireplace is set it is possible to complete the appearance by tacking or screwing the bracket to the wall, and then trimming any wires that aren't needed. You can also consider using paintable wire covers to disguise the power cord, if you want.
Safety
A fireplace wall mount lets you to warm your home and save valuable floor space. However, it is essential to take safety precautions when using this kind of fireplace. The first step is to ensure that the fireplace is grounded to prevent electric shock. Also, be sure to follow the manufacturer's instructions for proper use.
It is possible to buy wall-mounted electric fireplaces that do not generate heat, however most of them include an electric heater to increase the realistic nature of the flame effects. This is usually in the form of a fan-forced heating device that blows air through a heating element however, some models might have an infrared heater as well.
After the fireplace is mounted, it is important to avoid touching the hot surface. This could cause burns or damage to the device. To minimize the risk of fire keep combustibles at a minimum of three feet away from the fireplace. You should also be careful not to block the vents at the back of the fireplace.
There are additional safety features to look for when choosing an
electric fireplace wall mount. For instance, you must make sure that the unit has an emergency shut-off button to avoid fires and overheating. It is also an ideal idea to buy a model with a low temperature output, since it will help conserve energy.
The material of the surround is also important. Choose a material which is safe for pets and children, such as wood veneers, steel or glass. Additionally, you should select a model that has an LCD display or remote control to allow you to operate it easily.
There are a variety of wall-mounted fireplaces, including electric and ethanol. The one that is right for you will depend on your budget and the design of your home. You can be certain to bring warmth and
Electric Fireplace Wall class to your home, regardless of whether you opt for an electric or ethanol fireplace. However, you should always follow the safety guidelines provided by the manufacturer and remember to keep your family, friends and pets safe when using this fireplace.
Style
The style of the fireplace wall mount determines how it will look on your walls. Certain models are designed to stand out, and others blend in with the rest of your room's decor. For example, a modern model like the Streamlined wall-mount electric fireplace comes with a sleek front glass face and a minimalist design. It features top venting that allows heated air to flow smoothly, while maintaining the fireplace’s stylish design. Its flat mounting and easy-to use remote make it easy to operate.
There are also wall-mount electric fireplaces with mantels with a more traditional design. These units are ideal for homes with existing open hearths or those looking to convert a wood-burning firebox into an electric fireplace without a chimney. These flat-wall fire places come in different sizes and include a shelf to display decorations. They're a great option for living rooms, bedrooms, and even home offices.
Gas wall-mount fireplaces are also a excellent option for those looking to create a warm, warm and inviting ambience in their homes. These units come with a traditional log set and are available in several frame styles including natural and black. They also come with a customizable ember bed and LED flame colors for an individual touch.
