Repairs to uPVC Windows
uPVC windows are a fantastic choice for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they do not get rusty or decay.
It is essential to clean and oil UPVC windows and doors regularly. This will help prevent unnecessary repair costs and improve the efficiency of energy.
1. Broken Glass
If the glass in your window has been damaged, it can cause a great amount of damage to your home, making it very dangerous and potentially fatal. It is important to take the time to ensure that you're doing all you can to keep your windows in good repair.
Single-pane windows are relatively easy to replace, and they typically fit into old frames very easily. If you have double-paned windows which are held together by internal beading, it is harder to remove and replace the old panes. In this situation, it is necessary to purchase plastic spacers in order to aid in fitting the new pane into the window frame.
If you're planning to try to remove the glass panes yourself it is important to wear appropriate safety gear, including thick gloves and eye protection. It is also an excellent idea to lay down a drop cloth prior to when you begin working on the glass, so that any fragments of glass fall onto the cloth rather than on the floor where they can be trampled upon and cause further damage.
It's a great idea to seal the gap after the glass has been removed. This will stop drafts and water from getting into your property until a professional is able to fix the window. This also serves as an obstruction to prevent intruders from making their way into your home. If the gap is particularly large, you may think about an alarm door that comes with an integrated window as it offers the best of both worlds.
2. Sagging
uPVC is durable, energy-efficient and affordable alternative to timber sash window. However, over time, they can suffer from a variety of issues, including sagging. A sagging uPVC window could cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from becoming worse.
To repair a window that is sagging, you can try to reposition the hinges. You'll first need to open the windows to get at the frame. After that, using an screwdriver, take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after having relocated your hinges. If you are happy with the size of the window, you can tighten screws to secure them in the right position.
If you aren't able to move the hinges you may need to replace the seal. Rubber seals can dry out and lose their elasticity with time, which causes them to lose their tightness. It is crucial to replace your seal as quickly as you can in order to keep your uPVC window waterproof and draughtproof.
uPVC handles may also loosen up. Most often it is due to screws that have come loose over time. However, it can occur because the handle mechanism has been worn out. It's relatively easy to repair a loose
upvc window repairs near me handle. First, you'll need close the window and then perform an experiment fit. The joints at the corners of the sash must align with the joint on the casing. If it isn't, you can use a screwdriver to loosen the handle and then reverse the mechanism back into position.
3. Water Leaks
It is essential to take action if awake each day to find mouldy walls and wet floors. Leaks of water from windows can cause structural damage to your home and also impact your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.
It is a fairly easy fix that can be completed by any skilled DIYer. Depending on the severity of the issue the old caulking may need to be removed before a fresh layer can be applied. It is essential to keep in mind that when it comes to uPVC
window repairs, you should not be tempted to apply too much caulk' as this will only make the area harder to clean and could reduce the efficiency of your energy.
It is essential to ensure that the drainage holes are free of debris and that the sill pan has been angled correctly so that it drains away from the window. In more serious cases you might need to consider replacing the window.
Moldy sills and rotten ones are also signs of water leakage. This fungus thrives in damp conditions and can quickly spread throughout the house.
If the leakage occurs between the double-glazed window, it is more likely the problem is with the seal rather than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.
4. Faulty Hinges
If your uPVC windows are difficult to open, or loose and open with a breeze, it may be hinges that are at the fault. They can be easily repaired by any DIYer who is skilled and can be completed in a matter of minutes.
Like any mechanical part hinges are prone to be damaged over time. The process of replacing a hinge on a window is an easy process but it can be simpler with someone else to assist in holding the frame in place.
It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.
Faulty window hinges can be caused by incorrectly opening the window a certain manner or because of poor installation at the factory. This issue can be fixed by sending us a photograph via our website and we will be more than happy to give you advice.
Regular lubrication of the hinges is also necessary. Applying a light engineering lubricant to the hinges is a great way to do this. We recommend using an oil that does not contain solvents,
window repairs like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more smoothly. It can also lower the possibility of a window getting stuck and stop corrosion. It is recommended to do this once a year. WD40 and other solvent-based lubricants are not recommended as they can cause damage to your uPVC windows.
5. Draughts
Draughts can be caused by several different factors. First, the hinges because of wear and tear, could become misaligned. This can cause gaps to develop where the sash joins the frame. If they're beyond repair, it might be required to realign them. In addition, the interlock could also become disaligned. This is located on the hinge's side and might require to be cleaned. In some cases, it may be necessary to replace them.
The seals may wear out or be damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping is a good way to stop draughts. Replace the upvc windows with low-emissivity lenses. This will help regulate indoor temperatures and lessen the risk of draughts.
Lastly, one of the most effective ways to cut down on the draughts in your home is to use an draught excluder. These are typically fabric tubes that are filled with some kind of filler. They can be positioned on the windowsill on top. These will keep your home warm by blocking out cold air.
The windows made of upvc can keep providing excellent insulation and security to your home with regular maintenance and repairs. However, it is important to recognise that windows last for a certain period of time and they may reach an point at which it is more economical to replace them than repair them. If you encounter any issues with your upvc window you should consult an expert as soon as you can.