Replacement Handles For UPVC WindowsUPVC window handles are available in various styles, however they all have the same locking mechanism. To replace a uPVC handle first remove the top screw from the base of the window handle which will reveal two screws.
Then, take measurements of the spindle to make sure your new handle will fit. It's crucial to know the type of handle you have since there are numerous sizes.
Inline Espagnolette Handles
Most double-glazed windows come with Espagnolette handles that operate multi-point locks to increase security. They work by using the 7mm square spindle on the back of the handle which connects with a gearbox on the inside of the window frame that moves multi-locks when turned. They come in a variety including cranked, inline key locking and cockspur handles and they can also be provided as an entire set to replace one handle that is broken or worn out.
The uPVC handle replacement kits we provide are designed to make the process of replacing a damaged or broken window handle with a espagnolette easy. These uPVC handle sets are packaged with a range of spindle lengths to suit the majority of applications. They come with all the fixing screws required for installation included. These handles also come with key-plugs that permit them to be changed from traditional open/closed handles egress or fire escape non locking handles (if used with the correct key plug).
If you are just looking for an espagnolette handle that can simply replace your existing window handles without changing the position of the mushroom plates, we recommend our Simplefit Inline Espag Handle with 3 Spindles. These handles are designed specifically for this purpose and they come ready to fit with a range of spindle lengths already inserted so you don't need to worry about cutting them down on site. The handles are also a good choice for new build or refurbishment projects due to their excellent value and easy installation.
Another alternative is our Yale Sparta 2 Inline Espag Handle that has been designed to be minimally intrusive with a reduced base height. It is part of the suitable hardware range and comes in a variety of finishes that comply with the requirements of BS EN1670 : 2007 Grade 5. They have been tested for durability and are suitable for use in acidic woods and coastal environments. They also work with cylinder immobiliser inserts that allow you to achieve key-locking status where this is required.
Cockspur Handles
Often found often on older uPVC and aluminium windows, cockspur handles are a simple latch and catch arrangement. The handle's nose is connected to or placed into the catch, which is a wedge block of plastic mounted on the window frame. Because the wedges are available in various sizes, it is essential that you know what step height you need to buy prior to purchasing a new handle. As a general rule Upvc windows typically utilize a 21mm step and aluminum frames typically have a 9mm handle step.
The cockspur handle is lockable with a key, providing security to your home. The lock is fitted inside the handle using an appropriate spindle that fits in the hole in the handle (also known as a backset). The spindle has a 7mm square cross-section and is used to either open or close the window.
If you are replacing a handle for a cockspur, it is worth ensuring that it has the same height of step as the original. It is usually measured from the bottom of the spur on the handle to the underside of the nose of the handle. This measurement is often referred to as the stack height or backset and it is essential that you know this before you purchase a handle.
Cockspur handles are available as straight/universal, cranked or left- or right-handed versions. This permits the handles to be installed on left or right opening window and provides the operator with more ease of use.
It is crucial to determine whether or not your window needs a restrictor designed to prevent the handle from being opened beyond a certain point. They are typically required for high-rise apartments or commercial structures for safety reasons. The majority of domestic homes don't need these.
There are many different styles and colors of cockspur handles, including stainless steel and white uPVC steel. Choosing the best one for your windows will depend on your personal tastes and style, as well as how you want your window to perform.
Tilt and Turn Handles
The UK is home to a wide range of double-glazed windows with tilt and turn handles. Both timber and upvc ones feature these handles. The handle is generally positioned at 90 degrees, however it can also be turned at 180 degrees. This allows the window to be fully opened into the room, and it can be lowered to allow to allow for ventilation. The handle is locked in this position, and requires keys to unlock the handle when it is needed to open it.
This type of handle is easy to replace, with only one large handle instead of several smaller ones. This reduces the appearance of the handle and is more in line with contemporary minimalistic design trends. They are also much easier to clean since they are able to open inwards.
They are also up to 8 times stronger than casement window. This makes them perfect for larger windows and doors. The frames are made from steel core, which provides additional durability and
Replacement Handles For UPVC Windows strength.
The tilt and turn mechanism is more secure than a casement window, as the handle can be locked at any angle. This is particularly crucial in areas where children are present, as it prevents them from accidentally opening the window.
Tilt and turn windows are a common option for a lot of houses, since they can be used in many ways. They can be opened horizontally as a normal window or dropped down to a style of a hopper. This is a great choice for those who want to improve airflow inside their home. They can also help with noise reduction. They are also easy to clean and maintain since the
glass window replacement is removable. You can find these windows in a wide range of sizes and colours. These windows can be used in any home, and complement both traditional and modern styles.
Crank Handles
Crank handles require little effort to open and permit a stunning view of the outdoors without blocking the glass. They are typically used in casement windows, that hinge on the sides or windows with awnings. They feature a mechanism similar to windows, with a linkage arm that supports the window sash which opens or closes by turning the handle in the clockwise direction. In contrast to other types of handles that are geared towards windows, a crank window's mechanism and handle are subject to a significant amount of wear and tear that can cause the gears to strip and the handle to stop working or fall off the operator shaft. Regularly inspecting the crank handle and the mechanism for operating it will ensure that they stay in good condition for a number of years.
A crank handle is composed of a mechanical shaft that rotates perpendicularly and is connected to an arm. The arm is operated by grabbing it and turning it in a circular direction similar to how you operate a pencil sharpener. In certain instances, the handle may be leg-operated.
The base of a crank handle is hollow. This hole allows it to be connected to machinery and equipment. The handle's arm also comes with a connecting rod which converts the circular motion the handle into a rotary or reciprocating motion, which is used to operate machines and equipment.
In addition to adjusting equipment and machinery The crank handles are also commonly used on boats to help them be loaded onto trailers. They are usually made of stainless steel which is resistant to corrosion in marine environments.