Upvc
Window Handle Replacement (
Highwave.Kr)
It is easy to repair a damaged window handle with the right tools. But it's essential to identify the type of handle and its spindle length before buying a replacement.
Older uPVC windows feature cockspur handles for windows. They have a spur that protrudes to lock over a cockspur wedge striker plate. They can be left- or right-handed and must match when replaced.
What type of lock or handle do you have? I have?
There are a myriad of windows locks and handles made of upvc each with their own advantages and purposes. The type of handle you are using will determine how easy it is to open your windows and whether or not the locking mechanism works in the way you want it to. Over time and through regular use, upvc window handles can become damaged or worn out, rendering them less effective and secure. In some cases they may even fall off completely. If you notice that your upvc window handles have fallen off, it is essential to fix them as soon as possible. This will help prevent potential break-ins and protect your home from burglary.
Luckily, replacing your upvc window handles is a relatively simple task that can be done by nearly everyone. You will need a few tools, but with the appropriate knowledge, it's simple and should take only a couple of minutes. To get started you must determine the kind of handle and lock you have on your upvc window, which will help you identify the best replacement.
Inline Espagnolette Handles
These are the most commonly used type of upvc handles and
UPVC Window Handle Replacement are typically located on the side of your window. They have a flat design and come with an opening that is connected to the locking mechanism on the window frame when it is turned. Inline upvc handles also have a spindle that runs through the center of the handle and then into the frame of the window to operate the latch.
Cockspur Handles
They are typically found on older uPVC window frames and feature a distinctive, hook-shaped design. Cockspur handles are attached to the frame of the window with one screw, and are less secure than other kinds of window handles.
Tilt and Turn Handles
In contrast to other handles made of upvc, tilt and turn handles can be rotated to open the windows and tilted inwards to allow ventilation. They feature a 7mm spindle in the back and are available in right-hand and left-hand versions.
It is important to measure the spindle size when buying replacement handles made of upvc. There are a few that are exactly the same size. Drop something into the middle of the hole to measure the length. This is the maximum spindle length that will be suitable for your window.
What is the spindle?
uPVC window handles work similarly as doors, with the user turning the handle to open an opening inside the frame. This opens the window so that it can be closed and opened. But, at times, handles can be damaged, especially if they are regularly used or exposed to harsh weather conditions. This can lead to the need to replace your uPVC handles for windows as they might not be able to operate the window properly anymore.
There are several different types of uPVC handles available including Espag, Cockspur and Spaded handles. These handles are designed in a variety ways to fit into uPVC frames. Each handle type utilizes an entirely different spindle for locking the window mechanism. This is why it is essential to identify the kind of handle you have on your uPVC window to find the right replacement for it.
You can check what type of uPVC handle you are using by taking a look at the base of your handle. A snap-in cover is over the screw that holds the handle's base in position. After removing this you will be able to see the second screw that holds the handle base in position. Once both screws have been removed and you are able to take the handle out of the uPVC.
After you have removed the uPVC window handle, you will need to carefully remove the spindle you have removed from the locking mechanism. Take note of the length of the spindle. You will need to purchase a replacement with the same length as the original handle and locking device.
The spindle wears out and becomes inoperable with the locking mechanism. This can be caused by corrosion, damage due to frequent use, or a loosening locking mechanism. If this occurs, it will be necessary to replace the window handle and the locking mechanism to restore full functionality to your uPVC windows.
How do I take off the handle from the previous one?
window handle replacement handles can become damaged or even broken over the course of time. It is important to fix them as quickly as you can to ensure your safety. Fortunately, replacing a damaged or worn handle is a simple task that can be accomplished in less than a minute and doesn't require any specialized tools.
The first step to remove the handle that was previously used is to remove the screw situated at the top of the base of the handle. After this screw is removed, the handle will be pulled away from the base. There is a second screw that is located at the bottom of the handle's base and it can be removed as well. After these two screws have been removed, the handle can be removed from the base of the window.
After removing the handle and align the fixing holes of the new handle with the holes that are already in the window frame. There may be a tiny sticker or caps on the new handle, so remove them if needed and then screw the handle in the frame. It is important to check that the handle works once it has been installed. Turn the handle over and make sure that the lock mechanism is in place.
Espag handles feature spindles that protrude out of the handle and slot into the multipoint locking mechanism that is on the window frame. Cadenza windows come with an edge with cut-outs which slot into the lock mechanism, while Cockspur handles have an extended nose that hangs over either the outer frame or transom bar cross member within the window.
Once you have the new handle in place, insert the spindle inside the lock inside the window and then tighten it down. Replace the snap-in cover and screw cap (if necessary) once the handle is fixed. The handle is now ready to use to use, so try opening and closing the window several times to make sure that it works properly and securely.
How do I install the new handle?
It's not difficult to alter the handle on your Upvc windows. The process is simple. You'll need a screwdriver and a bit of perseverance. First, make sure the handle is not locked. Then, remove any visible screws. You can also replace them using screw caps. After removing the handle it is necessary to take an note of the length of the spindle which protrudes from the back of the handle. This is important because it will determine the kind of handle you will need to purchase.
Espagnolette handles are the most commonly used type of handle used on uPVC windows. They have a spindle that is connected to the handle and operates a locking mechanism within the window frame. The handle releases the latch and allows the window to open. As time passes and with regular use, espagnolette handles can become damaged or impaired and it is necessary to locate an alternative.
Cadenza handles are a type of uPVC handle that is usually used in tilt and turn windows. They have a protruding knife that is operated by a multi-point locking mechanism inside the window. They are more secure than espagnolette handles because they are able to open from the inside. They can be replaced by the same procedure as espagnolette handles however you must make sure that the new handle has a curved blade instead of flat ones.
Once you have decided on the right handle for you then you can place the new handle with the screw holes and then screw it into place.