How to Replace a UPVC Window Handle
If your window handle made of upvc is damaged, don't panic. Replacing a upvc window handle is a relatively simple task and can be completed in just a few steps.
If you are using a cranked or an in-line espagnolette window handle, all of them come with a square spindle bar that extends out from the back plate and is inserted into the locking mechanism.
Determine the lock type and handle
Over time window handles or locks may become damaged and lose their function. The good news is that this can usually be repaired without replacing the entire uPVC window unit. The first thing you need to do is to identify the type and size of the lock and handle. This will help you identify the replacement parts that you require.
Identifying the type of handle can be done by looking at the handle's base. There is an anchoring screw or pin that holds the handle to its base. If the screw is gone, it could indicate that the handle is separated from the base section. If the handle has split internally and isn't able to hold onto the spindle anymore it could be an indication that the handle must be replaced.
There are a number of different kinds of uPVC window handles, but the most common is the Espag handle. They are typically fixed using two bolts, and the spindle engages the locking mechanism within the frame of the window. These handles are typically used on uPVC tilt and turn windows.
Another kind of uPVC window handle is the Cockspur handle. They're similar to Espag handles, but have a lower projection from the frame. These handles are usually used on older uPVC window frames.
There are also Venetian window handles that are similar to the Espag handle, but have a flat base that allows them to be placed flush with the frame. These handles are a good option for homeowners who are looking for a stylish handle that will be a perfect match with their uPVC frames. These handles come in a variety of colours that will match any style.
Measure the spindle
It's important to be aware of how the handle fixed before you purchase the replacement. This will determine how tight or loose it is and whether it will fit correctly into the window frame. It is done by identifying the type of handle you own and determining the spindle length. The spindle is the metal shaft that connects the handle to the lock within the window frame. It's available in a variety of sizes and the current industry standard being 8mm. Older handles may have a cross-section of 9mm, so you'll need to measure your old handle to ensure you get the correct size replacement.
There are many kinds of window handles, however the most commonly used are inline Espagnolette and the cockspur handle. These handles operate a locking mechanism in the window, using shootbolt rods that secure the window when it's closed. Depending on the type of handle they are held in place using pins or screws.
You can buy Upvc handles replacement on the internet or in many DIY stores. They come in a range of finishes and are suitable for both new and replacement windows. They can also be key-locking or non-locking to provide additional security.
![image](https://www.repairmywindowsanddoors.co.uk/wp-content/uploads/2014/12/Glass-Replacement-150x150.jpg)
To remove the old handle just open the window to the door and unscrew all screws that hold it in place. Keep the screws in a container to protect them from damage. After the screws are removed,
Replace Upvc Window Handle carefully remove the handle. Find the distance from the base of the spindle to its tip. This will give you the information needed to buy the right replacement. The spindle of the handle is the shaft of steel that connects it to the lock gearbox in the window frame.
Remove the handle that was previously used
Switching a uPVC handle is a straightforward task that takes less than five minutes, if you have the appropriate tools. The first thing you need to do is identify the size and type of the lock or handle. This will allow you to determine the best replacement. Then, you can measure the spindle to ensure that the handle will fit. In the end, you'll need take the handle off and
Replace Upvc Window Handle it with the new one.
The majority of uPVC handles are inline Espagnolette handles, with a central spindle that slots into the window's locking mechanism. These are generally easy to take off, but you may require force if they are stuck. There are typically two screws that keep the handle in place, which can be removed with a screwdriver or pliers. There may be a need to remove pins, depending on the type of handle.
After you have removed the screws, you can remove the handle that was previously attached. If the handle is unlocked, the top of the baseplate should be visible. This will reveal two additional screws that can be removed. If the sticker is visible, you'll have to remove it.
You can now screw into the new handle using the screws from the old handle. Make sure that the handle is in the unlocked or open position, and then align the screw holes with the ones on the window. After you've done this then
replace window handles the cap screws. Test the new handle. Changing a uPVC window can be a simple and quick task, but it's crucial to take the time to complete the task correctly.
Install the new handle
If you've managed to remove the handle that you have on the frame, now is the time to fit your new handle. Begin by finding the screws and then removing them out with your screwdriver. After the screws are removed, put them in a secure place before proceeding to the next step.
Then, screw the spindle in by aligning it with the hole. Make sure that the holes in the handle with the holes in the window frame. Make use of screws of the same size as the previous one.
The Espag handle made of uPVC is fitted with a spindle of 7mm square which turns the lock mechanism of the window. This style of handle is commonly found in modern uPVC windows. uPVC Cockspur (also known by the name Cotswold) handles have an extended, curving nose that locks onto the outer frame or cross member of the transom bar. They are typically seen on older uPVC windows.
After the new handle is installed, it is important to verify that it functions properly by locking and unlocking the window several times. If everything goes according the plan, the new uPVC handle should be securely fixed and operating smoothly. If you encounter any issues, these steps will help you to diagnose the problem and resolve it quickly. If you are struggling with your uPVC handle or have any other issues with your home improvement using glazed do not hesitate to contact us at Bridgewater Glass for professional assistance. Our glaziers can repair or replace various window frames and handles. This makes us an ideal option for double glazing.
Test the new handle
Over time and through normal use the uPVC locks and handles can suffer from damage and wear and wear and. It can make them less secure and efficient which is why it's important to replace them right away. It's also an ideal idea to do this after you upgrade your windows, because changing the handle and lock will help maintain the integrity of your new windows.
There are many different styles of uPVC window handles. Some are fixed by pins or screws, while others have blades that slot into the lock mechanism. Each type has a different method of replacing it, so you need to know which one you have.
The most well-known type of window handle is called the espag. They are typically found on newer uPVC Windows. These handles have a spindle that extends out from the handle and goes into the lock gearbox, and when you open the window, it activates the locking mechanism. They are also simple to remove. However, you should be careful not to harm the mechanism or the handle.
Cockspur handles are another alternative for uPVC window handles. The locking mechanism is activated when the window is closed or tilted.