UPVC Window Handle ReplacementReplacing a broken window handle is a relatively easy task and, with the right tools, it can be done quite quickly. It is essential to identify the kind of handle you have and its spindle size before purchasing the replacement.
Older uPVC windows use cockspur handles for windows. They have spurs that protrude to the lock of a wedge cockspur striker plate. They can be left- or right-handed and must match when replaced.
What kind of lock or handle do I have?
There are many different types of window handles made from upvc and locks, each having their own benefits and purposes. The kind of handle you choose will determine the ease to open your windows and whether or not the locking mechanism works according to the plan. As time passes, and with regular use the handles made of upvc on your windows may become damaged and worn out. This makes them less secure and effective. In some instances, they could even fall completely off. If you find that your window handles have been removed, it's essential to repair them as quickly as you can. This will stop possible burglaries, and keep your house safe.
It's an easy task that almost anyone can do. You'll require some basic tools, but with appropriate knowledge, it's an easy task that will only take a few minutes. To begin you'll need to determine the kind of lock and handle you have on your upvc window, which will help you identify the best replacement.
Inline Espagnolette Handles
They are the most popular type of upvc handle and are usually located on the side of your window. They have a flat design and have a latch that connects to the locking mechanism on the window frame when it is turned. Inline upvc handles have a spindle running through the middle of the handle and into the window frame to control the latch.
Cockspur Handles
These handles are typically located on older uPVC windows and have a distinctive hook-shaped design. Cockspur handles are secured to the window frame by only one screw and are less secure than other varieties of window handles.
Tilt and Turn Handles
Unlike the other upvc handles that are tilt and turn, these handles can be rotated to open the windows and the handle can be tilted to the side to let air flow in. They feature a 7mm spindle on the back and are available both in left and right-handed versions.
It is important to measure the spindle size when buying replacement upvc handle. Not all of them are the exact same size. To determine the length of your handle made of upvc, simply drop something into the middle of the hole and then measure how far it extends before it comes into contact with an obstruction. This is the maximum size of spindle that will fit in your windows.
What is the spindle?
uPVC window handles operate similarly like doors. By turning the handle, you can operate a latch within the frame. The latch opens the window, so it can be opened and closed. But, at times, these handles can become damaged, especially when they are used frequently or exposed to extreme weather conditions. You may need to replace the handles on your uPVC window if they're not able to operate it properly.
There are a variety of uPVC handle options, including Espag, Cockspur, and Spaded handles. They are designed to fit inside the uPVC frames in different ways. Each handle has a particular spindle that is used to lock the mechanism fitted to the window. This is why it is essential to know the kind of handle you have installed on your uPVC window so you can get the correct
replacement window glass near me for it.
You can find out what kind of uPVC handle you are using by looking at the base section of your handle. There should be a'snap in' cover over one screw that holds the handle base in place. Remove this and then you should be able see the second screw at the opposite end of the base section of the handle. After both screws are removed then you should be able to remove the handle from the uPVC.
Once you have removed your uPVC window handle, you will need to carefully remove the spindle that was previously attached to the locking mechanism. Take note of the length of the spindle. You'll need to buy a replacement of the same length as the handle that was originally used and the locking device.
The spindle wears out and is unable to operate the locking mechanism. This could be due to damage caused by constant use, a loosening of the locking mechanism or even corrosion over time. If this happens, you will have to replace both the window handle and the locking mechanism to restore the full functionality of your uPVC Windows.
How do I get rid of my old handle?
Window handles can become damaged or broken over time. It is important to repair them as quickly as possible to ensure your security. It is easy to replace a damaged or worn handle. The task can be accomplished in under a minute without the need of special tools.
The first step to remove the handle that was previously used is to remove the screw that is situated on the top of the base of the handle. Once the screw is removed, the handle can then be pulled away from the base. Another screw will be situated at the base of the handle. This can also be removed. After both screws are removed the handle can be removed completely from the base section of the window.
After the handle has been removed, you can take the new handle and line up the fixing holes with the holes that are present in the window frame. There may be a tiny cap or sticker on the new handle, so remove these if necessary and then screw the handle into place. Once the handle is set, it is crucial to verify that it is working by turning the handle, and ensuring that the lock mechanism is activated.
Espag handles have spindles that protrude from the handle and slots into the multipoint locking mechanism of the window frame. Cadenza windows feature an edge with cut-outs which slot into the lock mechanism, while Cockspur handles have a long nose that hooks over either the outer frame or transom bar cross member in the window.
Once you have installed the new handle, slide the spindle into the window lock and tighten it. Replace the snap-in cover and screw cap (if appropriate) after the handle is securely fixed. The handle is now ready for use by opening and closing the window several times to make sure that it functions properly and securely.
How do I install the new handle?
Switching your uPVC window handle isn't a big deal and the process is actually very simple. You'll need a screwdriver and a bit of perseverance. The first thing to do is ensure that the handle is not locked and then remove any screws that are visible. you can also replace these by screw caps if you need. After you have removed the handle, you will need to note the length of spindle that extends from the back. This is crucial as it will determine the type of handle you'll require to purchase.
Espagnolette handles made of uPVC are the most sought-after kind of handle. They feature a spindle that is connected to the handle and acts as a locking mechanism inside the window frame. When the handle is turned, it releases the latch on the
window seal replacement and allows it to open. With time and regular use, espagnolette handles could be damaged or damaged,
UPVC Window Handle Replacement making it necessary to locate an alternative.
Cadenza handles are a kind of uPVC handle that is typically used in tilt and turn windows. They feature a protruding blade that operates a multiple-point locking mechanism inside the window. They are usually more secure than espagnolette handles as they are only accessible from the inside. You can replace them using the same method as you would with espagnolette handles however, make sure that the new handle is angled, not flat.