How to
Replace upvc window Handle a UPVC Window Handle
Don't panic in the event that your upvc window handle is broken. Replacing the handle of upvc on a window is a simple job that can be completed in a couple of simple steps.
It doesn't matter if you have an in-line or a cranked espagnolette window handle, they all have an elongated spindle that extends out of the back plate. This spindle is then fitted into the locking device.
Find out the lock type and handle
Over time window handles and locks could become damaged or lose their function. It is possible to fix this issue without replacing the entire uPVC unit. One of the first things to do is identify the type of lock and handle you have, as this will determine what replacement parts you will need.
Identifying the type of handle is done by looking at the base of the handle. A screw or pin will hold the handle to its base. If the screw is missing, it could be an indication that the handle has separated from the base section. If the handle has broken internally and no longer grips onto the spindle, this can be a sign that it is in need of replacing.
There are a variety of uPVC handles however the Espag handle is the most common. These are typically fixed by two bolts and feature a spindle that engages the lock mechanism inside the window frame. These handles are used on uPVC tilt and turn windows.
Cockspur handles are another kind of uPVC handle. They are similar to the Espag handle, however they are a little further from the frame. These handles are usually used on older uPVC window frames.
Finally, there are also Venetian window handles that are similar to the Espag handle but they have a flat base that allows them to be positioned flush with the frame. These handles are a great option for homeowners who are looking for an elegant handle that can blend in with their uPVC frames. The handles are available in a variety
cost of replacement windows uk colors that will match any decor.
Take a measurement of the spindle
It is crucial to be aware of how the handle fixed before you purchase an replacement. This will determine how tight or loose it is and whether it will fit properly into the window frame. This can be determined by identifying the handle type and determining the spindle's measurement. The spindle is a metal shaft that connects your handle to the lock in the window frame. The spindle is available in a variety of sizes. The current standard for the industry is 8mm. Older handles could have a cross-section of 9mm, so it's crucial to measure the old one to ensure you get the correct size replacement.
There are many types of window handles. The most common are the inline Espagnolette handles and cockspur handles. These handles operate a locking system inside the window. They employ shootbolt rods to secure the window when it is closed. Depending on the type of handle, they are held in place with screws or
replace upvc window handle pins.
You can find replacement handles for windows made of upvc on the internet and in many DIY stores. They come in a range of finishes and are suitable for new or replacement windows. To ensure security they can be key-locking or non-locking fire-escape.
To take off the handle, simply open the window towards the door and unscrew all the screws holding it in place. Keep the screws in a container to prevent damage. After the screws have been removed, gently pull out the handle and measure from the base to the tip of the spindle. This will give you the information needed to buy the correct replacement. The spindle of the handle is the iron shaft that connects it to the gearbox that locks the window frame.
Remove the old handle
The replacement of a uPVC window handle is a straightforward task that typically requires no more than five minutes with the right tools. The first step is to identify the type of lock and handle that will allow you to identify the right replacement. You can then measure the spindle to determine if the handle will fit. In the end, you'll need take the handle off and replace it with the new one.
The majority of uPVC handles have inline Espagnolette handles. These handles feature central spindles that slot into the locking mechanism on the window. They are usually easy to remove, however you may have to apply force to remove them if they are stuck. There are typically two screws that hold the handle in place which can be removed with either pliers or a screwdriver. Depending on the kind of handle, you may also have to remove any pins that are holding it in place.
After removing the screws, you can remove the handle that was previously attached. When the handle is open and the top of the baseplate should be visible. It will reveal two more screws that can be unscrewed. If the sticker remains in place, you'll need to remove it.
It is now possible to screw in the new handle using the screws from the previous handle. Make sure the handle is in an open or unlocked position, and then align the screw holes to the holes on the window. Once you've done this you can put on the caps on the screws and test the new handle to confirm that it functions properly. It's simple to swap a uPVC handle, but you must do it correctly.
Fit the new handle
If you've managed to successfully remove the handle that you have on the frame, now is the time to fit your new handle. Begin by locating and removing the screw covers with your screwdriver. Once the screw covers are removed, store them in a secure location before proceeding to the next step.
Next, insert the new spindle into the handle by aligning it with the hole in the handle and screwing it in. Align the holes on the handle with the ones in the window frame. Use a screw of the same size as the previous one.
The Espag handle made of uPVC is equipped with a spindle that is 7mm square which turns the lock mechanism of the window. This style of handle is commonly found in modern uPVC windows. uPVC Cockspur handles (also called Cotswold handles) have long noses that lock over the outer frame or transom bar cross member and are typically found in older windows made of uPVC.
After the new handle is installed, it's crucial to test that it works correctly by locking and unlocking the window several times. If everything is in order then your new uPVC window handle should now be properly attached and running smoothly. If you encounter any issues these steps will assist you to diagnose the problem and fix it swiftly. If you're having trouble with your uPVC handle or any other problems with your glazed home improvement, don't hesitate to contact us at Bridgewater Glass for professional assistance. Our glaziers are able to repair or replace various window frames and handles. This makes us an ideal choice for double glazing.
Test the new handle
In time and with regular use, uPVC handles and locks may be damaged and wear and wear and tear. This can make them less secure and efficient which is why it's crucial to replace them as quickly as you can. It's also an ideal idea to do this after you upgrade your windows, because changing the handle and lock will maintain the integrity of your new windows.
There are a variety of styles of uPVC window handles. Some are attached to the frame with pins or screws, while others feature blades that slot into the lock mechanism. Each type has its own method of replacement, therefore it's important to know what type you have before you start working on it.
Espag window handles are the most common type, and are usually used on newer uPVC windows. These handles come with spindles that extend from the handle to the gearbox for locking and when you open the windows, it triggers the locking mechanism. These handles are also easy to take off. However, you should be careful not to harm either the mechanism or the handle.
Cockspur window handles are another popular option for uPVC windows.