How to Replace a UPVC Window Handle
Don't panic when your upvc handle has become broken. Replacing the upvc handle on the window is a simple job that can be completed in a couple of simple steps.
No matter if it's an in-line or a cranked window handle each one has an elongated spindle that extends from the back plate. This spindle is then fitted into the locking device.
Determine the lock type and handle
Over time window handles and locks may be damaged or lose their functionality. The good thing is that this can often be remedied without replacing the entire window unit made of uPVC. The first thing to do is to identify the size and
window.Replacement near me type of your handle and lock. This will help you determine the replacement parts that you need.
Identifying the type of handle is done by looking at the base of the handle. There is an anchoring screw or pin that holds the handle to its base. If the screw is missing, it could be an indication that the handle has separated from the base section. If the handle is broken internally and does not grip the spindle anymore it could be a sign that the handle should be replaced.
There are a number of different types of uPVC window handles The most well-known is the Espag handle. They are usually secured by two bolts and feature a spindle that engages the lock mechanism inside the frame of the window. These handles are typically used on uPVC tilt and
window.Replacement near me turn windows.
Cockspur handles are another kind of uPVC handle. They are similar to the Espag handle, but they are a little further from the frame. These handles are generally used on older uPVC window frames.
There are also Venetian window handles that are similar to the Espag handle, but have a flat base that allows them to be placed flush with the frame. They are an excellent choice for homeowners who are looking for a stylish, elegant handle that will blend in with their uPVC window frames. They are also available in a broad range of colours to match any decor.
Measure the spindle
Before ordering a new handle, it's essential to know how the old one is connected. This will help determine if it's too tight or loose and also if it can fit inside the window frame. It is done by identifying what kind of handle you have and measuring the length of the spindle. The spindle is a metal shaft that connects the handle to the lock in the window frame. It's available in different sizes with the current industry standard being 8mm. Older handles may have a 9mm cross-section therefore it's essential to determine the cross-section of the old one to make sure you get the proper size replacement.
There are various kinds of window handles. The most commonly used are the inline Espagnolette handles and cockspur handles. These handles operate a locking system inside the window. They use shootbolt rods that secure the window after it has been closed. Depending on the type of handle, they are held in place by pins or screws.
You can find replacement handles for windows made of upvc online and in most DIY stores. They are available in a variety of finishes, and are suitable for windows that are new or replacement. They can also be key-locking or non-locking to provide additional security.
To remove the old handle just open the window towards the door and unscrew all screws that hold it in place. Be careful not to cause damage to the screws and place them in a container for future use. After the screws are removed, gently pull out the handle and measure from the base to the top of the spindle. This will give you the information needed to buy the right replacement. The handle's spindle is the shaft made of metal that connects it to the lock gearbox in the window frame.
Take off the handle from the old one.
Changing a uPVC window handle is a straightforward job that usually will take no more than five minutes with the right tools. The first thing you need to do is identify the size and type of the lock or handle. This will help you select the appropriate replacement. Then, you can take measurements of the spindle to make sure that the handle is suitable. The old handle will need to be removed and replaced with the new one.
The majority of uPVC handles have inline Espagnolette handles. They have an internal spindle that slots into the locking mechanism on the window. They are generally simple to take off, but you may have to apply force when they're stuck. There are typically two screws that keep the handle in place which can be removed with either pliers or a screwdriver. There may be a need to remove pins, based on the kind of handle.
After removing the screws, you can take off the handle that was previously attached. If the handle is unlocked the top of the baseplate should be visible. This will reveal two additional screws that can be unscrewed. If the sticker remains visible, you'll have to take it off.
It is now possible to screw in the new handle using the screws that came with the old handle. Make sure that the handle is in the unlocked or open position, and then align the screw holes with the holes on the window. After you have done this, replace the cap screws. Test the new handle. Changing a uPVC window can be a quick and simple job, but it's important to take the time to do it correctly.
Install the new handle
If you've managed to remove the existing handle from the frame, now is the time to install the new handle. Begin by finding the screw covers and then lifting them out using a screwdriver. Once they are removed, put them in a secure place and move on to the next step.
Then screw the spindle into by aligning it with the existing hole. Be sure to align the holes of the handle with those in the window frame and use a screw that is of the same length as the ones previously used or it could result in the handle not being secure.
uPVC Espag handles are equipped with a 7mm square spindle that rotates the lock mechanism fitted to the window. This type of handle can be commonly found in modern uPVC windows. uPVC Cockspur (also known as the name Cotswold) handles have an extended, curved nose that is secured to the frame's outer or cross member of the transom bar. They are often found on older uPVC Windows.
It's important to lock and unlock the window a few times after the handle is installed. If everything goes according to plan, the new uPVC handle should be properly attached and running smoothly. If not, the steps listed above will help you identify any problems and get it fixed quickly. If you're struggling with your uPVC handle or have any other problems with your glazed home improvement do not hesitate to contact us at Bridgewater
glass replacement windows for professional assistance. Our glaziers are able to repair or replace different window handles and frames. This makes us an excellent choice for double glazing.
Test the new handle
Over time, uPVC handles can get damaged and worn out. They can become less secure and efficient which is why it's crucial to replace them as quickly as possible. It's also a good idea to do when you are upgrading your windows. Changing the handle and locking mechanism will help maintain the integrity of your new windows.
There are a variety of uPVC window handles. Some are fixed with screws or pins, while others feature blades that fit into the lock mechanism. Each lock type has its own way to replace it, and you'll need to know which one you own.
Espag window handles are the most common type, and are usually found on newer uPVC windows. These handles have a spindle that extends out from the handle and into the gearbox for locking and when you open the window it triggers the locking mechanism. They are also simple to take off.