How to Replace a UPVC Window Handle
If your window handle made of upvc is damaged, don't be concerned. Replacing the upvc handle on windows is a straightforward task that can be accomplished in a couple of simple steps.
No matter if you have a cranked or in-line espagnolette type of window handle, they all come with a square spindle bar that extends out from the back plate and is inserted into the locking mechanism.
Determine the type and size of the handle and lock.
Over time window handles and locks may become damaged or lose their functionality. It is possible to fix this issue without replacing the entire uPVC unit. One of the first things to do is determine the type of lock and handle you have because this will help determine the parts will be required for replacement.
You can identify the kind of handle by looking at its base. There will be the screw or pin that is holding the handle to its base. If the screw is not present, this can be a sign that the handle has broken away from its base. If the handle is broken internally and doesn't grip the spindle anymore, it may also be an indication that the handle needs to be replaced.
There are a variety of different kinds of uPVC window handles The most well-known is the Espag handle. They are usually fixed with two bolts and the spindle works with the locking mechanism of the frame of the window. These handles are used on uPVC tilt and turn windows.
Cockspur handles are another kind of uPVC handle. They're similar to Espag handles, however they have smaller projections from the frame. These handles are typically used on older uPVC windows.
Venetian window handles are a different alternative. They are similar to Espag handles but have a flat bottom which allows them to be positioned flush with the frame. These handles are a good option for homeowners who are looking for an elegant handle that can be a perfect match with their uPVC frames. These handles come in a variety of colors that will match any decor.
Take a measurement of the spindle
Before ordering a new handle, it's crucial to understand how the original is connected. This will tell you how tight or loose it is and if it will fit correctly into the window frame. You can do this by identifying the kind of handle you have and measuring the spindle length. The spindle is a metal shaft that connects the handle to the lock in the window frame. The spindle is available in a variety of sizes. The current industry standard is 8mm. Older handles could have a 9mm cross-section therefore it's essential to determine the cross-section of the old one to ensure you get the correct size replacement.
There are a variety of window handles, but the most common are inline Espagnolette and Cockspur handles. These handles are operated by an locking mechanism within the window, using shootbolt rods that lock the window when it's closed. Depending on the type of handle, they are held in place by screws or pins.
You can find replacement handles for windows made of upvc on the internet and in many DIY stores. They are available in various finishes, and can be used to make new or replacement windows. For extra security they can be key-locking or non-locking in fire-escape.
To take off your old handle, open the window and unscrew the screws that secure it. Store the screws in a container to prevent damage. After the screws are removed, remove them carefully from the handle. Take a measurement of the distance from the base of the spindle to its end. This will give you the information needed to buy the correct replacement. The handle's spindle is the metal shaft that connects it to the lock gearbox within the window frame.
Remove the handle that was previously used
The
replacement double glazing windows of the handle of an uPVC handle is a straightforward task that takes less than five minutes, if you have the right tools. The first thing you need to determine is the type and size of the handle or lock. This will allow you to determine the best replacement. Then, you can measure the spindle to make sure that the handle will fit. Finally, you'll need to remove the handle you have been using and
window replacement replace it with the new one.
The majority of uPVC handles have inline Espagnolette handles. These handles feature central spindles that slot into the locking mechanism on the window. They are usually easy to take off, but you may need to use force if they are stuck. There are typically two screws that hold the handle in place, which can be removed using either pliers or a screwdriver. Depending on the type of handle, you might also need to remove any pins that are holding it in place.
Once the screws are removed After that, you can take off the handle. The top of the base plate should be visible when the handle is in the open position, revealing two screws that you can unscrew. There's also a small silver or other color sticker that must be removed if it's in place.
With the screws that came off the handle, you are now able to put the new handle in place. The screw holes should be aligned on the
Window replacement with the holes in the handle. After this is done, you can replace the screw caps and test the new handle to make sure that it works properly. Changes to a window made of uPVC can be a simple and quick task, but it's crucial to make sure you do it correctly.
Install the new handle
If you've managed to take the handle off the frame, now is the time to put in your new one. Start by locating and removing the screws with your screwdriver. Once removed, place them in a safe location and move on to the next step.
Next, put the new spindle in the handle by lining it up with the existing hole and screwing it in. Make sure that the holes on the handle to those in the window frame. Use a screw of the same size as the previous one.
The Espag handle made of uPVC is equipped with a spindle that is 7mm square that turns the lock mechanism of the window. This kind of handle can be commonly found in modern uPVC windows. uPVC Cockspur handles (also called Cotswold handles) have an extended nose that locks over the frame's outer or transom bar cross members and are often found in older uPVC windows.
It is essential to lock and unlock the window numerous times after the handle is installed. If all goes according to plan, the replacement uPVC handle should be properly attached and running smoothly. If not, the steps listed above will help you diagnose any problems and get it fixed quickly. If you're having trouble with your uPVC handle or have any other issues with your home improvement using glazed, don't hesitate to contact us at Bridgewater Glass for professional assistance. Our glaziers can repair or replace various window handles and frames. This makes us an excellent option for double-glazing.
Test the new handle
Over time, uPVC handles become damaged and worn out. They can become less secure and efficient and therefore it is important to replace them as soon as you can. It's also a good idea to do when you are upgrading your windows. Change your handle and locking mechanism will help maintain the integrity of your new windows.
When it is to uPVC window handles, there are a variety of different styles. Some are secured with pins or screws,
window replacement whereas others feature blades that fit into the lock mechanism. Each lock type has its own method of replacing it, and you'll need to know which type you have.
Espag window handles are the most popular type, and they're typically used on newer uPVC windows. The spindle extends from the handle into the lock gearbox, and it activates the locking system when you open the window. They're also simple to remove however, you must take care not to damage the mechanism or the handle when doing so.
Cockspur window handles are another popular choice for uPVC windows.