Autowatch Ghost 2 Immobiliser Installation Service
Install a Ghost immobiliser that is TASSA approved and DBS security verified.
The Ghost system operates silently on the vehicle's CAN network, and is unnoticeable to criminals using diagnostic tools because it doesn't emit any radio signals.
Easy to install
Autowatch Ghost is a discrete anti-theft gadget that protects your vehicle from key cloning or hacking. It utilizes your vehicle's buttons to generate an e-mail push sequence which must be entered in order to start your vehicle. This will stop thieves from stealing keys to your vehicle and then driving off with it, or at the very least delay the journey to get the vehicle repaired.
The system can be installed by a certified installer such as Car Theft Solutions. No wires are cut during installation. It is directly connected to the CAN data network of your vehicle, which means there aren't any "fobs" or indicators to indicate the presence of the device. This makes it extremely difficult for thieves to spot, unlike passive devices to prevent theft, such as steering wheel locks.
The Ghost 2 will make your Porsche virtually untraceable to thieves. If they attempt to start the car without a pin number or app authorization, the engine will be blocked. The system is able to accomplish this by using the factory buttons on the steering wheel as well as the centre console. You can also set up a unique sequence of buttons (similar to pin numbers) that must be used to start the engine.
You can set the Ghost in Valet and Service mode once you've created your own personal disarming sequence. This allows you to start your car when it's being repaired or taken to a garage for work, but it will only allow you to use your pre-set app or pin. If you forget your PIN you can make use of the app to get an alternative one so that you never have to worry about disclosing it to anyone who should not be driving your vehicle!
The
Ghost ii immobiliser 2 has QR finger print labels which are linked to the International Security Register and registered to you. This provides you with an additional level of protection in the event that your vehicle is damaged for parts, as the unique code allows your car to be immediately traced back to you.
Low-maintenance
Car thieves aren't smarter than ever, so technology has evolved to outsmart them. Stealth immobilisers were developed to prevent your car from becoming their next target. Ghost immobilisers work independently of the vehicle’s factory-fitted alarm or tracker security devices. They offer an additional security level that cannot be tampered.
This cutting-edge technology connects to your vehicle's CAN Data Network and a personal PIN code sequence is programmed using the buttons on your steering wheel door cards or central console. If the code is not entered prior to starting the engine, the Ghost immobiliser stops it from starting, thus preventing you and your passengers from leaving the vehicle.
The device is small enough to be hidden inside the wiring harness of your vehicle. It is weatherproof and silent and does not emit radio frequency signals. This means it can't be detected using sophisticated RF scanning technologies or code-grabbing techniques. Additionally, because it is connected to the CAN Data Network it can't be disabled by simple wire cutting or circuit jumps, making it a low-maintenance device.
If you're planning on selling your car at any time, the Ghost immobiliser is completely transferable to your new car as long that it meets the compatibility standards. This means that if your vehicles during the time you own the Ghost it will not become obsolete. This is a major benefit for anyone who takes pride in their vehicles.
In contrast to older immobilisers, the
ghost 2 immobiliser cost does not require an additional key fob or LED indicator to function, which means it can be used even in the dark. The PIN can be as short or as long as you like (up to 20 presses) and it can also be changed in the event of an emergency in case you forget your PIN. It can be set to valet and service mode, which means that your car can drive for a brief period in case you wish to leave it at a mechanic's shop or valet service to do some work.
Unrecognisable to thieves
A standard factory fitted immobiliser protects your vehicle by preventing the engine from starting without the correct key fob and code sequence. However the Ghost immobiliser functions differently. It communicates with the electronic control unit of your car by connecting to the CAN data circuit. This means that thieves cannot escape the system through reprogramming or other methods. It is also silent and does not emit radio signals. This makes it difficult to detect.
Ghost will safeguard your precious or expensive vehicle from thieves. You'll be able to rest assured that the money you put by customizing or modifying your vehicle is protected.
Ghost is a discrete and simple device that is fitted into the wiring of your car so it doesn't interfere with the aesthetics of your vehicle. It works by connecting to the CAN bus network and communicates with the center console or
Ghost Ii Immobiliser the steering wheel buttons. It's easy to install and can be hidden, ensuring that it is unnoticeable to thieves. It's also low maintenance and does not require a radio signal or battery to operate, which means it won't be vulnerable to hacking.
The autowatch Ghost-II anti-key clone is an elegant new device that will give your car the most advanced security. This is the first aftermarket CAN-bus immobiliser to be verified by TASSA. It's an absolute must-have for anyone who is concerned about their car safety.
With car theft on the rise, it's important to take steps to stop it. The Ghost immobiliser is an ideal solution. This smart system locks your engine until you enter a unique code or download the app. This stops a burglar from starting your car with the proper keys.
A Ghost immobiliser can give you peace of mind for a minimal cost. It can be heartbreaking particularly if you've invested lots of time and money into your vehicle. The Ghost immobiliser will keep your joy and pride where it belongs.
It is possible to install without marks on the body of the vehicle.
Immobilisers are devices that stop your vehicle from being driven by your key fob. Immobilisers have been required in new cars since 1998. They are installed in your vehicle's CAN data network, which means that thieves are unable to detect them or disarm them by cutting wires. It is nearly impossible for thieves to steal your vehicle because they can't start it without a key fob, or a mobile phone with the Autowatch application downloaded. This is particularly important if you have spent time and money customising your car since it will prevent them from taking it away without your permission.
The Ghost 2 immobiliser can be installed in a concealed location to ensure that it isn't visible to the untrained eye. It is connected to the CAN (controller of the vehicle) and is controlled by your ECU. It is very small, works silently and does not transmit radio signals, so it isn't able to be detected by thieves. The Ghost comes with a built-in battery that can be replaced so it can continue to function even if there is a power failure.
The Ghost requires the pin code be entered to begin the car. The app on your smartphone will allow you to enter the code, so that only you can know it. You can also put your vehicle in Service/Valet mode which permits it to start without the PIN code. This is beneficial when you need to take your vehicle to Valet or garage. You can alter the PIN at any time for added security.
The technology used to stop thieves has also evolved as they become more sophisticated.