Why You Need a
Ghost 2 Immobiliser Fitting Near Me
Modern thieves can rob a car within a matter of minutes. They use the OBD port of the car to hack into the ECU and then duplicate a key, all using a laptop hidden in the vehicle.
An Autowatch Ghost immobiliser stops this by sending a series of pin codes through existing buttons in your vehicle (steering wheel and central console). It is totally undetectable to anyone in your car.
There are no key fobs or LED indicators, or
ghost immobiliser installation any other ways to locate the vehicle are in place.
If you're looking for a way to stop keyless entry theft or key cloning, then look at the ghost immobiliser. This device is designed to protect your vehicle against these types of attacks by blocking the engine after a valid pin code has been entered. This is an extremely effective method of safeguarding your car, and car insurance companies recognise it as a safety measure that can help reduce the cost of your insurance.
The ghost connects to your vehicle's CAN data network. Once installed by Car Theft Solutions, it will only work when you enter your personal override code and a specific button combination. The engine will not start when you attempt to start your vehicle without using the code. The criminal will then realize that they've been caught and are likely to get out of the vehicle and run off.
This system has the advantage of not transmitting any signals like the tracker. Thieves can't make use of RF receivers to pinpoint your Ghost unit's location. It doesn't emit IR (infrared signals) like typical remote control key fobs as well as trackers, making it hard to bypass or hack.
The Ghost also has valet-mode which can be activated if you are transferring your vehicle to an individual for parking or service. This will turn off the immobiliser can for 30mph and permit you to drive as normal with your key fob. The Ghost will function fully when the vehicle is parked again.
If you would like to find out more about the Ghost immobiliser or want us to install it in your vehicle then you can contact us at Car Theft Solutions today. We are a family-run business with more than 10 years' experience in the field of vehicle security. This includes the
Ghost immobiliser installation. We are a Thatcham-approved installer for Ghost products and our name is built on the satisfaction of our customers.
No hacking, cloning or altering
The Autowatch Ghost is one of the most advanced immobilisers available on the market. It shields your car from hacking or key cloning, making it near impossible to take. The only way to steal your car is to physically remove it. Even then, they would not be able start the engine.
This is because unlike other immobilisers which only stop your vehicle from starting if you don't have a fob, the Ghost's clever system actually cuts off the engine control unit to prevent the vehicle from being started. The system communicates an alert via buttons on the steering wheel, door panel or centre console. It is only disarmed with the proper pin code configuration.
Its sleek and discreet design allows it to be seamlessly into your vehicle without the requirement for additional keys or LED indicators. It functions independently of the factory tracker or alarm. It is a CAN-bus immobiliser, which means it sits in the control network of your vehicle and doesn't interfere with existing devices, such as your vehicle's key fob or alarm.
This exclusive technology is not easily detected by thieves unlike other systems that rely on codes grabbing and RF scanning. It only sends pin codes in a silent manner through the buttons on your vehicle's steering wheel doors, door panels or central console. The Ghost is an innovative device that protects your vehicle from keyless entry and smart key theft. It does this by creating an individual, unique pin code that needs to be entered to disarm it.
The number of keyless entry vehicles on the road is increasing. Thieves are becoming more sophisticated and use cloning devices which can be bought through classifieds or online for less than PS15. They can then use the fob that is cloned to gain access to your vehicle. A standard vehicle immobiliser only stops the engine from starting when you have your original key fob, this is not enough security and makes it easy for criminals to spoof or block signals to unlock the vehicle.
Valet mode
A standard immobiliser fitted to your vehicle is an electronic chip which sends an alert when you press the key fob button. The system will then look for the particular code you have that was sent from the key to start the car. If the correct signal isn't received, it will cut off and stop the engine from getting started. This is the fundamental principle behind all aftermarket immobilisers and is a crucial security measure to ensure that your vehicle isn't stolen even if a burglar has your keys or a device that could boost your key fob signal.
But a
ghost immobiliser fitting immobiliser doesn't only stop that however, it goes far beyond that. The system, located on the CAN Bus of your Mercedes, has been programmed with a unique pin code that needs to be entered in order to start the car. This is then locked in your app, and only anyone else will be able to access it without having the same pin that you have.
The system will also stop cloning, signal jamming and hacking (which thieves may use to bypass the immobiliser on your vehicle). If a burglar is able to get their hands on the keys to your car or fob, they won't be able to start your vehicle even if it is parked nearby. They may only be able to steal your car off flatbed trucks and that's highly unlikely.
Valet mode is a standard feature with your ghost immobiliser. When it is turned on the glove box as well as trunk of your vehicle will be locked. This means that anyone attempting to take your car away will not have anything personal to take. It will also limit the speed of your Tesla so that it cannot be driven at speeds of more than 70mph. It will also turn off ludicrous modes. It will also hide your work and home addresses and restrict your driver profiles and also lock your Tesla dashboard to ensure that no one else is able to access your private data.
If you would like to use your vehicle for valet parking, or for service, select the 'Valet/Service' option on your dashboard app. Enter your 4-digit valet code on the touchscreen. After this is done, the alarm functions will be bypassed, but it will still block the ability to start your car until a valid pin has been entered. This is perfect for people who need to hand their car over to others, such as garage mechanics and taxi drivers.
The first aftermarket CAN bus immobiliser for the world
The Autowatch Ghost is the world's first aftermarket CAN bus immobiliser and provides security that is unmatched by anything on the market today. It guards against key hacking or cloning, and even the theft of keys. It does this through the vehicle's current interface. It doesn't require any additional fobs or remotes however, it instead connects to the vehicle's data network, CAN. This makes it a stealth gadget.
The device is a circuit board hidden inside your car's engine control unit (ECU). It functions quietly. Once activated, it'll prevent the car from starting until a PIN is entered. This is the code you will receive when you request an installation. This number will be needed to activate valet mode, disable the alarm, or allow you to leave in the car of your friend (if they have Ghost installed). Ghost installed too).
It is designed to ensure that it cannot be detected by anyone looking inside your car's interior. It does not send any radio signals, and is only heard when it's activated. It can be placed in a variety of locations, making it nearly impossible to detect.