UPVC Window Handle ReplacementIt's simple to replace a broken window handle with the proper tools. It is important to know what kind of handle you have as well as the size of its spindle before purchasing the replacement.
Older uPVC window handles have a spur which protrudes and locks on the wedge striker for cockspur. They can be right or left-handed and have to match when replacing.
What type of lock or handle do I have
There are many kinds of window handles made of upvc and locks, each with their own benefits and purposes. The kind of handle you choose will determine how easy it is to open your windows and if the locking mechanism functions as intended. Over time and through regular use, upvc window handles may become damaged or worn out, making them less secure and effective. In some instances, they may even be completely removed. It is important to repair the handles on your window made of upvc as soon as you see them falling off. This will prevent potential break-ins and keep your home safe.
It's a task that anyone can complete. You will need some basic tools, but with the right knowledge, it is a straightforward process that should only take a couple of minutes. To get started you must determine the kind of lock and handle that you have on your window made of upvc, which will help you identify the best replacement.
Inline Espagnolette Handles
These are the most common kind of upvc handle and are usually located on the outside of your window. They are flat and come with a latch which engages the locking mechanism of the window frame. Inline upvc handles have a spindle that runs through the middle of the handle to the window frame to control the latch.
Cockspur Handles
They are typically found on older uPVC window frames. They have distinct hook-shaped designs. Cockspur handles are attached to the frame of the window with a single screw and are less secure than other kinds of window handles.
Tilt and Turn Handles
Unlike the other upvc handles that are tilt and turn, these handles can be turned to open the windows and tilted inwards to allow ventilation. Generally, they have a 7mm spindle at the back of the handle. They are available in both left and right-handed versions.
It is crucial to determine the spindle's size prior to purchasing a replacement handles made of upvc. There are a few that are exactly the same size. Drop something in the middle of the hole to test the length. This is the largest spindle size that will fit into your windows.
What is spindles?
uPVC window handles operate similar as doors, with the user turning the handle to open a latch inside the frame. The window then opens and closed. The handles can become damaged, particularly if they're often used or are subjected to harsh conditions. This can leave you needing to replace your uPVC handles for windows as they may not operate the window properly in the future.
There are a variety of uPVC handle options, such as Espag, Cockspur, and Spaded handles. They are made in a variety of ways to fit into uPVC frames. Each handle type uses an individual spindle to lock the window mechanism. This is why it is essential to know what type of handle you have on your uPVC window to get the correct replacement for it.
The base section of the handle will tell you what type of uPVC it is. A snap-in covers should be over the screw that holds the handle's base in position. Remove this and then you should be able to see the second holding screw located at the opposite end of the base section of the handle. Once both screws are removed you should be able to pull the handle away from the uPVC window.
After removing the uPVC handle, remove it from the locking mechanism. Note the length of the spindle. You'll need buy a replacement of the same length as the original handle and locking device.
The main issue with most window handle problems with uPVC is that the spindle becomes worn out and cannot longer operate the locking mechanism. This can be due to damage from constant use or a loosening of the locking mechanism or even corrosion that occurs over time. If this occurs, you will have to
replace upvc window handle both the window handle and locking mechanism in order to restore the full functionality of your uPVC Windows.
How do I get rid of the handle from the previous one?
Through time and regular usage, window handles could become damaged or broken and if this happens, it is essential to fix them as soon as possible to ensure the safety of your home. It is good to know that replacing a worn or damaged handle is a simple job that can be carried out in less than an hour and doesn't require any special tools.
To remove the handle, first remove the screw at the bottom of the handle. Once the screw has been removed, the handle will be removed. A second screw is located at the bottom of the handle. This too can be removed. Once these two screws are removed, the handle can be removed from the window's base.
Once the old handle has been removed, take the new handle and line up the fixing holes with the holes that are present in the window frame. If there is a sticker or cap on the new handle, take it off it if necessary and then screw the handle in the appropriate position. It is important to check that the handle is working after it has been installed. Turn the handle over and ensure that the lock mechanism is working.
Espag handles feature spindles that protrude out of the handle and slot into the multipoint locking mechanism of the window frame. Cadenza windows feature a blade with cutouts which fit into the lock mechanism. Cockspur handles are long and hook over the frame of the window or the transom bar crossmember.
After you have put in the new handle, insert the spindle inside the window lock and tighten it. Once the handle is firmly fixed in place, replace the'snap in' cover and screw cap (if applicable). When the handle is ready to use, you can open and close the window a couple of times to make sure that it functions properly and securely.
How do I install the new handle?
It's not difficult to alter the handle on your Upvc windows. The process is very simple. All you require is a screwdriver, and a little bit of patience. First, make sure that the handle that you are replacing is unlocked. Then, remove any screws visible. You can also replace them with screw caps. After removing the handle, you'll need to take note of the length of the spindle which extends from the back. This is crucial as it will determine the kind of handle that you will need to purchase.
Espagnolette handles on uPVC are the most popular kind of handle. The spindle is inserted into the handle to control the locking mechanism inside the frame of the window. Once the handle is turned it opens the latch on the window,
upvc window handle replacement allowing it to open. As time passes and with regular use, espagnolette handles may be damaged or damaged, making it necessary to locate a replacement.
Cadenza handles are a kind of uPVC handle that is commonly used with tilt and turn windows. They feature a protruding knife that operates a multiple-point locking mechanism within the window. They are more secure than an espagnolette handles because they are able to open from the inside. They can be replaced using the same method as espagnolette handles, however you will need to make sure that the new handle has an angled blade as opposed to one that is flat.
Once you have determined the correct handle to purchase, you can simply align the new handle to the existing screw holes and then screw it into the appropriate position. You should then put the screw covers back on and test that your new handle is operating properly. You can do this by moving the handle between the locked position to the unlocked for a few times.