UPVC Window Handle ReplacementReplacing a broken window handle is a simple process and with the right tools it can be done quickly. However, it is essential to know the handle's type and spindle's length prior to purchasing a
replacement windows near me.
Older uPVC windows have handles with cockspurs, which have an extension spur that can the lock of a wedge cockspur striker plate. These can be right-handed or left-handed, and must be compatible when replaced.
What kind of lock and handle do I need?
There are many kinds of window handles made from upvc and locks, each with their own benefits and purposes. The type of handle you have will determine whether or not the locking mechanism you have is effective and if it's easy to open windows. Over time, and with regular use the handles made of upvc on your windows may get worn out and damaged. This makes them less secure and effective. In some instances they might even fall off completely. If you notice that your upvc window handles have fallen off, it is essential to repair them as quickly as you can. This will help to avoid burglaries and keep your home safe.
The good news is that replacing your window handles made of upvc is a simple task that can be completed by nearly anyone. You'll require some basic tools, but with proper knowledge, it's a straightforward process that should only take a couple of minutes. It is important to know the type of lock or handle you have on your window. This will help you choose the appropriate replacement.
Inline Espagnolette Handles
They are the most popular type of upvc handles and are usually located on the outside of your window. They have a flat design and have a latch that engages with the locking mechanism on the window frame when it is turned. Inline upvc handles also have a spindle that runs through the middle of the handle and then into the window frame to operate the latch.
Cockspur Handles
They are typically found on older uPVC window frames. They have distinct hook-shaped designs. Cockspur handles are held to the frame of the window with a single screw and are less secure than other types of window handles.
Tilt and Turn Handles
Unlike the other handles made of upvc, tilt and turn handles can be rotated to open the window, and tilted inwards to allow ventilation. They feature a 7mm spindle in the back and
UPVC Window Handle Replacement are available both in left and right-handed versions.
It is important to measure the size of the spindle when purchasing a new upvc handles. Not all are exactly the same size. Drop something into the middle of the hole to test the length. This is the longest spindle length that will fit in your window.
What is the spindle?
uPVC window handles operate similarly as doors, with the user turning the handle to operate a latch inside the frame. The window is then opened and closed. However, sometimes handles can be damaged, particularly when they are frequently used or exposed to harsh weather conditions. This can lead to the need to replace your uPVC handles for windows as they may not be able to operate the window correctly in the future.
There are a variety of uPVC handles to choose from, including Espag, Cockspur and Spaded handle options. These handles are designed to fit in the uPVC frames in a variety of ways. Each handle uses a specific spindle to lock the mechanism into the window. It is important to identify the kind of handle that is installed on your uPVC windows to ensure that you replace it with the correct one.
You can find out what kind of uPVC handle you are using by looking at the base section of your handle. A snap-in cover should be over the screw that holds the handle's base in place. When you remove this cover and you'll be able to observe the second screw that holds the handle base in place. Once both screws are removed you should be in a position to pull the handle away from the uPVC window.
After taking off the uPVC handle, carefully unscrew it from the locking mechanism. Take note of the length of the spindle. You will need to purchase a replacement with the same length as the original handle and the locking device.
The most common issue with uPVC window handle problems is that the handle spindle gets worn out and can no longer work with the locking mechanism. This could be due to corrosion, damage caused by constant use or the locking mechanism becoming looser. When this happens it will be necessary to replace the window handle and locking mechanism to restore full functionality to your uPVC windows.
How do I take off the handle from the previous one?
In the course of time and daily use, window handles may be damaged or destroyed, and if this happens, it is crucial to repair them as soon as you can to ensure the safety of your home. It is simple to replace a worn or damaged handle. The job can be accomplished in under one minute without the need for any special tools.
The first step to remove the old handle is to take off the screw situated on the top of the handle base. Once the screw is removed, the handle can be pulled away. A second screw is situated at the base of the handle. This too can be removed. When both screws are removed the handle can be removed from the base section of the window.
After removing the old handle and align the fixing holes of the new handle with the holes already present in the window frame. There may be a tiny cap or sticker on the new handle, so remove these if necessary and then screw the handle into place. Once the handle is in place, it is crucial to verify that it is working by turning the handle, and ensuring that the lock mechanism is activated.
Espag handles have a spindle which protrudes out of the handle and slot into the multipoint locking mechanism on the window frame. Cadenza windows come with a blade with cutouts that are incorporated into the lock mechanism. Cockspur handles are long and are hung over the frame of the window or the transom crossmember of the bar.
Once you have the new handle in place, slide the spindle inside the lock inside the window and then tighten it down. Replace the snap-in cover and screw cap (if applicable) after the handle is securely fixed. The handle is now ready to use by opening and closing the window a few times to check that it is working well and securely.
How do I put in the new handle?
It's not difficult to alter the handle on your windows made of uPVC. The procedure is simple. You only need a screwdriver, and a little bit of patience. The first step is ensure that the handle you have previously used is in the unlocked position and then take out any screws that are visible, you can replace them with screw caps if needed. After removing the handle, you will need to note the length of the spindle which extends from the back. This is vital as it will determine what kind of handle you will need to buy.
Espagnolette handles on uPVC are the most popular kind of handle. The spindle runs through the handle to control the locking mechanism in the window frame. Once the handle is turned it releases the latch on the window and allows it to open. With time and regular use, espagnolette handles can be damaged or destroyed and it is necessary to locate a replacement.
Cadenza handles are a type of uPVC handle that is typically used in tilt and turn windows. They have a protruding knife that works with a multiple-point locking mechanism inside the window. They are more secure than an espagnolette handles because they are able to open from the inside. They can be replaced by the same procedure as espagnolette handles, however you should ensure that the new handle has a curved blade, as opposed to one that is flat.
Once you have selected the correct handle, you can align the new handle to existing screw holes before screwing it in place. Then,
UPVC Window Handle Replacement put the screws on and test the new handle.
