replacement upvc window handles (
More suggestions)
Almost all replacement
window pane replacement handles made of upvc come with everything you need, however if the previous handle had screws or pins that held it in place, they are required to be removed. Take off the "snap-in" cover at the base of your handle.
Next you will need to determine the type of window and lock that your new handle This is vital!
Espag
Espag handles are a multipoint lock that is fitted to casement windows like uPVC and double glazing made of wood. The handle is fitted with a 7mm square shaft that fits into an internal gearbox that is mounted on the uPVC window. When the handle is turned it triggers a series of locks around the perimeter of the window. Espag handles, also known as shootbolts, offer more security than the single point lock that is found on older window frames.
They are available in a variety of different designs, including inline and cranked handle designs that can be used either left or right-hand operation. You can also find a variety of ergonomically designed handles that are designed to enhance both the feel of the handle and how it looks on your windows.
You will need to measure the size of the spindle from base of your uPVC handle in order to purchase the right replacement. This measurement, also known as the step height, will assist you in selecting the ideal uPVC window handle for your home.
If you need to remove screws that are holding the handle, use a screwdriver or pliers. After you have removed the screws or pins that secure the spindle you can take it apart to disassemble the handle.
After removing the handle you will be able to access the locking mechanism within the frame of the windows. You can then remove the cockspur block that is connected to the handle. This will allow the window to be opened. The replacement uPVC window handles that you've purchased will now be able to fit onto the wedge block of the cockspur and then into the spindle of the handle, allowing the window to be opened again. Ideally, you should replace the cockspur wedge block with a new one whenever you replace your uPVC handle to ensure it is securely secured.
Cockspur
Cockspur handles are found on older uPVC or aluminum windows. The handle closes and turns onto a wedge-shaped plastic receiver catch. (Not to be confused with timber latches which are also covered in this section.) They can be locked or nonlockable. They come in a range of different nose heights to fit the existing frame.
The handle is locked by a small triangle-shaped spur (spur) that is attached to the frame. These are usually single-way handles, however a deadlock with a locking mechanism can be added to give additional security.
As with Espag handles cockspur handle replacements are simple to install All you require is a new set of screws (supplied) and the correct backset. The backset is the distance that runs from the baseplate of the window to the underside of the handle's nose. Aluminium window frames are generally 9mm wide, while UPVC is 21mm wide. There are a myriad of variations though so it is important to measure before buying the handle (see video below for how).
The spindle, or in some instances the entire handle assembly is removed by unwinding the handle. The replacement handle is then fixed with a pair of pozidrivs screws. The pozidriv screws are available in a brass or zinc finish to match the hardware and there is also the possibility of a self-locking version.
This is a simple to install replacement for the cockspur handle that is perfect for fixing or replacing old uPVC windows. They feature an universal design that makes them suitable for a variety of profiles and backsets. Each handle is equipped with three packers, each of different thicknesses. They are installed on the underside of handle noses and can be stacked to create backsets as small as 9mm or as large 21mm. They are available in right and left handed models and are available in either lockable or nonlockable models with a range of nose heights.
Tilt and Turn
The premium European window style with tilt and turn has been popular in Europe for
Replacement Upvc Window Handles decades, but it is only now starting to take off in the United States. They combine the advantages of three different window types into one - tilt, pivot and in-swing. This makes them perfect for older homes as they can be used to offer more ventilation than traditional window types.
When closed tilt and turn windows lock like the normal fixed window. By turning the handle either 90or 180 degrees depending on the type of tilt-and turn window, the sash will open inwards and the window tilts inward to allow air exchange. This is a great option to allow ventilation without having to open a large window, which can be a safety risk if not properly secured when opening.
If the handle is turned 90@ or 180@ the sash will be fully opened, much like a door. This allows full air exchange, which is particularly useful in draughty rooms or homes where smoke and other odors can build up. It also makes cleaning the exterior of the glass much more easy because it can be done from inside the house - a task that often requires ladders that are a bit shaky.
Tilt-and turn windows are also safe. When locked in a closed position they are difficult to open from outside, and they have double seals that stop rainwater from getting into the home when in the tilted in-swing position. This feature is particularly beneficial for older homes where intruders tend to target traditional windows that can be opened by the side hinges.
Spade
There are many types of window handles that can be fitted to double-glazed windows made of upvc. The two most popular types are Espag handles and Cockspur handles. There's also tilt and turn handles, spade or blade handles and monkey tail handles. The type of handle that you pick will be based on your preferences as well as the kind of windows you have.
You must know how your current handle is attached to the frame in order to choose the right replacement upvc handle. This is known as handing, and is a vital aspect to consider when purchasing online. Certain handle styles are not suitable for all windows. For instance, certain handles for cockspurs are angled, whilst others are straight and either turn left or right. It is also important to be aware of what the spindle length is, which is the distance from the base of the handle to the tip of the handle.
Identifying if your windows require a restrictor is also crucial when selecting the right handle. They are typically used in high-rise apartments or commercial buildings, but they aren't a requirement for the majority of homes. Also, you should be aware of the step height which is the distance between the screw plate and the apex of the handle.
Spade is the word from Old English spadu or
Replacement Upvc Window Handles spaedu and has been translated into various languages including German spaten and Low German Spathen. In the 1920s during the Harlem Renaissance in New York City spade started to be used as a derogatory term for black people. The word has since risen to prominence in pop culture and is now a well-known symbol of African American heritage and pride.
When replacing the handle of a Cadenza handle, it's crucial that you choose the right size. The handles are available in straight and angled designs that differ by only a few millimetres. The handle head is available in a variety shapes such as a D or T shape. It is also possible to be left unhandled.