How to Replace a UPVC Window Handle
Don't be worried when your upvc handle has become broken. Replacing a window handle made of upvc is an easy task and can be completed in a matter of a few steps.
Whether you have a cranked or
Replace Upvc window handle in-line espagnolette type of window handle, all of them come with a square spindle bar that extends from the back plate and is slotted into the locking mechanism.
Find out the lock type and handle
Over time window handles or locks may get damaged and lose function. The good thing is that this can usually be fixed without having to replace the entire window unit made of uPVC. The first thing you need to do is to identify the type and size of your handle and lock. This will allow you to determine the
replacement window handle parts that you require.
Identifying the kind of handle is done by looking at the base of the handle. There will be the screw or pin that is holding the handle to its base. If the screw is missing it could be a sign that the handle has broken off from its base. If the handle has broken internally and no longer grips onto the spindle, this can also indicate that it needs replacement.
There are a number of different types of uPVC window handles The most well-known is the Espag handle. They are usually fixed with two bolts and the spindle is connected to the locking mechanism within the window frame. These handles are usually used on uPVC tilt and turn windows.
Another kind of uPVC window handle is the Cockspur handle. These are similar to the Espag handle, however they have a low projection from the frame. These handles are generally used on older uPVC window frames.
Venetian window handles are another alternative. They are similar to Espag handles, but have a flat bottom which allows them to be positioned in a flush position with the frame. They are an excellent choice for homeowners looking for a stylish, elegant handle that blends with their uPVC window frames. The handles are also available in a broad range of colours to match any decor.
Find the spindle's measurement.
Before purchasing a new handle, it's important to understand how the previous one is attached. This will help determine whether it's too tight or loose and if it will fit inside the window frame. This can be accomplished by identifying the handle type and determining the spindle's measurement. The spindle is the metal shaft that connects the handle to the lock within the window frame. The spindle is available in a variety of sizes. The current standard for the industry is 8mm. Older handles may have a cross-section of 9mm, so you'll need to measure your old handle to make sure you get the correct size replacement.
There are many types of window handles. The most commonly used are the inline Espagnolette handles and the cockspur handles. These handles operate a locking system inside the window. They employ shootbolt rods that secure the window once it is closed. They are secured by screws or pins depending on the type of handle you have.
You can buy Upvc handles that are replacement on the internet or at most DIY stores. They are available in a variety of finishes, and can be used to make windows that are new or replacement. For extra security they can be key-locking or a non-locking fire escape.
To take off your old handle, open the window and unscrew the screws which hold it in place. Be careful not to cause damage to the screws and place them in a container for future use. After the screws are removed, carefully remove the handle and measure from the base to the tip of the spindle. This will provide you with the information you need to buy the right replacement. The handle's spindle is the shaft made of metal that connects it to the lock gearbox inside the window frame.
Take off the handle from the old one.
The replacement of the handle of a uPVC window handle is an easy task and usually will take less than five minutes if you have the appropriate tools. The first thing you need to determine is the type and size of the lock or handle. This will allow you to determine the best replacement. You can then measure the spindle to make sure that the handle will fit. Finally, you'll need to remove the old handle and
replace Upvc window Handle it with the new one.
The majority of uPVC handles come with inline Espagnolette handles. They have central spindles that slot into the locking mechanism on the window. They are generally simple to take off, but you may have to apply force when they're stuck. The handle is typically held in place by two screws that you can remove using a screwdriver. It is also possible to remove pins, depending on the type of handle.
After the screws have been removed Once the screws are removed, you can remove the handle. The top of the base plate will be visible when the handle is in an open position, revealing two screws that you can remove. If the sticker remains visible, you'll have to take it off.
With the screws that came off the handle, you are now able to screw the new handle into place. Make sure the handle is in the open or locked position, then align the screw holes with the ones on the window. After you've done this then replace the cap screws. Test the new handle. Changing a uPVC window can be a quick and simple task, but you need to take the time to complete the task correctly.
Fit the new handle
It's time to put in your new handle if you've successfully removed the old handle from the frame. Start by locating and removing the screw covers with your screwdriver. Once they are removed, put them in a safe place and move on to the next step.
Then screw the spindle into by aligning it with the hole. Make sure that the holes in the handle with the holes in the window frame. Make use of a screw of the same size as the previous one.
The uPVC Espag handle comes equipped with a spindle of 7mm square that turns the lock mechanism on the window. This handle style is used in most modern uPVC windows. uPVC Cockspur handles (also known as Cotswold handles) feature long noses that lock over the frame's outer or transom bar cross member and are often found in older uPVC windows.
It's important to lock and unlock the window a few times after the handle has been installed. If all goes according to plan, the new uPVC handle should be properly attached and running smoothly. If not, the steps above will allow you to identify any issues and resolve it quickly. If you're struggling with your uPVC handle or are experiencing other problems with your glazed home improvement do not hesitate to contact us at Bridgewater Glass for professional assistance. Our glaziers are able to repair or replace different window frames and handles. This makes us a great choice for double glazing.
Test the new handle
Over time, uPVC handles can be damaged and worn out. They can become less effective and secure and therefore it is important to replace them as quickly as possible. This is also a great option to consider when you upgrade your windows. Changing your lock mechanism and handle will help maintain the integrity of your new windows.
When it is to uPVC window handles, there are many different styles. Some are fixed to the frame with pins or screws, while others feature blades that fit into the lock mechanism. Each type has its own method of replacement, and it's important to know what type you have before you start working on it.
Espag window handles are the most popular kind, and are typically used on newer uPVC windows. The spindle extends from the handle into the lock gearbox, and it activates the locking system when you open the window. They are also simple to take off. However, you must be careful not to harm either the mechanism or the handle.
Cockspur window handles are a popular choice for uPVC windows.