Replacement Upvc Window HandlesThe majority of
replacement windows handles made of upvc include everything you need. However the handle you had previously was fixed by pins or screws, they will need to removed. Next remove the'snap in' cover on the base of the handle.
You'll need to identify what type of window lock and handle you're replacing. This is vital!
Espag
Espag handles are a multipoint lock system that is installed on casement windows such as uPVC and
Replacement Upvc Window Handles wooden double glazing. The handle is fitted with a 7mm square shaft that fits inside an internal gearbox that is mounted on the uPVC window. When the handle is turned, it activates a series locks around the perimeter of the window. Espag handles, also referred as shootbolts, provide more security than the single point locks found on older window frames.
They are available in a range of different options such as inline and cranked designs that can be used for either left or right-hand operation. You can also find ergonomic handles that improve the appearance and feel of your window as well as handles.
You will need to measure the size of the spindle from base of your uPVC handle in order to purchase the correct replacement. This measurement is referred to as step height. It will aid you in finding the perfect uPVC handle for your home.
If you have to remove any screws that secure the handle, use pliers or a screwdriver. After this is done then you need to take the handle apart by taking out the screws or pins that secure the spindle and then taking it away from the window.
After removing the handle, you can open the locking mechanism in the frame of the windows. You can then remove the cockspur block that is attached adjacent to the handle. This will allow the window to be opened. The replacement uPVC window handles you have purchased should be able to fit on the wedge block of the cockspur and then into the spindle of the handle and allow the window to open once again. The ideal solution is to
replace upvc window handle the wedge block cockspur with an entirely new one when you change your uPVC handle to ensure that it is properly secured.
Cockspur
Cockspur handles can be found on older uPVC or aluminium windows. The handle closes and turns into a wedge-shaped plastic catch. (Not to be confused with timber latches which are also covered in this section.) These handles are available in lockable and nonlockable models. They are available in a variety of different nose sizes to match the existing frame.
The handle is locked by small triangle-shaped spur (spur) that is attached to the frame. They are typically one-way handles however a locking deadlock cylinder can be fitted for additional security.
The replacement handles for cockspurs are easy to install. All you need is the correct backset as well as a new set (supplied). The backset is the distance from the baseplate of the window to the underside of the handle's nose. As a general rule Aluminium window frames usually have a 9mm backset, while UPVC employs 21mm. There are a myriad of variations however it is essential to take a measurement before purchasing the handle (see the video below for more details on how).
This type of window handle can be changed by simply unscrewing the existing handle and taking off the spindle, or in some cases, the entire handle. The new handle is screwed in place with a pair of pozidrivs screws. The pozidriv screw can be purchased in a brass or zinc finish to match the existing hardware. There is also a choice for self-locking pozidriv screws.
This is an easy to install replacement for the cockspur handle that is perfect for fixing or replacing old uPVC windows. They have a universal design, making them suitable for a variety of profiles and backsets. Each handle is supplied with 3 packers that vary in thickness, these are neatly attached to the underside of the handle nose and can be used in a variety of ways to get backsets of 9-13mm 17mm, 21mm and. They are available in left and right handed versions, and are available in nonlockable or lockable models, with a variety of nose heights.
Turn and Tilt
Tilt and turn windows are a coveted European window style that has been used for decades in Europe but is beginning to gain traction stateside. The windows combine the functionality of 3 window styles - tilt, in-swing, and pivot. They are great for older homes as they provide more ventilation than standard windows.
When in the closed position, tilt and turn windows lock like the normal fixed window. By turning the handle 90@ or 180@ (depending on the kind of tilt and turn window) the window sash will open inwards and the window will be tilted into allowing air to circulate through the gap at the top of the frame. This is a great way to allow air circulation without opening a large, potentially dangerous window.
The sash is also able to be opened fully by turning the handle 90@ or 180@. This allows full air circulation, which is particularly beneficial in rooms with a lot of draft or houses where smoke or other odors are likely to accumulate. It also makes cleaning the outside of the glass much easier because it can be done from inside the house - a task that often requires ladders that are not safe.
Tilt and turn windows are also extremely secure. They are difficult to open if they are locked in the closed position. They also feature double seals that stop rainwater from entering your home while it is in the tilted position, or in swing. This feature is particularly beneficial for older homes, where burglars tend to target traditional windows which can be opened using side hinges.
Spade
There are a variety of handles that can be put in on windows with double-glazed upvc. The two main kinds are Espag handles and Cockspur handles. There are also tilt and turn handles blade or spade handles and monkey tail handles. The type of handle you select will depend on your preferences as well as the type of windows you have.
To choose the right replacement upvc window handle, it is important to know how your existing handle is fixed to the frame. This is referred to as handing and is a crucial piece of information to know when buying online. Some handle designs do not fit all windows. Some handles, for instance, are angled whereas others are straight, and can turn left or right. You should also be aware of what the spindle length is that is the distance from the base of the handle to the head of the handle.
Another crucial aspect of selecting the right handle is knowing whether your windows need a restrictor or not. They are usually used in high-rise flats or commercial buildings, but are not required for homes used by the homeowner. Also, consider step height which is the distance from the top of the screw plate to the top of the handle.
Spade comes from Old English spadu, spaedu or spada and has been translated into numerous languages, including German spaten and Low German spathen. In the 1920s during the Harlem Renaissance in New York City, spade began to be used as a derogatory term for black people. Since the time spade has become an emblem of African American pride and heritage.
When replacing a Cadenza style handle, it is essential that you get the right size. The handles are available in straight and angled designs that differ by just a few millimetres. The handle head is available in a variety of shapes, including a D or T shape. It can also be left unhandled.