How to Replace a UPVC Window Handle
Don't be concerned if your upvc handle is broken. Replacing a upvc window handle is a fairly simple job and can be completed in a matter of a few steps.
Whether you have a cranked or inline espagnolette style window handle, all of them have a square spindle bar that extends from the back plate and is slotted into the locking mechanism.
Determine the type and size of the handle and lock.
Over time, window handles and locks can get damaged or lose function. It is possible to repair this issue without replacing the entire uPVC unit. The first thing to do is identify the kind and size of your handle and lock. This will help you identify the replacement parts that you require.
Identifying the kind of handle can be identified by looking at the handle's base. A screw or pin is what holds the handle to its base. If the screw is gone it could be a sign the handle has split from the base section. If the handle is broken internally and doesn't hold onto the spindle anymore it could be an indication that the handle needs to be replaced.
There are a variety of different types of uPVC window handles, but the most common is the Espag handle. They are typically fixed using two bolts, and the spindle engages the locking mechanism of the window frame. These handles are usually used on tilt and turn uPVC windows.
Another kind of uPVC window handle is the Cockspur handle. These are similar to the Espag handle, but they are a little further from the frame. These handles are generally used on older uPVC window frames.
Venetian window handles are another option. They are similar to Espag handles, but they have an elongated bottom that lets them to be installed flush with the frame. They are a great option for homeowners looking for a stylish, elegant handle that blends with their uPVC window frames. These handles are also available in a large range of colours to match any style.
Find the spindle's measurement.
Before you purchase a new handle, it's important to understand how the previous one is connected. This will determine how it is tight or loose and whether it will fit properly into the window frame. It is done by identifying what kind of handle you own and determining the length of the spindle. The spindle is a steel shaft that connects your handle to the lock in the window frame. The spindle is available in various sizes. The current industry standard is 8mm. Older handles could have 9mm of cross-section, so you'll have to measure your old handle to make sure you get the correct size replacement.
There are a variety of window handles, however the most commonly used are inline Espagnolette and cockspur handles. These handles are operated by with a locking mechanism inside the window, using shootbolt rods which secure the window when it is closed. They are secured by pins or screws depending on the type of handle you have.
You can buy Upvc handles that are replacement on the internet or at most DIY stores. They are available in a variety of finishes, and can be used for new or
replacement windows. They can also be key-locking or non-locking to provide additional security.
To remove the handle simply open the window and unscrew the screws that secure it. Store the screws in a container to prevent damage. After the screws are removed, carefully remove the handle and measure from the base to the top of the spindle. This will provide you with the information you need to buy the right replacement. The spindle of the handle is the metal shaft that connects it to the lock gearbox in the window frame.
Remove the handle that was previously used
Switching the handle of an
upvc replacement window handles handle is a simple task that takes less than five minutes, if you have the appropriate tools. The first step is to determine the lock type and handle, which will help you determine the best replacement. After that, weighing the spindle will make sure that the new handle is a good fit. The old handle needs to be removed and replaced with the new one.
The majority of uPVC handles are inline Espagnolette handles, which have a central spindle that slots into the locking mechanism of the window. They are generally simple to remove, but they might require force if get stuck. The handle is typically held in place by two screws that you can remove with the aid of a screwdriver. Depending on the kind of handle, you might be required to take out the pins that hold it in the position.
After the screws have been removed After that, you can take off the handle that was previously attached. When the handle is opened, the top of the baseplate should be visible. This will reveal two more screws that can be unscrewed. There's also a small silver or other colour sticker that has to be removed if in place.
You can now put in the new handle using the screws that came with the old handle. The screw holes should be aligned on the window with the holes in the handle. Once you've completed this then replace the caps on the screws. Test the new handle. It's simple to replace a uPVC handle, but you must do it correctly.
Replace the handle with a new one.
If you've been able to successfully remove the handle that you have on the frame, it's time to fit the new handle. Start by locating and removing the screw covers using your screwdriver. Once the screw covers have been removed, store them in a safe place before moving on to the next step.
Next, place the new spindle inside the handle by aligning it with the hole in the handle and screwing it in. Align the holes on the handle with those in the window frame. Use a screw of the same size as the previous.
uPVC Espag handles come with a square 7mm spindle that turns the lock mechanism attached to the window. This handle style is used in the majority of modern uPVC windows. uPVC Cockspur handles (also known as Cotswold handles) come with an extended nose that locks over the outer frame or transom bar cross member. They are often found in older uPVC windows.
Once the new handle has been put installed, it is important to test that it works properly by locking and unlocking the window several times. If everything is in order then your new uPVC window handle should now be properly attached and running smoothly. If you are experiencing any issues,
replacement windows these steps will help you identify the issue and fix it quickly. Bridgewater Glass can help you in the event of problems with your uPVC handles or other home improvement that is glazed. Our glaziers have been trained to repair or replace various window handles and frames which makes us a great option for your double glazing requirements.
Test the new handle
Over time and through normal use, uPVC handles and locks are susceptible to damage and wear and wear and tear. It can make them less secure and efficient which is why it's important to replace them right away. It's also a good idea to do this after you upgrade your windows,
replacement windows because changing your lock and handle will ensure the security of your new windows.
There are a variety of styles of uPVC window handles. Some are secured with pins or screws, whereas others have blades that slot into the lock mechanism. Each type has its own method of replacement, therefore it's crucial to know what kind you've got before you begin working on it.
The most common kind of window handle is the espag. They're usually found on the latest uPVC Windows. These handles come with spindles that extend from the handle and into the lock gearbox and when you open the window it triggers the locking mechanism. They're also easy to remove however, you must take care not to damage the mechanism or the handle when doing so.
Cockspur window handles are another popular option for uPVC windows. They're secured with a spur that hooks onto the striker plate in the shape of a wedge on the frame.
