UPVC Window Handle Replacement
Replacing a damaged or broken window handle is a relatively simple process and with the right tools it can be done quickly. It's important to know what kind of handle you have and its spindle size before you purchase a replacement.
Older uPVC windows have handles with cockspurs, which have an extension spur that can lock over a cockspur wedge striker plate. They can be left- or right-handed and must match when replaced.
What kind of lock or handle do I have?
There are many upvc window locks and handles each with their distinct advantages and functions. The type of handle that you have will determine whether or not your locking mechanism is efficient and if it is easy to open windows. With time and regular use, the upvc handles on your windows can become damaged and worn out. This makes them less secure and effective. In some cases, they may even disappear completely. It is crucial to fix your upvc window handles immediately if you begin to notice they are falling off. This will help prevent potential break-ins and protect your home from burglary.
It's a task that anyone can complete. With a few basic tools and the right information, this is a simple procedure that should take no more than a couple minutes. To get started, you will need to identify the type of lock and handle that you have on your window, which will help you to find the ideal replacement.
Inline Espagnolette Handles
They are typically found on the outside of the window. They are flat and come with an open latch that is connected to the locking mechanism of the window frame. Inline upvc handles have a spindle that runs through the center of the handle and into the window frame to operate the latch.
Cockspur Handles
These handles are typically located on older uPVC windows and have an distinctive hook-shaped design. Cockspur handles are attached to the frame of the window by a single screw and are less secure than other varieties of window handles.
Handles that can tilt and
UPVC Window Handle Replacement turn
The tilt and turn handles differ from other upvc handles because they can be turned for opening the window, and then lowered to the window to let air circulate. They feature a 7mm spindle in the back and are available in right and left-handed versions.
It is crucial to determine the spindle size when buying replacement upvc handle. Not all of them are the exact same size. Drop something in the middle of the hole to check the length. This is the length of the spindle that will fit in your window.
What is spindles?
uPVC window handles operate in a similar manner like doors. By turning the handle, you will be able to operate a latch within the frame. This opens the window so it can be shut and opened. But, at times, these handles can become damaged, especially if they are regularly used or exposed to extreme weather conditions. It is possible to replace the handles on your uPVC
window glass replacement near me if they are not functioning correctly.
There are many types of uPVC handle options, including Espag, Cockspur, and Spaded handles. These handles are designed in a variety of ways to fit into uPVC frames. Each handle style uses an individual spindle to lock the window mechanism. This is why it is essential to know what type of handle you have on your uPVC window to get the correct replacement.
You can determine the type of uPVC handle you are using by taking a look at the base of your handle. There should be a "snap-in' cover over one screw that holds the handle base in place. Remove this and then you should be able see the second holding screw on the opposite side of the base section of the handle. After both screws are removed you should be able to pull the handle away from the uPVC window.
After you have removed the uPVC window handle, you will need to remove the spindle that was previously attached to the locking mechanism. Make note of the length of the spindle as you will need to ensure that you buy a replacement that has the same length as your original handle and locking mechanism.
The primary issue with window handle problems with uPVC is that the spindle becomes worn-out and is unable to longer function properly with the locking mechanism. This could be due damage caused by constant use or a loosening of the locking mechanism, or even corrosion that occurs over time. If this happens, you'll need to replace both the window handle and the locking mechanism to restore the full functionality of your uPVC Windows.
How do I remove my old handle?
Through time and regular usage, window handles could become damaged or broken, and when this happens, it is important to repair them as soon as possible to ensure the safety of your home. It is simple to replace a worn or damaged handle. The job can be completed in less than an hour without the need of special tools.
The first step in removing the old handle is to remove the screw that is located on the top of the base of the handle. Once the screw is removed, the handle will be removed from the base section. Another screw will be located at the base of the handle. This too can be removed. After both screws are removed, the handle can be removed from the base section of the window.
After removing the old handle and align the fixing holes of the new handle with the existing holes in the window frame. There may be a little sticker or caps on the new handle, so take off the caps if needed, and then put the handle in the frame. It is essential to ensure that the handle works once it is installed. Turn the handle and make sure the lock mechanism is working.
Espag handles come with an extra spindle that is protruding from the handle and slot into a multipoint locking mechanism in the window frame. Cadenza windows feature a blade with cutouts that fit into the lock mechanism. Cockspur handles are long and hook over the frame that surrounds the window or the transom crossmember of the bar.
Once you have the new handle in place, you can insert the spindle inside the lock in the window and then tighten it. Replace the snap-in cover and screw cap (if necessary) after the handle has been firmly fixed. The handle is now ready for use to use, so try opening and closing the window a few times to ensure that it works correctly and securely.
How do I install the new handle?
The process of changing your window handle made of uPVC isn't a big deal and the process is simple. All you need is a screwdriver, and a little bit of patience. The first thing you need to do is to ensure that the handle is locked and then remove any screws that are visible. you can also replace these with screw caps if needed. After you have removed the handle, you will need to note the length of the spindle which extends from the back. This is crucial because it will determine the kind of handle to purchase.
Espagnolette handles on uPVC are the most sought-after kind of handle. They have a spindle which is inserted into the handle, and is responsible for a locking mechanism inside the window frame. The handle opens the latch, allowing the window to open. With time and regular use, espagnolette handles can be damaged or destroyed which is why it is essential to locate a replacement.
Cadenza handles are a type of uPVC handle that is commonly used in tilt and turn windows. They have a protruding blade that operates a multipoint locking mechanism within the window. They are generally more secure than handles made of espagnolette because they can only be opened from the inside. They can be replaced by the same procedure as espagnolette handles, however you should ensure that the new handle has a curved blade, as opposed to one that is flat.
Once you have decided on the correct handle to purchase then you can place the new handle with the existing screw holes, and then screw it into the appropriate position.