UPVC
Window Handle ReplacementIt's simple to repair a broken window handle with the proper tools. It is important to identify the kind of handle you have and its spindle size before purchasing the replacement.
Older uPVC windows have handles with cockspurs, which have an extension spur that can the lock of a wedge cockspur striker plate. These can be left- or right-handed, and must be compatible when replaced.
What type of lock or handle do I have
There are a variety of window handles made of upvc and locks, each with their own benefits and purposes. The kind of handle you choose will determine the ease to open your windows and if the locking mechanism works in the way you want it to. Over time, and with regular use the upvc handles that are on your windows could become damaged and worn out. This makes them less secure and less effective. In some instances, they could even fall completely off. It is important to repair the handles on your window made of upvc immediately if you notice them falling off. This will prevent potential break-ins and keep your home safe.
It's an easy task that anyone can complete. You'll need a few basic tools, but with the right knowledge, it is an easy task that will only take a few minutes. You must know the kind of lock or handle you have on your window. This will help you choose the right replacement.
Inline Espagnolette Handles
They are typically located on the outside of the window. They are flat and come with an open latch that is connected to the locking mechanism of the window frame. Inline upvc handles feature a spindle that runs through the middle of the handle and into the window frame to operate the latch.
Cockspur Handles
These handles are usually found on older uPVC window frames and have distinct hook-shaped designs. Cockspur handles are fitted with a single screw that secures the handle to the frame and aren't as secure as other kinds of window handles.
Handles that tilt and turn
As opposed to the other handles made of upvc the tilt and turn handles can be turned to open the window and turned inwards to allow to allow ventilation. They feature a 7mm spindle on the back and are available both in left and right-handed versions.
It is important to measure the spindle size when buying new upvc handles. Not all of them are the exact same size. To test the length of your handle made of upvc, simply drop something into the middle of the hole and then measure the distance it travels before meeting an obstruction. This is the largest spindle size that will fit in your windows.
What is the spindle?
uPVC window handles work similar as doors, with the user turning the handle to activate an internal latch within the frame. The window can then be opened and shut. The handles could be damaged,
Window Handle Replacement especially if often used or are subjected to harsh conditions. It is possible to replace the handles on your uPVC
window replacement if they are not functioning properly.
There are a variety of uPVC handles, including Espag, Cockspur, and Spaded handles. These handles are designed in a variety of ways to fit into uPVC frames. Each handle type uses an individual spindle to lock the window mechanism. It is important to identify the type of handle installed on your uPVC windows to ensure that you replace it with the right one.
You can find out what kind of uPVC handle you have by inspecting the base of your handle. A snap-in cover is over the screw that holds the base of the handle in position. After removing this you will be able to see the screw that holds the base of the handle in place. After both screws have been removed, you should be able to pull the handle away from the uPVC window.
Once you have removed the uPVC window handle, you will need to remove the old spindle from the locking mechanism. Take note of the length of the spindle. You'll need buy a replacement of the same length as the original handle and the locking device.
The most common issue with window handles made of uPVC is that the spindle gets worn out and cannot longer operate the locking mechanism. This could be due to damage from constant use or a loosening of the locking mechanism or even corrosion over time. If this happens, you will need to replace both the window handle and the locking mechanism in order to restore the full functionality of your uPVC Windows.
How do I take off the handle that was previously attached?
Over time and through everyday usage, window handles could become damaged or broken, and when this happens, it is important to repair them as soon as possible to ensure the safety of your home. It is good to know that replacing a damaged or worn handle is a easy task that can be completed in just over an hour and doesn't require any special tools.
The first step in removing the old handle is to take off the screw located on the top of the base of the handle. After this screw is removed, the handle can be removed from the base. A second screw is situated at the base of the handle. This too can be removed. After these two screws are removed, the handle can be removed from the window's base.
After removing the old handle, align the fixing holes of the new handle with the existing holes in the window frame. There may be a tiny cap or sticker on the new handle, so remove them if needed and then put the handle in its place. Once the handle is in place, it is crucial to verify whether it functions by turning the handle and making sure that the lock mechanism is activated.
Espag handles come with a spindle that protrudes from the handle and slot into a multipoint locking mechanism in the window frame. Cadenza windows come with blades with cut-outs that slot into the lock mechanism, while Cockspur handles have a long nose that hooks over the frame's outer or transom bar cross member within the window.
Once you have the new handle in place, slide the spindle into the window lock and then tighten it. Replace the snap-in cover and screw cap (if necessary) after the handle is fixed. Once the handle is ready for use, open and close the window a couple of times to make sure that it functions properly and securely.
How do I install the new handle?
It's not difficult to change the handle on your windows made of uPVC. The process is very easy. You only need a screwdriver, and a bit of perseverance. First, ensure that the handle that you are replacing is unlocked. Then, remove any visible screws. You can also replace them with screw caps. After the handle has been removed and you are ready to take an outline of the length of the spindle that extends from the back of the handle. This is important as it will determine the kind of handle you'll require to purchase.
Espagnolette handles that are made of uPVC are the most sought-after type of handle. They have a spindle which runs through the handle and acts as an internal locking mechanism within the frame of the window. The handle releases the latch, allowing the window to open. During regular use and time, handles made of espagnolette can become damaged.
Cadenza handles are a kind of uPVC handle that is usually used in tilt and turn windows. They have a protruding knife that works with a multiple-point locking mechanism within the window. They are generally more secure than espagnolette handles as they are only accessible from the inside. They can be replaced using the same method as espagnolette handles but you should make sure that the new handle has an angled blade, as opposed to flat ones.
Once you have selected the correct handle, simply align the new handle to existing screw holes before fixing it with screws. Then, you should put the screws on and test the new handle. This is accomplished by moving the handle from the locked to the unlocked position and then back to the locked position several times.