UPVC Window Handle Replacement
It is easy to repair a broken
window replacement near me handle with the proper tools. However, it is essential to know the handle's type and spindle's length prior to purchasing the replacement.
Older uPVC windows use cockspur window handles which have a spur that protrudes to the lock of a wedge cockspur striker plate. They can be right-handed or left-handed and must be compatible when replaced.
What type of lock or handle do you have? I have?
There are many kinds of window handles made of upvc and locks, each with their distinct advantages and functions. The type of handle that you have will determine whether or not your locking mechanism is efficient and also if it is simple to open the windows. Over time and through regular usage, the window handles made of upvc can become damaged or worn out, making them less effective and secure. In some cases they could even disappear completely. If you find that your window handles have fallen off, it's crucial to fix them as soon as possible. This will help to prevent potential break-ins and ensure your home is secure.
The good news is that replacing your window handles made of plastic is a simple task that can be done by almost anyone. You'll need a few basic tools, but with the right knowledge, it is an easy task that will only take a couple of minutes. To get started you'll need to identify the type of handle and lock you have on your window to help you identify the best replacement.
Inline Espagnolette Handles
They are the most popular type of upvc handle and are usually located on the other side of your window. They are flat and feature a latch which engages the locking mechanism of the window frame. Inline upvc handles have an elongated spindle that runs through middle of the handle and into the window frame to operate the latch.
Cockspur Handles
They are usually found on older uPVC windows and feature distinct hook-shaped designs. Cockspur handles have one screw that holds the handle to the window frame and aren't as secure as other types of window handles.
Handles that turn and tilt
As opposed to the other handles made of upvc that are tilt and turn, these handles can be turned to open the window and turned inwards to allow to allow ventilation. They typically feature a 7mm spindle on the side of the handle. They are available in both left and right handed versions.
When you are purchasing replacement handles for upvc it is essential to verify the length of the spindle because not all handles are the same size. To determine the length of your upvc handle simply drop something into the middle of the hole, and then measure the distance it travels before meeting an obstruction. This is the maximum spindle length that will be suitable for your window.
What is spindles?
uPVC window handles work in a similar manner to doors. By turning the handle, you can open a latch in the frame. This opens the window so it can be closed and opened. These handles can be damaged, especially if frequently used or exposed to harsh environments. You may have to replace the handles on your uPVC window if they are not able to operate it properly.
There are a variety of uPVC handles,
UPVC Window Handle Replacement including Espag, Cockspur, and Spaded handles. These handles are made in a variety of ways to fit into uPVC frames. Each handle type utilizes an entirely different spindle for locking the window mechanism. It is important to identify the type of handle you have installed on your uPVC windows to ensure that you replace it with a suitable one.
The base section of the handle will tell you what type of uPVC it is. There should be a'snap in cover' over one screw that holds the handle's base in place. When you remove this cover, you will be able see the second screw that holds the handle base in place. Once both screws are removed you should be capable of pulling the handle away from the uPVC window.
After removing the uPVC handle, carefully remove it from the locking mechanism. Note the length of the spindle. You'll need purchase a
double glazing replacement window with the same length as the handle that was originally used and locking device.
The spindle wears out and becomes inoperable with the locking mechanism. This could be due to damage from constant use or loosening of the locking mechanism or even corrosion that occurs over time. If this happens, you will need to replace both the window handle and the locking mechanism to restore the full functionality of your uPVC Windows.
How do I take off the old handle?
Window handles can be damaged or broken over time. It is important to fix them as soon as you can to ensure your security. The good news is that replacing a worn or damaged handle is a simple job that can be accomplished in just over an hour and doesn't require any specialist tools.
The first step in removing the old handle is to remove the screw situated at the top of the handle base. After this screw is removed, the handle can be removed from the base. There is another screw located at the bottom of the handle's base, and this can be removed too. Once these two screws have been removed, the handle can be removed from the base of the window.
After removing the handle, align the fixing holes of the new handle with the holes already present in the window frame. If there is a cap or sticker on the new handle, take it off it if required and screw the handle into the appropriate position. It is important to check that the handle is working after it has been installed. Turn the handle around and make sure that the lock mechanism is in place.
Espag handles have a spindle which protrudes from the handle and slot into the multipoint locking mechanism of the frame of the window. Cadenza windows feature a blade with cutouts that fit into the lock mechanism. Cockspur handles are long and hang over the frame of the window or the transom crossmember of the bar.
Once you have the new handle in place, slide the spindle inside the lock inside the window and then tighten it. Replace the snap-in cover and screw cap (if appropriate) after the handle has been firmly fixed. Now that the handle is in use, open and close the window a couple of times to make sure that it functions properly and securely.
How do I fit the new handle?
It's not difficult to alter the handle on your uPVC windows. The procedure is easy. All you need is a screwdriver and a small amount of patience. The first thing you need to do is ensure that the old handle is in the unlocked position and then take out any screws that are visible, you can also replace them by screw caps if you need. Once the handle is removed it is necessary to take an outline of the length of the spindle that extends from the back of the handle. This is important because it will determine the kind of handle to buy.
Espagnolette handles made of uPVC are the most well-known type of handle. They have a spindle which is connected to the handle, and is responsible for a locking mechanism inside the window frame. When the handle is turned it releases the latch on the window, allowing it to open. During regular use and time, handles made of espagnolette can be damaged.
Cadenza handles are a form of uPVC handle that is typically used with tilt and turn windows. They have an elongated blade that functions as the multipoint locking mechanism inside the window. They are more secure than espagnolette handles because they are able to open from the inside. They can be replaced by the same procedure as espagnolette handles, however you should ensure that the new handle has an angled blade, as opposed to a flat one.
Once you've decided on the right handle to purchase, you can simply line up the new handle with the existing screw holes and then screw it in the appropriate position. Then, you should put the screw covers on and test the new handle.