How to Replace a Kia Sportage Replacement Key
The key of many Kia models comes with the keyless entry feature built into. The key functions like a remote control and can be exchanged with an Kia dealer.
Key fobs might stop working due to a variety of reasons, including an empty coin battery, worn buttons, signal interference, water damage and a damaged receiver module. Here are some helpful tips to help you get your
kia replacement key fob sportage replacement key working for good.
How do you replace the remote key or the smart key?
No matter if your Kia is equipped with an intelligent key, remote key, push-to-start key, or a regular non-transponder steel key The battery inside these keys will eventually need replacing. This is especially in the event that your vehicle displays a message that indicates that the smart or remote key has a low battery.
It's a simple process. To replace the battery of the key fob, remove the mechanical key from the slit in the back of the key fob. Next, remove the cover. Inside the key fob will be a small screw that holds the battery in place. Remove the old battery by detaching the screw with the help of a small screwdriver. Then, insert the new one and close the slit in the key fob.
When the key fob is equipped with new batteries check it by pressing the lock and unlock buttons. If the doors unlock and lock as expected, then you're set! You can now use the
kia Picanto Key Fob's hands-free lock/unlock feature when your fingers are cold or you need to make errands in Brandon.
Note: Certain key fobs (transponder chip or smart keys) might require their programming completed. This requires a specific programming machine that only the dealer or automotive locksmith can access. Other keys (non transponder keys made of metal) don't require programming. If you're looking to reprogramme your key, you'll have to note the key code number on the tag for the key code.
How do you replace the battery?
If the
Kia key fob doesn't respond to pressing the lock/unlock button, it's likely that the battery is not fully charged. A low battery may also cause other issues like the check engine light coming on or delayed cranking of the engine. Fortunately, replacing the battery on the key fob is a relatively easy DIY project that requires just a few tools.
Be sure to turn off your vehicle and close all doors before you begin. Locate the small metal or plastic piece at the bottom of your key fob, and gently jiggle it until the metal key is released. You can then insert the key in the door handle of the driver to open your car.
To replace the key fob's battery, remove the cover from the back and use a plastic pry bar tool to loosen the latch that holds the black negative battery cable. Remove the old battery, and then align the new one to ensure that the "+" positive side faces you, and the "negative" negative side is facing the fob's metal electrical contacts. Push the new CR2032 battery straight into place and avoid excessive force to avoid bending or damaging the contacts of the metal.
Once the new battery is installed, turn the key fob off and then turn it on in the ignition repeatedly until the door locks cycle. You can then test the Kia's Key fob to ensure it's working as intended.
How do you replace the smart key?
There is a possibility of having a standard keyfob or a Smart Key, based on the model of Kia Sportage. The smart key features an embedded mechanical key blade while the standard keyfob does not. Both kinds of key fobs come with batteries inside that will eventually need to be replaced. This is a simple procedure that takes less than two minutes.
Be sure to turn off your Kia and be on a level and well-lit surface prior to you begin. Be aware that there are tiny pieces inside the fob that can be removed if not cautious.
The first step is to find the small release button on the back of the lower part of the fob. It could be a circular button or a rectangular slot. You can open the key fob by pressing the button.
Once you have the key fob opened and you are able to take out the old battery and replace it. The new battery is a C2032, and can be bought online or in your local auto parts shop. Once you're done, your key fob should allow you to lock the vehicle, unlock it, and then start your vehicle even if it's not running.
How do I replace a mechanical key
The Kia key fob is a wonderful convenience that allows us to lock and unlock our vehicle with the press of a button. Like all devices like a key fob, the Kia may have issues. There are solutions to address these issues and keep your key fobs running for a long time.
One of the most frequent problems is a weak or dead battery. The fob could be able to stop working altogether or to work intermittently. If this is the case, try replacing the battery with a fresh new one.
If this isn't enough to resolve the issue, try using a standard flat-head screwdriver to break open the casing of the fob's plastic. Be careful not damage any internal components or scratch the plastic. After the battery has been removed, replace it with a brand new one.
Close and open the door with the mechanical key. (Every Kia fob comes with a spare mechanical key which will fit into the slot). Test the key fob and make sure it is working properly. If the fob still isn't working, contact a locksmith or dealer to help resolve the issue. To avoid locking outs in the future, ensure you purchase an emergency key that can be able to work with all trunk and door cylinders.