Protect Your Pride And Joy With The Ghost Immobiliser
Secure your prized possessions against theft with the Ghost Immobiliser. It's discreet and does not require any additional key fobs.
The device utilizes buttons on your vehicle (steering wheels doors, door panels and the centre console) to generate a unique pin code sequence that can be modified up to 20 times. This allows your vehicle to begin.
Simple PIN code change process
Many homeowners are upgrading their security due to the increase in vehicle theft. There are a variety of security products that are available,
ghost immobiliser birmingham from tracking systems to alarms and immobilisers. However, not all of these are equally effective in protecting your car. While a tracking device can help you find your vehicle in the case of theft, it does not stop the crime from happening in the first instance. An immobiliser, on the contrary does exactly what it says on the tin: it disables your car's engine to prevent it from being started. The Autowatch Ghost is one of the most advanced options available, making it nearly impossible for thieves to steal your car.
The ghost device uses the buttons on your car to create an unique sequence that needs to be entered to allow the engine to start. This can be done using the window, heater or indicator stalk buttons. There is also a mobile application that can be used as an emergency PIN override, allowing the driver to operate their car without the need to use the button sequence. This feature is particularly beneficial if you have to give your car away to a valet service or parking because the immobiliser will remain activated and not disabled.
The Ghost is a truly unique and innovative device which works in conjunction with buttons of your car rather than as a separate device. It's not just an effective deterrent to vehicle theft, but it can be used to secure any future vehicles you own. This makes it a better investment than a conventional wheel lock.
Weatherproof tiny device
The Autowatch
Ghost 2 immobiliser Immobiliser is a sophisticated security system that safeguards your car from key cloning and hacking. It also blocks ECU swapping. It is a small, weatherproof device that communicates with the ECU of your vehicle directly over the CAN bus to disable the motor. It can be placed in the vehicle without the need for extra wiring and has been extensively tested to make sure it is compatible with all vehicles. It is also resistant to jamming devices, which is the most common method used by car thieves to circumvent the immobilisers in place.
The benefit of CAN data over traditional systems is that they operate silently. It's not detected by sophisticated RF scanning or code-grabbing technologies and is likewise unreadable by traditional diagnostic tools. The Autowatch ghost does not produce LED indicators and instead uses the buttons inside your vehicle like the steering wheel, centre console or door panels to create a unique, changeable disarm sequence. You can create a sequence that is up to 20 presses long to provide additional security. The iPhone app permits a single, authorised connection with a pairing code that is unique to the Ghost and the communication between the two devices is encrypted.
The
ghost immobiliser price prevents car thieves adding an ignition key that is not in use or replacing the ECU to bypass the immobiliser. The engine can only be started only if a valid PIN has been entered. It can be temporarily operated in the Valet/Service mode (with parameters set, such as a 30mph speed limit), so you can offer your vehicle to a valet or service without entering a code.
Every vehicle is tested
The Autowatch Ghost is the first aftermarket CANbus immobiliser. It can be connected to the wiring of your vehicle and also to the engine control unit (ECU). The device snoops on electronic signals to block your car's system from running its normal startup routine until you input a custom passcode. The system can be turned on or off through your smartphone's app, without the need for additional wires.
The standard factory immobilisers function by using a transponder that is embedded in the key. It transmits a message to the ECU. The car will start when the correct code is transmitted. However, if the transponder from a different vehicle is used instead, the immobiliser will not recognize it. This allows the vehicle to be stolen and then started. The
ghost Immobiliser birmingham immobiliser has been developed by an South African company at the top of the line in vehicle security technology. It protects you from hacking or key cloning and even key theft. The only way thieves could take your car is physically towing it away and even then, they would not be able to drive it.
Ghost makes use of buttons in your vehicle, like the indicator stalk, the steering wheel, and the door panels, to create a unique PIN code which must be entered to use your car. This is performed without the need for additional hardware like a key-fob and can be up to 20 presses long. It is also inaccessible to diagnostic equipment and does transmit radio frequency signals, which means thieves cannot make use of sophisticated RF scanners or code grabbing technologies to detect that an installation has been made.
Unlike physical anti-theft devices like clamps or wheel locks Ghost is covertly integrated into the vehicle to ensure that it can't be disabled or removed by thieves. It is more difficult to remove than a car alarm that requires disarming using an action sequence. This makes it a fantastic complement to an GPS tracking device which can be used to track your vehicle after it's stolen.
Override of emergency PIN code
You don't have to look far on social media to find stories or videos about cars that have been stolen using the most advanced technology tools. This includes key-cloning and hacking devices that allow them to start your vehicle without your original key fobs.
The Ghost immobiliser was designed to combat this and provide you with an additional layer of security to prevent your vehicle from being targeted by thieves. It creates an individual pin code by pushing the buttons on your steering wheel, door panel, and the centre console. The unique pin code is entered alongside your original key fob in order to stop the engine from getting started. The unique PIN for override is on the black card you will receive following your installation. It's easy to remember as there are no LED indicators.
The device is hidden within the vehicle's wires, and does not emit radio signals, which means it cannot be identified by modern criminals with diagnostic software that can detect the type of security system you have installed. This makes it a fantastic alternative to an alarm.
Contrary to most security systems that have a relay in the engine bay these CANBUS Immobilisers communicate with the vehicle's ECU and BCM via the CAN data bus (brand dependent). This allows them to block a vehicle completely by sending a digital block to the ECU and engine.
It is also possible to connect an analog immobiliser, alarm or tracker to these systems, however this must be stated prior to the installation of the device. They are also compatible with service/valet modes and an excellent alternative to a tracking device if you take your car into the dealer to address an electrical issue.
Service/Valet mode
In recent years there has been an increase in the number of vehicles that are stolen without owners' keys. With the ease of access to key cloning tools and door lock pick sets it is now much easier for thieves to take your prized possessions. We have created the Autowatch Ghost Immobiliser to combat this. It stops your car from being driven, even if you keys have been copied.
It connects directly to your vehicle's ECU (Engine Control Unit) via the CAN data circuit.