Brass compression fittings are available in three varieties:
Compressors: These are the most common brass compression fittings used today. Three components: an outer sleeve, ferrule or compression ring. Compression coupling is also called "potable water fitting". Fitting Body (Adapter, coupling, Elbow or Tee) Compression fitting usually requires a stainless steel screw thread, an adapter ring, and some type of connection block to seal the fitting. Should you have any questions relating to where in addition to tips on how to use relevant webpage, you'll be able to email us in our web-site. Sometimes a plastic compression hose coupling is also available.
Tubing: Tubing is a flexible tube formed from stamped or molded brass, aluminum or plastic. It is used to carry a fluid, typically either a gaseous or a liquid, through an exit port. Most often than not, tubing is used for the transportation of liquids and gases through pipes. However, it can also be utilized to carry liquids and gasses through hose outlets. Tubing fittings usually have an inner liner, an outer liner, and a packing collar, which hold the tubing together. Tubing fittings can be found in different diameters of gauges.
Plastic tube: Usually made from polyethylene, this is the most popular of the three brass compression fittings. The outer coating is usually made of polypropylene or ethylene. They are used for transportation both in the open and closed temperature range. This is a very flexible tube size and as such they are easily molded to different diameters.
Plastic tube: The plastic tube is the smallest of the three brass compression fittings and is often times referred to as a 'punch' or 'quick fit'. As its name implies, it is very quickly molded and is commonly used for low velocity applications, as well as high velocity applications. Unlike the other two tube sizes, the plastic fittings are made out of a solid material, which enables it to withstand pressures that are far greater than its own breaking strength. Because of this feature, this fitting is perfect for pneumatic applications and industrial or commercial pumps. It is very popular among pump repair technicians, as well as for those who are looking to purchase or install industrial pumps.
Stainless steel tubing: As its name suggests, stainless steel tubing is made of stainless steel - which makes it one of the toughest and most durable materials available to us today. And because of its durability, it can withstand a lot of heat without any problems. Since it has a 'sticile' appearance, it blends well with almost all interiors - even when the tube's internal surface is finished or painted. For this reason, stainless steel compression fittings have been used by almost every industry since the mid 19th century.