0 votes
by (160 points)
Autowatch Ghost 2 Immobiliser Installation Service

Install an immobiliser Ghost that is TASSA approved and DBS security checked.

imageThe ghost immobiliser installation (our website) system operates in a completely silent manner on the vehicle's CAN data network and is undetectable to thieves using diagnostic tools since it doesn't emit any radio signals.

Easy to install

Autowatch Ghost is a discreet anti-theft device which can protect your vehicle from key cloning or hacking. It works by using the buttons on your vehicle to create an unique pin code push sequence that must be entered to authorize a start-up for your vehicle. This stops thieves from taking your keys and driving away with your joy and pride or at minimum, delaying your journey to have your car repaired!

The system is simple to install with an approved installer like Car Theft Solutions and doesn't require any wire cutting during installation. It connects directly to the vehicle's CAN data networks so there are no additional 'fobs' or indicators to signal the presence of the device. This makes it extremely difficult for burglars of today to detect and is in contrast to passive anti theft devices like steering wheel locks.

When the Ghost 2 is installed in your Porsche it will be virtually unnoticed by thieves and blocked if they attempt to start your vehicle without entering the pin or app authorization. The system can achieve this by using factory buttons on the steering wheel and center console. You can set up an exclusive sequence of buttons (similar to a pin number) that must be used to start the engine.

Once you've created your own personal disarm sequence you can set your Ghost to Service and Valet mode so that if you're having your vehicle serviced or taken to a garage for work it will still start but will only allow you to start it using your pre-set pin or app. If you forget your PIN you can use the app to find an alternative one, so that you don't have to worry about sharing it to anyone who shouldn't be driving your car!

The Ghost 2 has QR finger print labels that are connected to the International Security Register and registered to you. This gives you an extra level of protection in the event of your vehicle is damaged by parts, as the unique code enables your vehicle to be immediately traced back to you.

Low-maintenance

The car thieves are more sophisticated than ever, and technology has advanced to keep up. Stealth immobilisers were created to stop your vehicle from becoming their next target. Ghost immobilisers Ghost immobiliser functions independently of the car's factory fitted alarm, tracker or other security devices, providing an additional level of security that isn't able to be altered.

This advanced technology connects to your vehicle's CAN Data Network and a personalised PIN code sequence is programmed using the buttons on your steering wheel door cards, or the centre console. If the unique code isn't entered prior to starting the engine the Ghost immobiliser stops it from starting, preventing you and your passengers from leaving the vehicle.

The device is small enough to fit in the vehicle wiring harness. It is weatherproof and silent and does not emit radio frequency signals. This means that it can't be detected using sophisticated RF scanning technologies or code grabbing techniques. Furthermore, since it's connected to the CAN Data Network it can't be disabled by simple wire cutting or circuit jumps, which makes it a low-maintenance device.

If you intend to sell your car at any time, the Ghost immobiliser can be transferred to the new vehicle as long as it meets compatibility requirements. If you decide to change cars in the time you own the Ghost the Ghost will not be deemed obsolete. This is an excellent benefit for Ghost immobiliser installation those who take pride in their vehicle.

Unlike many older generation immobilisers The Ghost does not require an additional key fob or LED signal to function, so it is able to be used in darkness. The PIN can be as brief or as long as you like (up to 20 presses) and it can also be changed in case of emergency, should you forget your PIN. It can be set to valet and service mode, which means that your car can be driven for a short time if you want to leave it at a mechanic's or valet service to do some work.

Unrecognisable to thieves

Standard factory installed immobilisers protect your vehicle by stopping it from starting without the proper code and key fob. However an immobiliser called a Ghost immobiliser operates differently. It communicates with the electronic control unit in your car by connecting to the CAN data circuit. This means that thieves cannot get around the system by reprogramming the ECU or by using other methods. It's also silent and doesn't emit radio signals, making it impossible to detect or fake.

Ghost will protect your rare or expensive vehicle from thieves. You'll be able to rest assured that the money you put in customizing or altering your car is protected.

Ghost is a discrete and simple device that is installed into the wiring of your car. It won't affect the appearance of the vehicle. It connects to the CAN network and communicates through your vehicle's steering wheel or center console buttons. It is easy to install, and it can be concealed to hide it from a thief. It's also low-maintenance and doesn't need a battery or radio signal to operate, making it vulnerable to hacking or copying.

The autowatch Ghost-II anti-key clone immobiliser a sleek new gadget that's able to give your car a high level cost of ghost immobiliser security. The first CAN bus-based aftermarket immobiliser that has been verified by TASSA This system is essential for anyone who is concerned about the safety of their car.

It is crucial to stop car thefts since they are increasing. The Ghost immobiliser is a perfect solution. This smart system locks your vehicle until you enter a unique code or download the app. This makes it difficult for thieves to start your car, even if they have the correct keys.

A Ghost immobiliser can give you peace of mind for a small investment. Particularly if you've spent lots of time and money into your car, it can be very devastating to lose it to criminals. The Ghost immobiliser is the best method to safeguard your pride and joy, so you can keep it where it belongs.

It can be fitted without marks on the body of the vehicle

An immobiliser is a device that stops your vehicle from being stolen without a key fob. Immobilisers are required in new cars since 1998. They are installed into your vehicles CAN data network so thieves cannot detect their presence or disable them by cutting wires. This makes it nearly impossible for thieves to steal your car because they will not be in a position to start the engine without using your key fob or mobile phone using the Autowatch app downloaded. This is particularly important if you have spent time and money on customizing your vehicle since it will prevent them from taking it away without your permission.

The Ghost 2 immobiliser is able to be placed in a hidden location to ensure that it is not observed by anyone who is not properly trained. It is connected to the CAN and functions via your ECU (engine control unit). It is small, works silently and does not transmit radio signals, which means it won't be spotted by thieves. The Ghost also has an internal battery that is easily replaced so it will continue to operate in the event of power failure.

The Ghost will require that a pin code be entered to start the vehicle. This can be done using the app on your smartphone, which means that only you be able to identify the code. You can also put your vehicle into Service/Valet mode which allows your car to start without the PIN number, which is helpful to take it to the garage or valet parking service. You can change your PIN at any time for additional peace of mind.

Your answer

Your name to display (optional):
Privacy: Your email address will only be used for sending these notifications.
Welcome to QNA BUDDY, where you can ask questions and receive answers from other members of the community.
...