Protect Your Pride And Joy With The Ghost Immobiliser
ghost immobiliser fitting Immobiliser can safeguard your valuable property from theft. This system is discrete and does not require additional key fobs in order to operate.
The device utilizes buttons on your vehicle (steering wheels, door panels and centre console) to generate a unique pin sequence that can be modified up to 20 times. This allows your vehicle to start.
Simple PIN code change process
With the rising rate of vehicle theft, a lot of owners are looking to improve their security. There are a myriad of aftermarket security devices available including tracking systems, alarms and immobilisers. However, not all of these are equally efficient in protecting your vehicle. While a tracking system can assist in finding your vehicle in the event of theft, it does not prevent the crime from occurring in the first place. An immobiliser, on contrary, does exactly what it says on the tin: it disables your car's engine to prevent it from being started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it almost impossible for thieves to steal your vehicle.
By using the buttons that are already present in your car, the ghost device creates an exclusive sequence that has to be entered prior to the engine will start. This can be accomplished by using the window, heater or indicator stalk buttons. Additionally it is possible to use a mobile app which can function as an emergency PIN code override and allows the driver to operate the car without the button sequence. This is an excellent option if you want to give your car to valet parking or maintenance. The immobiliser will remain in operation.
The Ghost is a truly unique and innovative device which is used in conjunction with the buttons on your vehicle rather than as a separate device. It is not only an effective deterrent for vehicle theft however, it can be used on future vehicles you own. This makes it a better investment than a traditional wheel lock.
Small, weatherproof device
The Autowatch Ghost Immobiliser is an advanced security device that shields your car from key cloning and hacking. It also stops ECU swapping. It is a small weatherproof device that communicates with the ECU of your vehicle directly over the CAN bus to disable the motor. It can be installed in the vehicle without any wiring and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices which are a typical technique that car thieves use to circumvent immobilisers.
The advantage of CAN data over conventional systems is that they operate silently. It isn't detected by sophisticated RF scanning and code-grabbing techniques as well as detected by traditional diagnostic tools. The Autowatch ghost doesn't produce LEDs, but instead utilizes the buttons in your vehicle, such as the steering wheel, centre console or door panels to create a unique, programmable disarm sequence. You can create a sequence that is as long as 20 presses to provide additional security. The iPhone app is limited to one connection, using the Ghost's unique pairing code. the Ghost. All communication between the two devices is encrypted.
The Ghost also prevents car thieves from using a new key or
Ghost Immobiliser Problems replacing the ECU to bypass the immobiliser and start the engine. The engine will only run only if a valid PIN has been entered. It can also be put into valet/service mode for a temporary operation (with specified parameters, such as a 30mph speed limit) so that you can give your car to a valet service or for maintenance without having to enter a pin code.
Every vehicle is tested
The Autowatch Ghost is the first aftermarket immobiliser for CAN bus that connects to the existing wiring in your vehicle and connects to your engine control unit (ECU). The device is able to intercept signals and prevent your car from starting normally until you enter a specific code. The system can be turned off or on through your smartphone's app without the need for additional wires.
The standard factory immobilisers function by using a transponder that is integrated into the key. This transmits a signal to the ECU. If the correct code is sent the car will begin however, if the transponder is replaced with one from a different vehicle, the immobiliser won't recognize it. This makes it possible for the vehicle to be stolen and started. The Ghost immobiliser was created by an South African company at the forefront of vehicle security systems technology. It protects your pride and joy from hacking, key cloning and even key theft. Only by physically towing your car away can thieves get it, and they would still not be able to drive it.
Ghost makes use of buttons in your vehicle, including the indicator stalk, steering wheel, and door panels, to create an individual PIN code that must be entered to use your vehicle. This is done without the need for extra hardware such as keys-fobs, and can be up to 20 presses long. It is also inaccessible to devices for diagnosis and transmits radio frequency signals, which means thieves cannot make use of sophisticated RF scanners or code grabbing technologies to detect that the system has been set up.
In contrast to the physical devices that prevent theft, such as clamps or wheel locks Ghost is concealed within the vehicle so it can't be taken away or disabled by thieves and is also harder to remove from a car alarm which requires disarming via the use of a button sequence. This makes it a fantastic addition to a GPS tracking device which can be used to track your vehicle after it's been taken.
Override of emergency PIN code
You do not have to look long on social media sites to find stories or videos about cars that have been stolen with the latest technology tools. This includes key-cloning devices and hacking tools that allow thieves to start the vehicle without the original keys.
The Ghost immobiliser has been specifically designed to prevent this and offer an extra layer of security in order to keep your vehicle from being targeted by thieves. It generates an individual pin code by pressing the buttons on your steering wheel, door panel, and centre console. The unique pin code is entered in conjunction with the original key fob to prevent the engine from beginning. The unique override pin can be found on the black card that you will receive following your installation. It's easy to remember as there are no LED indicators.
The device is hidden in the wiring of the vehicle and does not emit radio signals. This means it can't be detected by diagnostic software that can determine the security system you have installed. This makes it a fantastic alternative to a tracking device.
In contrast to other security systems which rely on a relay in the engine bays, these CANBUS immobilisers communicate via CAN databus (brand dependent) with the ECU and BCM of the vehicle. This allows them to shut down a vehicle completely by sending an electronic block to the ECU and engine.
These systems can also be connected to a separate alarm immobiliser or tracker. This should be decided prior to installation. They are also service/valet mode-compatible and a great alternative to a tracker having your car in for repair at the dealers.
Service/Valet Mode
In recent times there has been a rise in the number of vehicles stolen without the owner's keys. It's now easier than ever before to take your joy and pride with the availability of key cloning devices and door lock picks. We've developed the Autowatch
ghost immobiliser price immobiliser Problems (
bullock-bolton.thoughtlanes.net) Immobiliser to combat this. It blocks your car from being driven, even if you keys have been copied.
It connects directly to your car's ECU (Engine Control Unit) via the CAN data circuit. It's completely silent since it doesn't use radio frequency or a key fob.